Wisaya 2 Ngalih 2 NYXI TMR Game Controller

Dear Gamer,
Matur nuwun kanggo tuku produk kita.
Sadurunge nggunakake produk, waca manual produk kasebut kanthi teliti.

ISI PAKET

• NJ10 Left Controller x1
• NJ10 Right Controlle x1
• NJ10 Jembatan Tengah x1
• Multi-fungsi panrima x1
• Kabel Pengisian USB-C x1
• Receiver Extension Cable x 1

PARAMETER TEKNIS

• Konektivitas: Bluetooth 5.0, 2.4G
• Wireless Battery Capacity: 400mAh (saben controller)
• Ngisi daya: 5V/0.4A liwat USB-C
• Bahan: PC + ABS + Metal + Silicone
• Bobot: 225g
• ukuran: 106*155*55,smm

SPESIFIKASI DIAGRAM

Nyambung menyang NINTENDO SWITCH

1. Geser controller mudhun ing sadawane ril ing loro-lorone layar console nganti klik. Antarmuka "Controllers" ing console bakal nampilake pengontrol kiwa / tengen sing disambungake.
2. Kanggo mbusak controller, pencet tombol release ing mburi controller lan geser munggah.
3. Nalika console diuripake, copot controller saka ril bakal kanthi otomatis nggawe sambungan Bluetooth karo Switch.
4. Nalika console dipateni, copot pengontrol saka ril banjur pencet tombol Ngarep kanggo nguripake lan nyambungake maneh.
5. Sawise kasil nyambungake menyang Switch, pengontrol kedher sajrone 1 detik.

RECEIVER CONNECTION TO PC

(XINPUT MODE)

1. Pencet terus Tombol Ngarep nganti 3 detik kanggo nguripake. LED 1-4 ing loro pengontrol bakal kerlip ijo kanthi urutan.
2. Insert the receiver into the PC and press and hold its button until the LED blinks rapidly.
3. Ngenteni pasangan.

(DINPUT MODE)

1. In Xinput mode, press and hold A+ B + Home to switch to Dinput mode. LEDs 1-4 will blink green three times.
2. Repeat the same key combination to switch back to Xinput mode.

KONEKSI RECEIVER menyang PC / NGC
Pencet terus tombol ngarep nangani tengen kanggo 5 detik kanggo tum ing piranti, lan LED1-4 nangani tengen bakal kerlip ijo.

Tancepake panrima menyang komputer, banjur pencet terus tombol ing panrima nganti LED kelip-kelip cepet.

Ngenteni gagang lan panrima sing pas kanggo dipasangake, lan lampu LED panrima lan gagang bakal urip.

Pencet terus tombol ing panrima maneh nganti LED kelip-kelip cepet, lan pencet terus tombol layar ing nangani kiwa kanggo 5 detik nganti LED1-4 saka gagang kiwa sumunar ijo.

Ngenteni gagang kiwa lan panrima sukses dipasangake sadurunge bisa digunakake kanthi normal.

RECEIVER disambungake menyang WII
Tum on the Wii console, enter the game, and connect the original controller. After entering the game, unplug the original adapter, and then plug the NJ10 receiver into the console, and press and hold the button on the receiver until the LED flashes quickly.
Pencet terus tombol ngarep nangani tengen kanggo 5 detik kanggo tum ing piranti, lan LED1-4 nangani tengen bakal kerlip ijo.
Ngenteni gagang lan panrima sing pas kanggo dipasangake, lan lampu LED panrima lan gagang bakal urip.

Pencet dawa tombol ing panrima maneh nganti LED kelip-kelip cepet, lan dawa penet tombol layar ing nangani kiwa kanggo 5 detik nganti nangani kiwa LED1-4 kelip-kelip banyu ijo.

KALIBRASI JOYSTICK

1. Press SL+ SR+ + Button (left controller: – Button) to enter calibration mode. Rotate the joysticks and press the same keys again to exit. A 1-second vibration confinns completion.
2. Switch System Calibration: Navigate to Settings> Controllers & Sensors Calibrate Control Sticks and follow on-screen instructions.

KALIBRASI TRIGGER

Press SL+ SR+ Home (left controller: Capture Button) to enter calibration mode. Press triggers fully to calibrate. Exit using the same keys (1-second vibration confirms completion).

6-AXIS GYROSCOPE KALIBRASI

1. Ngalih: Navigate to Settings> Controllers & Sensors > Calibrate Motion Controls.
2. Place the controller on a flat surface and follow on-screen prompts. Press -and + Buttons to complete calibration.

FUNGSI TURBO

1. Tombol sing didhukung: D-pad, A, B, X, Y, L, R, ZL, ZR.
2. Aktifake Turbo: Hold the Setting Button, press a target button, then release.
   LED4 glows white.
3. Nyetel kacepetan: Default yaiku 12Hz (bisa diatur liwat app).
4. Pateni Turbo: Pencet tombol Setelan + tombol target kaping telu (LED4 dipateni).

BUTTON PROGRAMMING

* Back Buttons (M1/M2): Can be mapped to other buttons or macros (max 21 actions per macro).

1. Pemetaan: Hold Setting Button + target back button for 3 seconds. Press the desired button/macro sequence, then press the back button again to save.
2. Clear Mapping: Tahan Tombol Setelan + tombol bali kanggo 3 detik, banjur pencet tombol bali tanpa input.

Produsen: Shenzhen MIKE Morgen Technology Co.,Ltd
alamat: 3/F, Building 5, Block C, Fairview Plaza, Xiangjiaotang Community,Sakata
Pelamar: NYXI Gaming Inc
alamat: 4520 Centennial Bivd NUM1004, Colorado Sorinas CO 80919
Model: NJ10 FCC ID: 2A88F-NJ10

Pranyatan saka Conformity
Model: NJ10

The product conforms to EC standards for radio interference. Here, Shenzhen MIKE Morgen Technology Co.,Ltd. In Shenzhen announces that NJ10 radio equipment conforms to the Directive. EN IEC 62368-1:2020+A11:2020, EN 50663:2017, EN 62479:2010, ETSI EN 301 489-1 V2.23(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09), ETSI EN 300 328 V2.2.2(2019-07).
Teks lengkap Pranyatan Kepatuhan EU bisa ditemokake ing: www.nyxigame.com

Model: NJ10
ID FCC: 2A88F-NJ10

Pranyatan FCC

1. Piranti iki tundhuk karo Part 15 saka Aturan FCC. Operasi tundhuk karo rong syarat ing ngisor iki:
   1. Piranti kasebut bisa uga ora nyebabake gangguan sing mbebayani.
   2. Piranti kasebut kudu nampa gangguan sing ditampa, kalebu sing bisa nyebabake operasi sing ora dikarepake.
2. Owah-owahan utawa modifikasi unit iki sing ora disetujoni kanthi jelas dening pihak sing tanggung jawab kanggo kepatuhan bisa ngilangi wewenang pangguna kanggo ngoperasikake peralatan kasebut.

Cathetan: Peralatan iki wis diuji lan ditemokake tundhuk karo watesan kanggo piranti digital Kelas C, miturut Part 15 Aturan FCC. Watesan kasebut dirancang kanggo menehi pangayoman sing cukup marang gangguan sing mbebayani ing instalasi omah.

This equipment generates, uses, and can radiate radio frequency energy and,if not installed and used in accor dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient utawa pindhah antena panampa
• Tambah jarak antarane peralatan lan panrima.
• Tancepake peralatan menyang soket ing sirkuit sing beda karo sing disambungake karo panrima.
• Hubungi distrbutor utawa teknisi radio/TV sing berpengalaman kanggo njaluk bantuan.

Simbol kasebut tegese produk kasebut ora kudu dibuwang karo sampah rumah tangga nanging digawa menyang titik pengumpulan sing cocog kanggo daur ulang. Miturut peraturan lokal, aja mbuwang produk utawa baterei sing bisa diisi ulang karo sampah rumah tangga normal.

Pembuangan sing cocog kanggo produk bekas lan baterei sing bisa diisi ulang mbantu nyegah dampak negatif ing lingkungan lan kesehatan manungsa.

CEGAHAN

Dokumen / Sumber Daya

NYXI Wisaya 2 Ngalih 2 NYXI TMR Game Controller [pdf] Manual pangguna Wizard 2 Switch 2 NYXI TMR Game Controller, Switch 2 NYXI TMR Game Controller, NYXI TMR Game Controller, Game Controller

Referensi

• Manual pangguna