Multi-Fungsi Controller
Core(1PCS)-XA003
Manual pangguna
Inti-A11
Fitur
- 2.4Ghz wireless remote control, 10m control distance with an ultra-small size.
- High cost-performance ratio, suitable for car, ship, and tank models, etc.
- Provide up to 10 channels for connecting different devices.
- Input Transmitter Voltage: 4.5V~12.6V（1S-3S）, operating current: 65mA.
- Input Receiver Voltage: 7.4V-12.6V（2S-3S）, standby current: 60mA, operating current: 200~300mA, maximum current: 3A.
- Support configuration on mobile phones& PCs, with a user-friendly interface.
Receiver & Transmitter Shield
Remote Control Transmitter Shield
On the left and right sides of the transmitter shield, there are 3 ADC input channels respectively. Below it, there are 4 digital input channels. The gray slot on the back is the slot for the multi-function controller core. It can be powered through the XH2.54 power input.
- ADC input port L1~L3，R1~L3: 3pin SH1.0 slot. Connectable with single/dual axis joystick module, three-position rocker switch module, etc.
- Digital input Port K1~K4: 2-pin SH1.0 slot. Connectable with a momentary button module, etc.
- XH2.54 DC power input: 2-pin XH2.54 slot. Connectable with a 4.5V~12.6V power supply.
Remote Control Receiver Shield
On the left and right sides of the receiver shield, there are, respectively, a DC motor port and a WS2812 port. In the center, there are 4 servo ports. It can be powered through the XH2.54 power input.
- DC Motor Port M1、M2: 2pin SH1.0 slot. Connectable with a DC motor, supporting forward and reverse rotation control& PWM speed regulation.
- WS2812 Port D1、D2: 3pin SH1.0slot. Connectable with WS2812 LED hubs or other light strips that use the WS2812 protocol.
- Servo Port S1~S4: 3-pin header. Connectable with universal 5V servo motors.
- Core Slot: A double-row gray slot. Connectable with a multi-function controller core.
- XH2.54 Power Input: 2-pin XH2.54 slot. Connectable with a 7.4V~12.6V power supply.
Inti Kontrol Multi-Fungsi
- Stamp Cut: Solderable Pinout. It allows users to solder leads to achieve customized circuit connections.
- Tombol Reset: Press to reset the main program.
- Tombol pangguna: Custom Function.
- Tipe-C Port: Type-C Port. Connect to the PC via a data cable for programming and burning the program.
- Pin Header: Pin Header. Connectable with Shield.
Hardware connection between the controller core and the remote control transmitter/receiver shield
Minangka ditampilake ing gambar, inti controller, tameng panrima remot kontrol, lan tameng pemancar remot kontrol duwe simbol antena. Nalika nggawe sambungan, iku perlu kanggo mesthekake yen orientasi saka telung simbol iki padha lan lencana cocog kanggo saben liyane siji.
Orientasi saka telung simbol iki padha.
Pin cocog karo siji liyane.
Definisi Indikator Status Sistem
- Powered on but not connected: green light on
- Bluetooth connected: blue light on
- 2.4GHz connected: yellow light on
- Bluetooth& 2.4GHz connected: light flashes alternately between blue and yellow
- Profile upgrading: green light flashes at a frequency of 2Hz and continues until the transmission ends.
- Control object recognition: The green light flashes at a frequency of 1 Hz for 5 seconds.
Connect to the RC Transmitter & Receiver on the PC client.
Daya inti controller liwat port Type-C utawa XH2.54 Power Port ing tameng expansion.
Mbukak klien CyberBrick, pindhah menyang Manajemen Piranti
Klik [+] kanggo nemokake piranti sampeyan
Sambungake piranti kanthi ngetik kode PIN. Yen PIN durung disetel sajrone sambungan pisanan, konfirmasi langsung.
After a successful connection, the indicator of the controller core lights blue, and the client displays this device.
Click on the expansion symbol in the upper right corner of the device. If you have connected multiple devices, click on Recognize, and the status indicator of the selected device will flash green; if you need to disconnect from the selected device, click on Disconnect.
Click on the device, and you can change the name of the device in the upper right corner to make it easier to identify it when there are multiple devices.
If you need to change the PIN code of the device, you can click Modify in the lower right corner and enter the new PIN code.
Ngatur inti controller profile
Klik ing Konfigurasi, klik Nggawe Konfigurasi, lan miwiti karo cithakan, utawa konfigurasi kosong [Custom].
Ing kene kita njupuk konfigurasi kosong khusus minangka mantanample, click on Custom, and then click on Edit in the configuration list below.
Sawise ngetik antarmuka konfigurasi, pisanan, klik Tambah panrima ing sisih kiwa, lan ketik jeneng panrima.
Klik ing sambungan hardware ing ndhuwur banjur seret piranti panrima lan piranti controller menyang posisi sing cocog.
Klik kanggo miwiti pasangan. Sawise dipasangake kanthi sukses, indikator status piranti kasebut kudu sumunar biru lan kuning kanthi gantian.
Sawise ngowahi konfigurasi, elinga kanggo nyimpen konfigurasi lokal karo Simpen Config ing pojok tengen ndhuwur, lan nganyari konfigurasi kanggo piranti karo Send Config.
Dhaptar aturan FCC sing ditrapake
FCC Bagean 15.247
Label lan informasi kepatuhan
FCC ID label on the final system must be labeled with “Contains FCC ID: 2A6J8-COREA11” or “Contains transmitter module FCC ID: 2A6J8-COREA11”.
Informasi babagan mode tes lan syarat tes tambahan
Contact Shenzhen Tuozhu Technology Co., Ltd. will provide a stand-alone modular transmitter test mode. Additional testing and certification may be necessary when multiple modules are used in a host.
Pengujian tambahan, Bagian 15 Penafian Subpart B
Kanggo mesthekake tundhuk karo kabeh fungsi non-transmitter, Produsèn inang tanggung jawab kanggo mesthekake selaras karo modul (e) diinstal lan kanthi operasional. Kanggo example, if a host was previously authorized as an unintentional radiator under the Supplier’s Declaration of Conformity procedure without a transmitter-certified module and a module is added, the host manufacturer is responsible for ensuring that, after the module is installed and operational, the host continues to be compliant with the Part 15B unintentional radiator requirements. Since this may depend on the details of how the module is integrated with the host, Shenzhen Tuozhu Technology Co., Ltd. shall provide guidance to the host manufacturer for compliance with the Part 15B requirements.
FCC Warning
Piranti iki tundhuk karo Part 15 saka Aturan FCC. Operasi tundhuk karo rong syarat ing ngisor iki:
(1) Piranti iki bisa uga ora nyebabake gangguan sing mbebayani, lan (2) piranti iki kudu nampa gangguan sing ditampa, kalebu gangguan sing bisa nyebabake operasi sing ora dikarepake.
CATATAN 1: Sembarang owah-owahan utawa modifikasi ing unit iki sing ora disetujoni kanthi jelas dening pihak sing tanggung jawab kanggo kepatuhan bisa ngilangi wewenang pangguna kanggo ngoperasikake peralatan kasebut.
Pernyataan Paparan Radiasi FCC:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure compliance.
Cathetan 1: This module is certified to comply with the RF exposure requirement under mobile or fixed conditions; this module is to be installed only in mobile or fixed applications.
A mobile device is defined as a transmitting device designed to be used in locations other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. Transmitting devices designed to be used by consumers or workers that can be easily relocated, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20-centimeter separation requirement.
Piranti tetep ditetepake minangka piranti sing diamanake sacara fisik ing sak panggonan lan ora bisa gampang dipindhah menyang lokasi liya.
Cathetan 2: Any modifications made to the module will void the Grant of Certification. This module is limited to OEM installation only and must not be sold to end-users; end-user has no manual instructions to remove or install the device, only software or operating procedure shall be placed in the end-user operating manual of final products.
Cathetan 3: Modul kasebut mung bisa dioperasikake nganggo antena sing wis sah. Sembarang antena sing saka jinis padha lan gain padha utawa kurang arah minangka antena sing sah karo radiator disengojo bisa dipasarke karo, lan digunakake karo, radiator disengojo.
Cathetan 4: For all products marketed in the US, OEM has to limit the operation channels in CH1 to CH11 for the 2.4G band by supplying a firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change.
P WNGET IC
Piranti iki ngemot pemancar sing ora duwe lisensi sing tundhuk karo RSS (s) sing dibebasake lisensi Inovasi, Ilmu Pengetahuan lan Ekonomi Kanada. Operasi tundhuk karo rong syarat ing ngisor iki:
- Piranti iki bisa uga ora nyebabake gangguan.
- Piranti iki kudu nampa gangguan apa wae, kalebu gangguan sing bisa nyebabake operasi piranti sing ora dikarepake.
Pernyataan Paparan Radiasi IC:
This device and its antenna(s) must not be co-located with any other transmitters except by IC multi-transmitter product procedures. Referring to the multi-transmitter policy, multiple-transmitter(s) and modules (s) can be operated simultaneously without reassessment permissive change.
Peralatan kasebut tundhuk karo watesan paparan radiasi IC RSS-102 sing ditemtokake kanggo lingkungan sing ora dikontrol. Peralatan iki kudu dipasang lan dioperasikake kanthi jarak minimal 20cm ing antarane radiator & awak sampeyan.
This module is limited to OEM installation only and must not be sold to end-users; end-user has no manual instructions to remove or install the device, only software or operating procedures shall be placed in the end-user operating manual of final products. Additional testing and certification may be necessary when multiple modules are used.
Sembarang owah-owahan utawa modifikasi sing ora disetujoni kanthi jelas dening pabrikan bisa ngilangi wewenang pangguna kanggo ngoperasikake peralatan iki.
The end product must be labeled in a visible area with the following: “Contains IC: 28436-COREA11 “.
Inti Kontrol Multi-Fungsi
Spesifikasi Produk
| Nomer Item | Komponen | Fungsi |
| 1 | W52812LED | RGB system status indicator |
| 2 | Stamp Cut | Solderable pinout |
| 3 | Tombol Reset | Press to reset the main program |
| 4 | Port Tipe-C | Burning firmware & programming |
| 5 | Tombol pangguna | Fungsi khusus |
| 6 | Pin Header | Connectable with various shields |
| 7 | Orientation Mark | Ensure proper installation alignment |
| ID produk | XA003 |
| Model | Inti A11 |
| Tipe-C Input Voltage | DC 5V |
| VBAT Input Voltage | 3.7V-12.6V |
| Tipe Antena | Antena PCB Kab |
| Remote Control Jarak | Nganti 100m (ing ruang terbuka) |
| Bobot | 6g |
| Ukuran | 27 * 22 mm |
Dokumen / Sumber Daya
 |
Tuozhu Core-A11 Multi Fungsi Controller [pdf] Manual pangguna Inti-A11, Inti-A11 Multi Fungsi Controller, Multi Fungsi Controller, Controller |