S2B-logo

S2B LEDWHP RF 2 Gantungan Kunci Remote

S2B-LEDWHP-RF-2-Key-Keychain-Remote-product

Spesifikasi

  • Bluetooth Controller karo tombol pasangan
  • 2-tombol ON/OFF Remote
  • TRUE MODS kompatibilitas Smartphone App
  • Customizable device settings for patterns, colors, speed, brightness, and sensitivity

Controller Bluetooth

Turn on your device and put the device into pairing mode by pressing and holding the pairing button for 5 seconds. The device will flash blue continuously to indicate that it is in pairing mode.

S2B-LEDWHP-RF-2-Key-Keychain-Remote-fig- (1)

2-tombol ON/OFF Remote

  1. Press the “On” button on the remote and hold.
  2. If pairing is successful, the device will turn Green.
  3. If pairing is not successful, the device will turn Red.
  4. Turn the device off, then back on, and repeat the pairing processS2B-LEDWHP-RF-2-Key-Keychain-Remote-fig- (2)

Operating with TRUE MODS Smartphone A

  1. Open the TRUE MODS Connect App &log in using the method of your choice.S2B-LEDWHP-RF-2-Key-Keychain-Remote-fig- (3)
  2. To pair devices, there must be at least one vehicle profile. Miwiti nggawe pro kendaraanfile by tapping on the hamburger menu and then on “Manage Garage”.S2B-LEDWHP-RF-2-Key-Keychain-Remote-fig- (4)
  3. In the “Manage Garage” screen, tap the “+” Icon and follow the on-screen instructions to add your vehicle. Your vehicle will now be available on the “Manage Garage” screen. Tap the “X” on the top left to return to the main page.
  4. Turn on your device and put the device into pairing mode by pressing and holding the pairing button for 5 seconds.S2B-LEDWHP-RF-2-Key-Keychain-Remote-fig- (5)
  5. Piranti bakal kerlip biru terus-terusan kanggo nuduhake yen ana ing mode pasangan.
  6. On the ap, tap the “+” to search for the device, then tap the device name to begin pairing.S2B-LEDWHP-RF-2-Key-Keychain-Remote-fig- (6)
  7. If pairing is successful, the device will turn Green. Continue following the on-screen instructions to finish adding the device.
  8. If pairing is not successful, the device will turn Red. Turn the device off, then back on, and repeat the pairing process.S2B-LEDWHP-RF-2-Key-Keychain-Remote-fig- (7)
  9. To change device settings, tap on the device. This will take you to the device settings screen.
  10. In the device settings scr, you can choose different patterns and pattern directions, preset color gradients or solid colors, set the speed and brightness for each pattern, and adjust the sensitivity of audio-based patterns.S2B-LEDWHP-RF-2-Key-Keychain-Remote-fig- (8)
  11. Settings will reflect on the device in real time. Some settings may not be available depending on the pattern chosen.

Pranyatan FCC

Piranti iki tundhuk karo bagean 15 saka Aturan FCC.

Operasi tundhuk karo rong syarat ing ngisor iki:

  1. Piranti iki bisa uga ora nyebabake gangguan mbebayani, lan
  2. Piranti iki kudu nampa gangguan sing ditampa, kalebu gangguan sing bisa nyebabake operasi sing ora dikarepake.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
instalasi.

Yen peralatan iki nyebabake gangguan sing mbebayani kanggo panrima radio utawa televisi, sing bisa ditemtokake kanthi mateni lan nguripake peralatan kasebut, pangguna dianjurake kanggo nyoba mbenerake gangguan kasebut kanthi siji utawa luwih saka langkah-langkah ing ngisor iki:

  • Reorient utawa pindhah antena panampa.
  • Tambah pamisahan antarane peralatan lan panrima.
  • Sambungake peralatan menyang stopkontak ing sirkuit beda saka sing panrima disambungake.
  • Hubungi dealer utawa teknisi radio/TV sing berpengalaman kanggo njaluk bantuan.

Ati-ati
Sembarang owah-owahan utawa modifikasi sing ora disetujoni kanthi jelas dening partai.

Pitakonan

P: Apa sing kudu ditindakake yen piranti ora bisa dipasangake?
A: If pairing is unsuccessful, turn the device off, then back on, and repeat the pairing process. Ensure that both devices are in pairing mode and try again.

P: Apa aku bisa ngatur pola lan warna sing beda kanggo saben piranti?
A: Yes, using the TRUE MODS Smartphone App, you can choose different patterns, color gradients, solid colors, set speed and brightness, and adjust sensitivity for each device individually.

Dokumen / Sumber Daya

S2B LEDWHP RF 2 Gantungan Kunci Remote [pdf] Manual pangguna
2BNZW-LEDWHP, 2BNZWLEDWHP, LEDWHP RF 2 Gantungan Kunci Remote, LEDWHP, RF 2 Gantungan Kunci Remote, 2 Gantungan Kunci Remote, Gantungan Kunci Remote, Remote

Referensi

Ninggalake komentar

Alamat email sampeyan ora bakal diterbitake. Kolom sing dibutuhake ditandhani *