M5StickC Plus2 Pandhuan Operasi
Firmware Pabrik
Nalika piranti nemokke masalah operasional, sampeyan bisa nyoba maneh sumunar perangkat kukuh pabrik kanggo mriksa apa ana malfunction hardware. Deleng tutorial ing ngisor iki. Gunakake alat sumunar perangkat kukuh M5Burner kanggo kerlip perangkat kukuh pabrik menyang piranti.
FAQ
Q1: Napa layar ireng M5StickC Plus2ku / ora bisa boot?
Solusi: M5Burner Burn resmi Pabrik Firmware "Demo Pangguna M5StickCPlus2"
Q2: Napa wektu kerja mung 3 jam? Napa 100% ngisi ing 1 menit, copot kabel pangisi daya bakal mati?
Solusi: "Bruce kanggo Stack plus2"Iki perangkat kukuh ora resmi. Sumunar perangkat kukuh ora resmi bisa mbatalake babar pisan, nimbulaké kahanan kang ora tetep, lan mbabarake piranti kanggo risiko keamanan. Terusake kanthi ati-ati.
Mangga diobong maneh firmware resmi.
Persiapan
- Deleng tutorial M5Burner kanggo ngrampungake download alat flashing perangkat kukuh, banjur deleng gambar ing ngisor iki kanggo ngundhuh perangkat kukuh sing cocog.
Link download: https://docs.m5stack.com/en/uiflow/m5burner/intro
Instalasi Driver USB
Tip Instalasi Driver
Klik link ing ngisor iki kanggo ndownload driver sing cocog karo sistem operasi sampeyan. Paket driver kanggo CP34X (kanggo versi CH9102) bisa diundhuh lan diinstal kanthi milih paket instalasi sing cocog karo sistem operasi sampeyan. Yen sampeyan nemoni masalah karo download program (kayata wektu entek utawa kesalahan "Gagal nulis menyang target RAM"), coba instal maneh driver piranti.
CH9102_VCP_SER_Windows
https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102_VCP_SER_Windows.exe
CH9102_VCP_SER_MacOS v1.7
https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102_VCP_MacOS_v1.7.zip
Pilihan Port ing MacOS
Ing MacOS, bisa uga ana rong port sing kasedhiya. Nalika nggunakake, pilih port sing jenenge wchmodem.
Pilihan Port
Sambungake piranti menyang komputer liwat kabel USB. Sawise instalasi driver rampung, sampeyan bisa milih port piranti sing cocog ing M5Burner.
Ngobong
Klik "Burn" kanggo miwiti proses sumunar.
StickC-Plus2
SKU: K016-P2
Katrangan
StickC-Plus2 minangka versi iteratif saka Stick C-Plus. Iki didhukung dening chip ESP32-PICO-V3-02, nyedhiyakake konektivitas Wi-Fi. Ing awak kompak, nggabungake macem-macem sumber daya hardware, kalebu pemancar IR, RTC, mikropon, LED, IMU, tombol, buzzer, lan liya-liyane. Iki nampilake tampilan TFT 1.14-inch sing didorong dening ST7789V2 kanthi resolusi 135 x 240.
Kapasitas baterei wis tambah nganti 200 mAh, lan antarmuka kompatibel karo modul seri HAT lan Unit.
Alat pangembangan sing ramping lan kompak iki bisa nyebabake kreatifitas tanpa wates. StickC-Plus2 mbantu sampeyan nggawe prototipe produk IoT kanthi cepet lan nyederhanakake kabeh proses pangembangan. Malah pamula sing anyar ing program bisa nggawe aplikasi menarik lan aplikasi ing urip nyata.
Tutorial
UIFlow
Tutorial iki bakal ngenalake carane ngontrol piranti StickC-Plus2 liwat platform pemrograman grafis UIFlow.
UiFlow2
Tutorial iki bakal ngenalake carane ngontrol piranti StickC-Plus2 liwat platform pemrograman grafis UiFlow2.
Arduino IDE
Tutorial iki bakal ngenalake carane program lan ngontrol piranti StickC-Plus2 nggunakake Arduino IDE.
Cathetan
Port Ora Dikenali
Nalika nggunakake kabel C-to-C, yen port ora bisa dikenali, tindakake prosedur daya ing ngisor iki:
copot StickC-Plus2, mateni (pencet dawa tombol daya nganti LED ijo murup), banjur sambungake maneh kabel USB kanggo urip.
Fitur
- Adhedhasar ESP32-PICO-V3-02 kanthi dhukungan Wi-Fi
- Dibangun ing 3-sumbu akselerometer lan 3-sumbu giroskop
- Integrated IR emitor
- Dibangun ing RTC
- Mikropon terpadu
- Tombol pangguna, LCD 1.14 inci, tombol daya/reset
- 200 mAh baterei Li-ion
- Konektor ekspansi
- Buzzer pasif terpadu
- Bisa dipakai & dipasang
- Platform Pangembangan
- UiFlow1
- UiFlow2
- Arduino IDE
- ESP-IDF
- PlatformIO
kalebu
- 1 x StickC-Plus2
Aplikasi
- Piranti sing bisa dipakai
- pengontrol IoT
- Pendidikan STEM
- proyek DIY
- Piranti Smart-home
Spesifikasi
| Spesifikasi | Paramèter |
| SoC | ESP32-PICO-V3-02 240 MHz dual-core, Wi-Fi, 2 MB PSRAM, 8 MB Flash |
| Vol inputtage | 5 V @ 500 mA |
| Antarmuka | Tipe-C x 1, GROVE (I2C + I/O + UART) x 1 |
| Layar LCD | 1.14 inci, 135 x 240 Warna LCD TFT, ST7789V2 |
| Mikropon | SPM1423 |
| Tombol | Tombol pangguna x 3 |
| LED | LED hijau x 1 (non-programmable, indikator turu) LED abang x 1 (pin kontrol saham G19 karo emitor IR) |
| RTC | BM8563 |
| Buzzer | Buzzer pasif ing papan |
| IMU | MPU6886 |
| Antena | 2.4 G 3D antena |
| Pin njaba | G0, G25/G26, G36, G32, G33 |
| Baterei | 200 mAh @ 3.7 V, nang |
| Suhu Operasi | 0 ~ 40 °C |
| Enclosure | Plastik (PC) |
| Ukuran produk | 48.0 x 24.0 x 13.5 mm |
| Bobot produk | 16.7 g |
| Ukuran Paket | 104.4 x 65.0 x 18.0 mm |
| Bobot reged | 26.3 g |
Instruksi Operasi
Daya On/Off
Power-on: Pencet "BUTTON C" luwih saka 2 detik, utawa tangi liwat sinyal IRQ RTC. Sawise sinyal tangi wis micu, program kudu nyetel PIN HOLD (G4) kanggo dhuwur (1) supaya daya ing, yen piranti bakal mati maneh.
Mateni daya: Tanpa daya USB eksternal, penet "BUTTON C" luwih saka 6 detik, utawa setel HOLD (GPIO4)=0 ing program kanggo mateni. Nalika USB disambungake, menet "BUTTON C" luwih saka 6 detik bakal mateni layar lan mlebu mode ngaso (ora mati lengkap).
Matematika
Peta Pin
Red LED & IR Emitter | Tombol A | Tombol B | Buzzer
| ESP32-PICO-V3-02 | GPIO19 | GPIO37 | GPIO39 | GPIO35 | GPIO2 |
| IR Emitter & Red LED | IR emitor & Red LED pin | ||||
| Tombol A | Tombol A | ||||
| Tombol B | Tombol B | ||||
| Tombol C | Tombol C | ||||
| Buzzer Pasif | Buzzer |
Tampilan TFT warna
IC driver: ST7789V2
Résolusi: 135 x 240
| ESP32-PICO-V3-02 | G15 | G13 | G14 | G12 | G5 | G27 |
| Tampilan TFT | TFT_MOSI | TFT_CLK | TFT_DC | TFT_RST | TFT_CS | TFT_BL |
Mikrofon MIC (SPM1423)
| ESP32-PICO-V3-02 | G0 | G34 |
| MIC SPM1423 | CLK | DATA |
6-Axis IMU (MPU6886) & RTC BM8563
| ESP32-PICO-V3-02 | G22 | G21 | G19 |
| IMU MPU6886 | SCL | SDA | |
| BM8563 | SCL | SDA | |
| IR Emitter | TX | ||
| LED abang | TX |
HY2.0-4P
| HY2.0-4P | ireng | abang | kuning | Putih |
| PORT.CUSTOM | GND | 5V | G32 | G33 |
Ukuran Model
Lembar data
ESP32-PICO-V3-02
ST7789V2
BM8563
MPU6886
SPM1423
Piranti lunak
Arduino
StickC-Plus2 Arduino Quick Start
Pustaka StickC-Plus2
StickC-Plus2 Factory Test Firmware
UiFlow1
StickC-Plus2 UiFlow1 Miwiti Cepet
UiFlow2
StickC-Plus2 UiFlow2 Miwiti Cepet
PlatformIO
[env:m5stack-stickc-plus2] platform = espressif32@6.7.0
papan = m5stick-c
kerangka = arduino
upload_speed = 1500000
kacepetan_monitor = 115200
build_flags =
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-masalah
-DCORE_DEBUG_LEVEL=5
lib_deps =
M5Unified=https://github.com/m5stack/M5Unified
USB Driver
Klik link ing ngisor iki kanggo ndownload driver sing cocog karo sistem operasi sampeyan. Paket kasebut ngemot driver CP34X (kanggo CH9102). Sawise ngekstrak arsip, jalanake installer sing cocog karo kedalaman bit OS sampeyan.
Yen sampeyan nemoni masalah kayata wektu entek utawa "Gagal nulis menyang target RAM" nalika ngundhuh, coba instal maneh driver.
| Jeneng Driver | Didhukung Chip | Ngundhuh |
| CH9102_VCP_SER_Windows | CH9102 | Ngundhuh |
| CH9102_VCP_SER_MacOS v1.7 | CH9102 | Ngundhuh |
Pilihan Port macOS
Loro port serial bisa uga katon ing macOS. Mangga pilih port jenenge wchmodem.
Loader gampang
Easy Loader minangka program flasher entheng sing dilengkapi perangkat kukuh demonstrasi. Kanthi tindakake sawetara langkah prasaja, sampeyan bisa kerlip menyang controller kanggo verifikasi fungsi cepet.
| Loader gampang | Ngundhuh | Cathetan |
| Tes Pabrik kanggo Windows | download | / |
Liyane
StickC-Plus2 Mulihake Pandhuan Firmware Pabrik
Video
Pambuka Fitur StickC-Plus2
StackC Plus2 视频.mp4
Ganti Versi
| Tanggal Rilis | Ganti Katrangan | Cathetan |
| / | release pisanan | / |
| 2021-12 | Ditambahake fungsi turu lan tangi, versi dianyari dadi v1.1 | / |
| 2023-12 | Dibusak PMIC AXP192, MCU diganti saka ESP32-PICO-D4 dadi ESP32-PICO-V3-02, cara power-on/off sing beda, versi v2 | / |
Perbandingan Produk
Bedane Hardware
| produk jeneng |
SoC | Manajemen daya | Kapasitas baterei | Memori | Chip USB-UART | warna |
| Stik C-Plus | ESP32-PICO-D4 | AXP192 | 120 mAh | 520 KB SRAM + 4 MB Flash | CH522 | Abang - oranye |
| StickC-Plus2 | ESP32-PICO-V3-02 | / | 200 mAh | 2 MB PSRAM + 8 MB Flash | CH9102 | Oranye |
Bedane Pin
| Jeneng produk | IR | LED | TFT | TOMBOL A | TOMBOL B | TOMBOL C (WAKE) |
TAHAN | Baterei Voltage Ndeteksi |
| M5STICKC PLUS | G9 | G10 | MOSI (G15) CLK (G13) DC (G23) RST (G18) CS (G5) |
G37 | G39 | Biasa tombol |
/ | Liwat AXP192 |
| M5STICKC PLUS2 | G19 | G19 | MOSI (G15) CLK (G13) DC (G14) RST (G12) CS (G5) |
G37 | G39 | G35 | G4 | G38 |
Power On / Off Bedane
| produk jeneng | Power On | Power Off |
| Stik C-Plus2 | Pencet "BUTTON C" luwih saka 2 detik, utawa tangi liwat RTC IRQ. Sawise tangi, setel HOLD (G4)=1 ing program supaya tetep daya urip, yen ora piranti bakal mati maneh. |
Tanpa daya USB, pencet "BUTTON C" luwih saka 6 detik, utawa setel HOLD (GPIO4)=0 ing program kanggo mateni. Kanthi USB disambungake, menet "BUTTON C" kanggo luwih saka 6 s bakal mateni layar lan ngetik turu, nanging ora daya lengkap-. |
Amarga StickC-Plus2 mbusak PMIC AXP192, cara power-on/off beda karo versi sadurunge. Kaya sing kasebut ing wiwitan dokumen iki, operasi kasebut meh padha, nanging perpustakaan sing didhukung bakal beda-beda. Kekuwatan sinyal Wi-Fi lan IR wis apik dibandhingake karo model sadurunge.
Dokumen / Sumber Daya
 |
M5STACK ESP32-PICO-V3-02 Modul Pangembangan IoT [pdf] Pandhuan pangguna ESP32-PICO-V3-02 Modul Pengembangan IoT, ESP32-PICO-V3-02, Modul Pengembangan IoT, Modul Pengembangan, Modul |