xylem FlexNet CommandLink II Wireless Interface User Guide

Pandhuan cepet
AQG-10087-05
FlexNet CommandLink II

FlexNet CommandLink II Wireless Interface

The CommandLink® II wireless interface provides access to a complete suite of functional controls within a gas, water, or electric SmartPoint® transceiver. This Bluetooth® enabled device, coupled with a handheld, can perform activations, deactivation, meter read, on-demand reads, and audits of the SmartPoint module.

Pènget: Risk of hot surface. Do not hold the device longer than one (1) minute when operating in an ambient temperature above 40°C (104°F).

Langkah 1: Ngisi daya CommandLink II
You must charge the CommandLink II completely before first use.

1. Plug the charging adapter into a power outlet and connect to the Charging Port located next to the Mag Loop on top of the Command Link II.
   Cathetan: Make sure you have rechargeable batteries installed before using a power outlet.
   Unit sing duwe baterei sing ora bisa diisi ulang ora kudu disambungake menyang stopkontak kanggo ngisi daya.
2. Indikator LED abang madhangi, nuduhake yen unit lagi diisi daya.
3. Unplug the unit when the red LED is no longer illuminated, indicating the CommandLink II is fully charged.
   Cathetan: To power down the CommandLink II immediately, press and hold the power button located on the side of the CommandLink II until the PWR LED turns off.

Langkah 2: Nguripake Command Link II

1. Pencet tombol daya.
2. Lampu LED ijo madhangi nalika CommandLink II kasil powered.

Langkah 3: Nggawe Kemitraan Bluetooth
To use the CommandLink II, you must first establish a Bluetooth partnership with a Windows Mobile, Android, or iOS-equipped handheld device (HHD) or PC.

Isi Paket

• FlexNet CommandLink II
• Tali Bungee (2)
• Adaptor Pengisian Daya (AC/DC)
• Adaptor Pengisian Kendaraan (DC/DC)
• Kasus

Yen nggunakake Piranti Genggam Windows Mobile:

1. Pilih Mulai, banjur Setelan.
2. Select Connections, then select Bluetooth COM.
   Power on the CommandLink II if it is off.
3. Pilih Discover Devices.
   A list of all the Bluetooth-enabled devices in range is generated and displayed.
   If your CommandLink II does not appear in the list, make sure that it is powered on. If it is powered on, power cycle it and select Discover Devices again, and repeat this step.
4. Pilih Panjenengan
   CommandLink II from the list and select Connect.
5. If you are prompted toSet the Bluetooth PIN, enter 0000 and select OK.
6. Pilih OK kanggo metu.
7. Pilih X ing pojok tengen ngisor kanggo metu.
8. Pilih FieldLogic Tools saka menu Start.
9. From the FieldLogic Tools main screen, select Menu, and select Options.
10. Pilih tab FlexNet banjur pilih CommandLink saka dhaptar gulung mudhun Tipe piranti. Aja milih CLxxxxxxxxx_BLE.
11. Pilih Get Status. FieldLogic Tools nyambung karo CommandLink II lan nampilake pesen sukses.
12. Pilih OK.
13. Pilih OK maneh kanggo bali menyang layar Sambungake.

Yen nggunakake Piranti Android:

1. Pilih lambang Setelan.
2. Select Options, then select FlexNet. FieldLogic displays a list of available devices.
3. Pilih + kanggo view layar pasangan sistem.AQG – 10007 – 05
4. Pilih CommandLink II (CLxxxxxxxx) saka dhaptar piranti Bluetooth sing kasedhiya.
5. Pilih Pasangan. CommandLink II sampeyan banjur ditampilake ing dhaptar Piranti sing dipasangake.
6. Bali menyang FieldLogic Tools.
7. Select the newly-paired CommandLink II in the list and select the information symbol.FieldLogic nyambung menyang CommandLink II lan nampilake pesen sukses.
8. Pilih Tutup.
9. Pilih panah mburi kanggo bali menyang layar utama FieldLogic.

Yen nggunakake Piranti Genggam iOS:

1. Pilih lambang Setelan.
2. Pilih Pilihan, banjur pilih FlexNet. FieldLogic mindhai piranti banjur nampilake piranti sing kasedhiya. Dhaptar refresh kanthi otomatis.
3. Jendhela pop-up ijin ditampilake. Pilih OK.
4. Pilih CommandLink II (CLxxxxxxxx) saka dhaptar piranti Bluetooth sing kasedhiya.
   
5. Select your CommandLink II and then select the information symbol.
6. FieldLogic nyambung menyang CommandLink II lan nampilake pesen sukses.
7. Pilih Tutup kanggo bali menyang layar Pilihan.
8. Pilih panah mburi kanggo bali menyang layar utama FieldLogic.

Yen nggunakake PC:

1. Daya munggah CommandLink II.
2. Pilih lambang Bluetooth ing desktop komputer utawa saka menu Start.
3. Saka panel Piranti Bluetooth, pilih Tambah piranti.
4. Komputer sampeyan nggoleki piranti sing bakal ditambahake.
5. Select the icon containing the CommandLink II ID number (CLxxxxxxxx).
   Cathetan: If two numbers appear, make sure you select CLxxxxxxxx. Do not select CLxxxxxxxx_BLE.
6. Pilih Sabanjure.
7. Your computer confirms the successful addition of the CommandLink II.
8. Pilih Tutup kanggo nerusake.
9. Miwiti Alat FieldLogic. Saka layar utama, pilih Alat banjur pilih Pilihan.
10. Pilih FlexNet Settings expander lan pilih CommandLink saka dhaptar gulung mudhun Piranti Komunikasi. Pilih piranti saka dhaptar gulung mudhun Jeneng piranti.
11. Select Get Status.
    FieldLogic Tools connects with the CommandLink II and displays a success message.
12. Pilih OK kanggo bali menyang layar Pilihan.
13. Pilih OK kanggo bali menyang layar Sambungake.

Attach a Strap to the CommandLink II

To attach a strap, slide it in between the slots on the sides of the unit.

AQG – 10007 – 05

Pranyatan kepatuhan

kawigatosan
Any modifications made to this device that are not approved by Sensus may void the authority granted to the user by the FCC to operate equipment.

kawigatosan
Kanggo Kelas B - Radiator sing ora disengaja:
This device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

kawigatosan
Kabar ICES-003 Kelas B—Avis NMB-003, Kelas B
Aparat digital Kelas B iki tundhuk karo Canadian ICES-003.

kawigatosan
Cathetan: Peralatan iki wis dites lan ketemu kanggo tundhuk karo watesan kanggo piranti digital Kelas B, miturut Part 15 saka Aturan FCC.
Watesan kasebut dirancang kanggo menehi pangayoman sing cukup marang gangguan sing mbebayani ing instalasi omah. Peralatan iki ngasilake, nggunakake, lan bisa mancarake energi frekuensi radio lan, yen ora dipasang lan digunakake miturut pandhuane, bisa nyebabake gangguan sing mbebayani kanggo komunikasi radio. Nanging, ora ana jaminan manawa gangguan ora bakal kedadeyan ing instalasi tartamtu. Yen peralatan iki nyebabake gangguan sing mbebayani kanggo panrima radio utawa televisi, sing bisa ditemtokake kanthi mateni lan nguripake peralatan kasebut, pangguna dianjurake kanggo nyoba mbenerake gangguan kasebut kanthi siji utawa luwih saka langkah-langkah ing ngisor iki:

• Reorient utawa pindhah antena panampa
• Tambah pamisahan antarane peralatan lan panrima
• Sambungake peralatan menyang stopkontak ing sirkuit beda saka sing panrima disambungake
• Hubungi dealer utawa teknisi radio/TV sing berpengalaman kanggo njaluk bantuan

kawigatosan
Piranti iki tundhuk karo standar RSS sing dibebasake lisensi Industry Canada. Operasi tundhuk karo rong kondisi ing ngisor iki: (1) piranti iki ora bisa nyebabake gangguan, lan (2) piranti iki kudu nampa gangguan apa wae, kalebu gangguan sing bisa nyebabake operasi piranti sing ora dikarepake.

kawigatosan
This radio transmitter, the Sensus CL201, has been approved by Industry Canada to operate with the antenna types listed below, with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

kawigatosan
Miturut peraturan Industri Kanada, pemancar radio iki mung bisa digunakake kanthi nggunakake antena saka jinis lan entuk maksimal (utawa luwih sithik) sing disetujoni kanggo pemancar dening Industri Kanada. Kanggo nyuda interferensi radio potensial kanggo pangguna liyane, jinis antena lan gain kudu dipilih supaya daya radiasi isotropik sing padha (eirp) ora luwih saka sing dibutuhake kanggo komunikasi sing sukses.

WARNING
There is a danger of explosion if batteries are mishandled or incorrectly replaced. On systems with replaceable batteries, replace only with the same manufacturer and type or equivalent type recommended per the instructions provided in the product service manual.
Aja mbongkar baterei utawa nyoba ngisi daya ing njaba sistem. Aja mbuwang baterei ing geni.
Buang baterei kanthi bener miturut instruksi pabrik lan peraturan lokal.

WARNING
AJA INCINERATE utawa tundhuk sel baterei ing suhu luwih saka 212 ° F. Pangobatan kasebut bisa nyebabake pecah sel.

WARNING
EXPLOSION HAZARD – BATTERIES MUST ONLY BE CHANGED IN AN AREA KNOWN TO BE NON-HAZARDOUS.

xylem.com
SENSUS | 637 Davis Drive | Morrisville, NC 27560 | 800.638.3748 | sensus.com

©2026 Sensus. All products purchased and services performed are subject to Sensus’ terms of sale, available at either sensus.com/TC or 1-800-638-3748. Sensus reserves the right to modify these terms and conditions in its own discretion without notice to the customer. The Sensus logo is a registered trademark of Sensus.
This document is for informational purposes only, and SENSUS MAKES NO EXPRESS WARRANTIES IN THIS DOCUMENT. FURTHERMORE, THERE ARE NO IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES AS TO FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. ANY USE OF THE PRODUCTS THAT IS NOT SPECIFICALLY PERMITTED HEREIN IS PROHIBITED.