SwitchBot SBT_W5502300 Switch Bot Relay Switch 1
Pambuka
- The SwitchBot Relay Switch (W5502300) is a smart relay module designed to convert traditional, non-smart electrical devices (lights, fans, motors, etc.) into remotely controllable devices. Embedded within existing wiring, it acts as an intelligent on/off switch that can be controlled via Wi-Fi, Bluetooth, or integrated into smart home ecosystems (e.g. via Matter, voice assistants). The “MAX 16A” name suggests it is intended to handle loads up to 16 A for AC current. The device also has safety features like overcurrent/overload protection built in.
- According to its FCC test report, the model is indeed W5502300.
- SwitchBot markets a “Relay Switch 1” that shares many of its functions (Bluetooth repeater, local control, compatibility with smart home platforms) with this family.
- So, W5502300 is a version of or related to the “MAX 16A Relay Switch” family that SwitchBot offers.
Spesifikasi
| Spesifikasi | Rincian |
|---|---|
| Bahan | — (Not specified) |
| Ukuran | 42 × 36 × 16 mm (1.6 × 1.4 × 0.6 inci) |
| Bobot | 27 g (0.9 oz.) |
| Suhu operasi | –20 °C nganti 40 °C (–5 °F nganti 105 °F) |
| Kelembapan Operasi | Nganti 70% RH |
| Input AC | 100 nganti 240 V, 50/60 Hz |
| DC Input | 24 to 48 V, 12 V |
| Vol. Output AC Makstage | 240 V |
| Vol. Output DC Makstage | 30 V |
| Arus Output AC Max | 16 A |
| Max DC Output Saiki | 10 A |
| Konektivitas | IEEE 802.11 b/g/n, 2.4 GHz Wi-Fi, Bluetooth LE |
Cathetan / caveat:
- The “MAX 16A” name indicates the maximum current rating under ideal conditions, but actual safe loading may be lower depending on ambient temperature, wiring quality, and installation conditions.
- Always allow a margin/safety buffer rather than loading continuously at the maximum rating.
- The DC input spec can depend on the variant; in some documentation, “DC input: 12 V” is given.
Panggunaan & Aplikasi
Use Cases / Applications
- Kontrol cahya: You can place the relay inline with a light circuit (before the main switch) so that lights can be turned ON/OFF via the SwitchBot app, schedules, voice commands, or automations.
- Fans, exhausts, motors: Suitable for moderate loads (within current rating). You may control fans, ventilation systems, roller shutters (if motor rating is within limits), etc.
- Garage doors/gate motors: If the motor’s current draw is within the safe margin, you can use it to control on/off of gates or rolling doors.
- Integrasi omah pinter: Using Matter, voice assistants (Alexa, Google Home, Siri), and automation scenes, you can incorporate the relay into routines (e.g. turn off all lights at certain times).
- Bluetooth repeater role: When placed in a location, it can act as a repeater/range extender for other SwitchBot Bluetooth devices, improving connectivity in large homes.
Installation & Setup Guidance
- Power off circuit: Always disable power (turn off breaker) before wiring.
- Wiring: Insert the relay in series with the live (hot) line of the load you want to control. The relay will switch that line ON/OFF. Ensure the neutral and ground remain intact as per local electrical codes.
- Pemasangan: The relay is small and can be placed inside junction boxes, behind switches, or within enclosures, provided there is ventilation.
- Pairing/configuring:
- Use the SwitchBot app to detect the relay over BLE or via Wi-Fi.
- Set up the device in your smart home ecosystem (Matter, Alexa, etc.).
- Define automations, schedules, scenes, or triggers.
- Testing: After wiring and powering, test control via the app and manual switch (if present) to ensure correct behavior.
- Priksa safety: After installation, monitor for excessive heat, signs of strain, and correct function in overloading or fault conditions.
Laku paling apik
- Always leave a safety margin (e.g. don’t run at 16 A continuously; design for lower current).
- Use adequate wire sizing (thickness) for the load to reduce voltage drops or heating.
- Ensure enclosure ventilation so the relay does not overheat.
- Avoid placing it in extremely hot or humid locations outside its rated operating conditions.
- If uncertain about wiring, engage a qualified electrician.
Isi Paket
Persiapan
Sampeyan mbutuhake:
- A smartphone or tablet using Bluetooth 4.2or later.
- Versi paling anyar saka aplikasi kita, bisa didownload liwat Apple App Store utawa Google Play Store.
- SwitchBot count, you can register via our app or sign in to your account directly if you already have one.
Persyaratan sistem iOS lan Android
https://support.switch-bot.com/hc/en-us/articles/12567397397271
Produk Overview
- Relay Switch 1 is a smart relay designed for managing the power supply of connected devices.
- It supports features such as remote control of appliances via mobile phone and scheduled operations.
- It can be installed into standard electrical wall boxes, behind power sockets, light switches, or other compact spaces.
- Muat terminal output
- Ngalih terminal
- Terminal input sirkuit mbukak
- DC positive 12 V terminal
- Live (100-240 V) terminal
- Terminal netral
- terminal lemah DC
- DC positive (24-48 V) terminal
- Tombol
- Lampu Indikator LED
Instalasi
Ati-ati
Before installation, turn off the main power switch to prevent electric shock. Only begin testing or connecting cables after confirming the circuit is de-energized.
Nyambung menyang Sumber Daya AC
- Remove the exterior shell of your wall box or outlet.
- Connect the neutral wire to the N terminal, the live wire to the L terminal, and the load circuit to the O and I terminals of the Relay Switch.
- If you want to keep the control functionality of your wall box or outlet,connect its common terminal to the L terminal, and the control wire to the SW terminal of the Relay Switch.
- Then, reinstall the exterior shell of your wall box or outlet.
Turn on the power. Your Relay Switch will be discoverable within 10 minutes after powering on. Add it via our app during this time. If the connection times out, press the button on it for 2s or turn off the power and on again.
Connecting to DC Power Supply
For 24—48 V power supply:
Remove the exterior shell of your wall box or outlet. Connect the DC+ wire to the 
terminal, the GND wire to the L terminal, and the load circuit to the O and I terminals of the Relay Switch.
For 12 V power supply:
Remove the exterior shell of your wall box or outlet. Connect the 12 V DC+ wire to the +12V terminal, the GND wire to the L terminal, and the load circuit to the O and I terminals of the Relay Switch.
- If you want to keep the control functionality of your wall box or outlet, connect its common terminal to the terminal, and the control wire to the SW terminal of the Relay Switch. Then, reinstall the exterior shell of your wall box or outlet.
- Turn on the power. Your Relay Switch will be discoverable within 10 minutes after powering on. Add it via our app during this time. If the connection times out, press the button on it for 2s or turn off the power and on again.
Lampu Indikator LED
| Lampu Indikator LED | Katrangan |
|---|---|
| Lampu putih on | Piranti diuripake |
| Lampu putih mati | Piranti dipateni |
| Cahya biru kedhip cepet | Device being added |
| Lampu biru kedhip alon-alon | Nyambung menyang jaringan |
| Lampu biru mati | Disambungake menyang jaringan |
| Blue light on and then off | Setelan pabrik dibalèkaké |
Ngreset Setelan Pabrik
- Pencet terus tombol piranti kanggo 1 5 detik kanggo mulihake setelan pabrik. Elinga yen operasi iki bakal mbusak kabeh data lan setelan historis.
Nganyari Firmware
- Kanggo nambah pengalaman pangguna, kita bakal ajeg ngeculake nganyari perangkat kukuh kanggo ngenalake fungsi anyar lan ngatasi cacat piranti lunak sing bisa kedadeyan sajrone panggunaan.
- When a new firmware version is available, we will send an upgrade notification to your account via our app. When upgrading, please make sure your product has sufficient battery or stay powered on and make sure your smartphone is within range to prevent interference.
Nyetel prakara
Pindai kode QR kanggo mriksa pandhuan persiyapan Matter.
Safety
- Proper wiring & insulation: Ensure wires are correctly terminated, insulated, and securely fastened. Loose connections can cause arcing and overheating.
- Proteksi kakehan: Do not exceed the maximum rated load (16 A AC). In case of an overload, the device’s internal protection should trip — but relying on that continuously is not advisable.
- Thermal limits: Do not install in environments exceeding –20 °C to +40 °C or in excessive humidity (>70% RH).
- Fire-retardant materials: The casing is designed to be flame-retardant (V0 rating) to reduce fire risk in case of internal faults.
- Isolation and safety clearance: Maintain required clearances between live parts and earth or other conductive parts to prevent leakage or short circuits.
- Surge / transient protection: The relay may not inherently protect against high-voltage surges or lightning. Use surge protectors or line filters if your area is prone to such events.
- Avoid moisture/water ingress: Do not place the relay where water, condensation, or splashes might reach it. Use enclosures if outdoors.
- Reset/fault recovery: If the device trips due to overcurrent or fault, power down, inspect the circuit, and correct the cause before restoring power.
- Compliance & standards: Ensure your installation adheres to local electrical codes and standards. Even though the product is FCC/certification listed (W5502300 has FCC documentation) local wiring codes and protections must be respected.
Penafian
- Kita ora tanggung jawab kanggo karusakan apa wae sing disebabake dening bencana alam kayata lindhu, kilat, angin lan karusakan banyu, geni sing ora disebabake dening produk, tumindak pihak katelu, nyalahi panggunaan sing disengaja utawa ora sengaja dening pelanggan, utawa kahanan panggunaan ora normal liyane.
- Kita ora tanggung jawab kanggo karusakan apa wae sing kedadeyan amarga panggunaan utawa ora bisa nggunakake produk iki (kayata owah-owahan utawa mundhut konten sing direkam, mundhut bathi bisnis, gangguan bisnis).
- Kita ora tanggung jawab kanggo kerusakan sing disebabake ora selaras karo isi ing manual iki.
- Kita ora tanggung jawab kanggo karusakan sing disebabake dening tumindak sing ora bener utawa nggunakake piranti sing ora dikontrol dening kita.
Garansi
- We njamin kanggo pemilik asli prodhuk sing prodhuk bakal bebas saka cacat ing bahan lan workmanship. Wigati dimangerteni manawa garansi winates iki ora kalebu:
- Produk sing dikirim ngluwihi periode garansi winates asli.
- Produk sing wis nyoba ndandani utawa ngowahi.
- Produk sing kena tiba, suhu ekstrem, banyu, utawa kahanan operasi liyane ing njaba spesifikasi produk.
- Karusakan amarga bencana alam (kalebu nanging ora winates ing kilat, banjir, tornado, lindhu, utawa angin topan lsp).
- Kerusakan amarga penyalahgunaan, penyalahgunaan, kelalaian utawa korban (umpamane geni).
- Kerusakan liyane sing ora disebabake cacat ing pabrikan bahan produk.
- Produk sing dituku saka pengecer sing ora sah.
- Bagean sing bisa digunakake (kalebu nanging ora winates ing baterei).
- Nyandhang produk alami.
Kontak & Dhukungan
- Umpan Balik: Yen sampeyan duwe masalah utawa masalah nalika nggunakake produk, kirim umpan balik liwat aplikasi liwat Profile > Dhukungan kaca.
Persiyapan lan Ngatasi Masalah:
Email Dhukungan:
Pitakonan
Q2: What happens if the load exceeds 16 A or there is a short circuit?
A2: The relay should include overload/overcurrent protection, which will interrupt the circuit to protect itself and the wiring. However, this is a last line of defense, not a substitute for proper circuit protection (like fuses or breakers). Always size your circuit protection (breaker, fuse) to safely protect the wiring and the relay device. In a fault situation, power should be cut, the cause addressed, and the relay reset or replaced if damaged.
Dokumen / Sumber Daya
 |
SwitchBot SBT_W5502300 Switch Bot Relay Switch 1 [pdf] Manual pangguna SBT_W5502300 Switch Bot Relay Switch 1, SBT_W5502300, Switch Bot Relay Switch 1, Relay Switch 1, Switch 1 |