200W AC Input Variabel Frekuensi
Modul Drive karo Fungsi PFC
VFD-200C-230
VFD-200C-230 AC Input Variabel Frekuensi Drive Modul
 |
 |
| https://www.meanwell.com/Upload/PDF/VFD-E.pdf | https://youtu.be/I8xQxZdWf7A?si=u2BEOM4Fqx1beXny |
Fitur
- 90 ~ 264Vac input, dibangun ing PFC ngedongkrak kanggo 380VDC
- Daya stage, ngalih 3-phase karo sensor ing siji unit kanggo kontrol external (papan kontrol VFD-CB didol sperately)
- Saiki puncak dhuwur nganti 200% lan 5 detik
- Desain tanpa kipas kanggo operasi bisu lan umur dawa
- Proteksi: Short circuit / OCP
- Sensor internal feed metu kanggo kontrol: Sensor saiki - kontrol torsi motor
DC bus voltage sensor - OVP/UVP
Sensor suhu - OTP - -30 ~ + 70 ° C suhu operasi sudhut
- Cocog kanggo drive motor 3-phase
(eg BLDC, Motor induksi, SynRM) - garansi 3 taun
Aplikasi
- HVAC
- Penggemar
- Pompa Air/Air
- Piranti daya
- Conveyor
- lawang otomatis
- peralatan fitness
KODE GTIN
Panelusuran MW: https://www.meanwell.com/serviceGTIN.aspx
Katrangan
VFD-200C-230 minangka modul daya drive frekuensi variabel universal sing nyedhiyakake daya terpadu stage, driver gapura lan sensor VFD dhasar kayata telung phase output saiki lan sensor suhu. Produk iki bisa dileksanakake kanggo solusi drive motor telung phase kanthi koordinasi karo pengontrol drive motor eksternal ing tingkat logika lan analog I / 0. Daya stage input iku siji phase lengkap sawetara saka 90VAC kanggo 264VAC karo fungsi PFC. Output motor 3-phase nganti 240V kanthi kapabilitas saiki puncak 200%. VFD-200C-230 cocok kanggo drive motor telung fase, kayata BLDC;
Motor induksi, lan aplikasi SynRM.
Encoding Model
SPESIFIKASI
| MODEL NO. | VFD-200-230 | ||||
| PWM OUTPUT (Cathetan 1,234) |
VOLTAGE RANGE (UVW) | 380Vmax, line-to-line voltage 0-268V luwes karo modulated PWM, cocok kanggo 3PH 200-240V kelas motor | |||
| SAIKI | Dirating | 0.8A | |||
| Puncak | 1.6A kanggo 5 detik | ||||
| DAYA RATED | 200W | ||||
| EFISIENSI | 92% | ||||
| DC BUS VOLTAGE | 380 ± 5VDC | ||||
| FREKUENSI PWM | 2.5 KHz -15 KHz | ||||
| INPUT | RATE INPUT VOLTAGE | 90 - 264VAC | |||
| JANGKA FREKUENSI INPUT (Hz) | 47 – 63Hz | ||||
| FAKTOR DAYA (Jenis.) | PF>0.99/115VAC, PF>0.93/230VAC ing beban penuh | ||||
| RATED INPUT SAIKI | 3.5A/115VAC 2Al230VAC | ||||
| KAWASAN INRUSH | wiwitan kadhemen 50A / 230VAC | ||||
| KEBOCORAN SAIKI | <2mA/240VAC | ||||
| KONTROL! FUNGSI (Cathetan 5) |
3. FASE PWM KONTROL | Sinyal kontrol PWM menyang driver gerbang kanggo IGBTs. (CN93, PING-13) 33V TTL/CMOS input: Hiqh(>2.7V): IGBT ON; Kurang (<0.4V): IGBT OFF |
|||
| 3-PHASE SENSOR SAIKI | Resistor shunt sisih ngisor 100mO sing dibangun ing fase UVW (CN93, PI144-6) | ||||
| DC BUS VOLTAGE SENSOR | DC BUS voltagoutput sensor (CN93, PINT) 2.5V@DC BUS 380V | ||||
| SENSOR THERMAL | Dibangun ing 10K0 NTC kanggo ngrasakake suhu operasi IGBT. (TSM2A103F34D1R (Thinking Electronic), PI N3 saka CN93) | ||||
| SINYAL KESALAHAN | Sinyal kesalahan inverter (Short circuit/OCP, CN93, PI N7). 3.3V TTL/CMOS output: Normal: Hiqh(>3V); Abnormal: Kurang (<0.5V) |
||||
| DAYA TAMBAHAN | Daya output 15V sing ora terisolasi kanggo papan kontrol eksternal (CN93, PIN 14 nganti PI142) 15V@0.1A; Toleransi +/- 0.5V, Ripple 1Vp-p maks | ||||
| pangayoman | CIRCUIT PENDEK | Jinis pangayoman: Mati o/p voltage, aktif maneh supaya pulih | |||
| LINGKUNGAN | KERJA TEMP. | -30 – +70°C (Waca "Kurva D rearing) | |||
| AMBES KERJA | 20 - 90% RH non-kondensasi | ||||
| SUHU PENYIMPANAN, Asor | -40 – +85°C, 10 – 95% RH non-kondensasi | ||||
| GETERAN | 10 – 500Hz, 2G 10min./Tcycle, wektu kanggo 60min. saben sumbu X, Y, Z | ||||
| KESELAMATAN & EMC | STANDAR KESELAMATAN | CB I EC61800-5-1, TUV/BS EN/EN61800-5-1, EAC TP TC004 disetujoni | |||
| Tahan VOLTAGE | I/P-FG: 2KVAC | ||||
| RESISTANCE Isolasi | I/P-FG: 100M Ohm/500VDC!25°C! 70% RH | ||||
| EMISI EMC | Paramèter | Standar | Test Level I Cathetan | ||
| dilakokake | BS EN/EN IEC61800-3 | Kelas A, C2 | |||
| Radiasi | BS EN/EN IEC61800-3 | Kelas A, C2 | |||
| Saiki Harmonis | BS EN/EN IEC61000-3-2 | KelasA | |||
| Voltage Kelip-kelip | BS EN/EN61000-3-3 | ||||
| KEMALANGAN EMC | BS EN/EN IEC61800-3, lingkungan kapindho | ||||
| Paramèter | Standar | Tingkat Tes / Cathetan | |||
| ESD | BS EN/EN61000-4-2 | Level 3, udhara 8KV; Level 2, 4KV kontak | |||
| Radiasi | BS EN/EN IEC61000-4-3 | Tingkat 3 | |||
| EFT / Paling | BS EN/EN61000-4-4 | Tingkat 3 | |||
| Surge | BS EN/EN61000-4-5 | Level 3, 2KV/Line-Earth ; Level 3, 1KV/Line-Line | |||
| dilakokake | BS EN/EN61000-4.6 | Tingkat 3 | |||
| Medan Magnetik | BS EN/EN61000-4-8 | Tingkat 4 | |||
| Voltage Dips lan Interupsi | BS EN/EN IEC61000-4-11 | >95% dip 0.5 periode, 30% d ip 25 periode, >95% gangguan 250 periode | |||
| Voltage penyimpangan | IEC 61000-2-4 Kelas 2 | ± 10% Un | |||
| Total Harmonic distortion (THD) Individual Harmonic orders | IEC 61000-2-4 Kelas 3 IEC 61000-4-13 Kelas 3 | THD 12% | |||
| Variasi frekuensi | IEC 61000-2-4 | ± 4% | |||
| Tingkat owah-owahan frekuensi | IEC 61000-2-4 | 2%/s | |||
| LAIN | MTBF | 2568.7K jam min.Telcordia SR-332 (Bellcore); 203.8K jam m in.M IL HDBK-217F (25°C) | |||
| UKURAN (L'WII) | 146'55'26mm | ||||
| KEMASAN | 0.31 Kg; 40pcs/13.3kg/0.87CUFT | ||||
| CATETAN | 1.3-phase 220V motor dianjurake. Mangga nimbang saiki dirating nalika digunakake kanggo motor kelas 100-120V. 2. Waca kemampuan saiki puncak ing "V / I Curve". 3. Efficiency dites karo mbukak induktif ing dirating saiki lan daya lengkap. 4.Kabeh paramèter sing ora disebutake khusus diukur ing input 230VAC, beban dirating lan suhu sekitar 25 °C. 5. Mangga deleng "Manual Fungsional" kanggo rincian liyane.  Penafian Tanggung Jawab Produk Kanggo informasi rinci, waca https://www.meanwell.com/serviceDisclaimer.aspx |
||||
Diagram Blokir
Manual Fungsi
- 1.3-phase PWM Control (CN93, PIN8~13)
VFD-200C-230 nyedhiyakake sirkuit enem ngalih kanthi nggunakake 3 setengah jembatan IGBT. IGBTs saben phase kontrol dening
(PIN 8~13). Syarat input kanggo PWM kompatibel karo sinyal TTL lan CMOS 3.3V. Mangga deleng diagram ing ngisor iki. 
WARNING: Sampeyan kudu njaga wektu mati minimal ing antarane saklar ndhuwur lan ngisor saben fase.
- 2.3 (CN93, PIN4~6) Deteksi Arus 3 fase & Proteksi Arus Luwih
Resistor shunt sisih ngisor 100mΩ dipasang ing saben fase VFD-200C-230 kanggo pangukuran saiki lan deteksi sirkuit cendhak. Disaranake kanggo nyepetake sirkuit deteksi eksternal lan ndeteksi sinyal kasebut nganggo OPA. Mangga deleng diagram ing ngisor iki.
Yen output saiki ngluwihi 200% nilai dirating, sirkuit pangayoman internal bakal micu lan mateni driver gapura kanggo pangayoman.
- DC BUS Voltage Deteksi (CN93, PIN1)
VFD-200C-230 dibangun karo DC bus voltage sensor (sensor HV+, PIN 1). Sensor menehi output 2.5V nalika DC bus voltage ing 380V. Disaranake kanggo ndeteksi sinyal kasebut dening OPA. Nalika voltage saka bis DC ngluwihi 420V, sinyal input PWM kudu mati kanggo pangayoman.
- Deteksi Suhu IGBT (CN93, PIN3)
VFD-200C-230 dibangun ing resistor NTC kanggo ndeteksi suhu IGBTs. Pangguna bisa ndeteksi suhu IGBT kanggo pangayoman. (Tipe NTC: TSM2A103F34D1R, Thinking Electronic) Sirkuit deteksi sing disaranake ing ngisor iki. Disaranake kanggo mateni input PWM, yen suhu ndhuwur 95 ℃.
- Sinyal kesalahan
Yen VFD-200C-230 nemokke kondisi overcurrent lan tetep ing negara kanggo wektu overcurrent minimal, sinyal FAULT bakal diaktifake (aktif kurang) kanggo ngabari controller external utawa sirkuit.
- Rekomendasi Rem(CN100,PIN1,3)
VFD-200C-230 dilindhungi undhang-undhang CN100 PIN1,3 sing nyambung menyang HV+,HV- kanggo desain sirkuit rem.
Vol maksimumtage ing DC Bus(HV+) ora luwih saka 420V.
Spesifikasi Mekanik
Pin Terminal Input AC NO. Tugas (TB1)
| Pin No. | Tugas |
| 1 | AC/L |
| 2 | AC/N |
| 3 |  |
Pin Terminal Qutput NO. Tugas (TB100)
| Pin No. | Tugas |
| 1 | U |
| 2 | V |
| 3 | W |
Konektor Bus DC 380V (CN100): JST B3P-VH utawa sing padha
| Pin No. | AWssignment |
| 1 | HV+ |
| 2 | Ora Pin |
| 3 | HV- |
omah kawin: JST VHR utawa padha
Terminal: JST SVH-21T-P1.1 utawa padha karo
CN100 digunakake kanggo nginstal piranti brake regenerative, ngindhari karusakan VFD-200C-230.
Kontrol Pin NO. Tugas (CN93): HRS DF11-14DP-2DS utawa sing padha
| Pin No. | Tugas | Pin No. | Tugas |
| 1 | Sensor HV+ | 8 | PWM_W H |
| 2 | HV- | 9 | PWM_W L |
| 3 | RTH | 10 | PWM_V H |
| 4 | RsH U | 11 | PWM_V L |
| 5 | RsH V | 12 | PWM_U H |
| 6 | RSH_W | 13 | PWM_U L |
| 7 | LUPA | 14 | Vaux _ 15V |
omah kawin: HRS DF11-14DS utawa padha
Terminal HRS DF 11-**SC utawa padha karo
No. Pin Kontrol Tugas (CN93):
| Pin No. | Fungsi | Katrangan |
| 1 | Sensor HV+ | DC BUS voltage output sensor, referensi kanggo pin 2 (HV-) |
| 2 | HV- | DC BUS voltage sensor output lemah |
| 3 | RTH | Sensor suhu |
| 4 | RSH_U | output sensor arus fase U |
| 5 | RSH_V | output sensor arus fase V |
| 6 | RSH_W | output sensor arus fase W |
| 7 | LUPA | Swara deteksi saiki. Normal > 3V, Abnormal <0.5V |
| 8 | PWM_W H | W phase input logika sisih dhuwur, ing> 2.7V; mati <0.4V |
| 9 | PWM_W L | W phase input logika sisih kurang, ing> 2.7V; mati <0.4V |
| 10 | PWM_V H | V phase input logika sisih dhuwur, ing> 2.7V; mati <0.4V |
| 11 | PWM_V L | V phase input logika sisih kurang, ing> 2.7V; mati <0.4V |
| 12 | PWM_U H | U phase input logika sisih dhuwur, ing> 2.7V; mati <0.4V |
| 13 | PWM_U L | U phase input logika sisih kurang, ing> 2.7V; mati <0.4V |
| 14 | Vaux_15V | Tambahan voltage output referensi 15V kanggo pint (HV-). Arus beban maksimum yaiku 0.1A |
Aplikasi
Aplikasi example: aplikasi drive BLDC
- Tokoh nuduhake sistem drive BLDC diatur karo VFD-200C-230.
- Pangembang bisa ngontrol sinyal PWM saka 6-switch kanthi nggunakake SPWM utawa SVPWM, etc. kanggo vol 3-phasetagmodulasi, lan mbangun basis metode kontrol ing sensor shunt saiki ing 3-phase low-side switch (RSH_U/V/W) lan DC BUS voltage sensor (HV-+ sensor) kang diwenehake dening VFD-200C-230.
- Pangembang bisa milih sensor posisi BLDC sing cocog kayata encoder utawa sensor Hall-effect sing cocog karo aplikasi kasebut.
- Disaranake nginstal sirkuit / piranti rem ing HV-+/HV- pin (DC BUS,CN100) supaya DC BUS OVP nalika BLDC decelerating.
- Disaranake kanggo mateni input PWM utawa nyambung menyang piranti resistor brake kanggo safety nalika DC Bus voltagluwih dhuwur tinimbang 420V.
- Yen VFD-200C-230 ditrapake kanthi kontrol sing ora cocog, kayata nyepetake cepet banget utawa kontrol arus sing ora apik, bisa uga nyebabake kahanan fault VFD-200C-230 kanggo mateni vol output.tage (low-level ing FAULT pin).
Instalasi
- Dioperasikake karo piring aluminium tambahan
Supaya bisa ketemu * Kurva Derating "lan "Karakteristik Statis * seri VFD kudu dipasang ing piring aluminium (utawa lemari ukuran sing padha) ing sisih ngisor. Ukuran disaranake piring aluminium s ditampilake ing ngisor iki. Lan kanggo ngoptimalake kinerja termal, piring aluminium kudu duwe permukaan sing rata lan lancar (utawa dilapisi pelumas termal), lan seri VFD kudu dipasang kanthi kuat ing tengah piring aluminium.
- Kanthi udhara paksa 15CFM
Dhaptar Aksesoris
Yen sampeyan duwe syarat kontrol aplikasi tartamtu, hubungi MEAN WELL kanggo rincian liyane.
Papan kontrol motor (Papan kontrol motor lan modul drive VFD kudu dipesen kanthi kapisah)
| Urutan MW No. | Papan kontrol | Saran Majelis | Jumlah |
| VFD-CB |  |
 |
1 |
Aplikasi Khas
- Modul Frekuensi Variabel (seri VFD)
- Papan kontrol Drive Frekuensi Variabel (Dirancang dening Panganggo utawa Soluton sing Disedhiyakake dening MEAN WELL)
- Motor Pompa 3 Fase
- Baterei
- Modul Frekuensi Variabel (seri VFD)
- Papan kontrol Drive Frekuensi Variabel (Dirancang dening Panganggo utawa Soluton sing Disedhiyakake dening MEAN WELL)
- 3-phase Wheel Motor kanggo AGV Aplikasi
- Modul Frekuensi Variabel (seri VFD)
- Papan kontrol Drive Frekuensi Variabel (Dirancang dening Panganggo utawa Soluton sing Disedhiyakake dening MEAN WELL)
- 3-phase Fan Motor
- HEPA kanggo Nyaring Udara
PAKET DEMO
Hubungi MEAN WELL kanggo rincian liyane.
VFD Demo Kit Fungsi Utama lan Fitur.
- Dibangun ing VFD-350P-230 lan motor 230V.
- Kontrol motor wiwitan / mandheg / maju / mundur / kacepetan.
- Motor start/stop/maju/mundur indikator kanan.
- Tampilan kacepetan motor (RDM).
- Papan kontrol bisa diganti.
- Ndhukung sambungan motor eksternal.
Manual Instalasi
Mangga deleng: http://www.meanwell.com/manual.html
Dokumen / Sumber Daya
 |
MEAN WELL VFD-200C-230 AC Modul Penggerak Frekuensi Variabel Input kanthi Fungsi PFC [pdf] Manual Pamilik VFD-200C-230, VFD-200C-230-20240812, VFD-200C-230 Modul Penggerak Frekuensi Variabel Input AC kanthi Fungsi PFC, VFD-200C-230, Modul Penggerak Frekuensi Variabel Input AC kanthi Fungsi PFC, Modul Penggerak Frekuensi Variabel Fungsi PFC, Modul Drive Frekuensi karo Fungsi PFC, Modul Drive karo Fungsi PFC, Modul karo Fungsi PFC, karo Fungsi PFC, Fungsi PFC, Fungsi |