Z-Flash OBD Plugin Flasher Ngalih Modul

Pambuka
The Z-Flash OBD Plugin Flasher Switch Module is a plug-and-play device designed for select vehicles (Ford, Dodge/Jeep/Ram, GM, etc.) that connects via the OBD-II port. It allows the user to flash various factory exterior lights (headlights, fog lights, turn signals, reverse lights, etc.) with customizable flash patterns, without modifying the vehicle’s wiring or ECU. A switch and hardwire cable are included so you can trigger the module manually or integrate it into your existing controls.

Spesifikasi

Panganggone

• Instalasi: Plug the module into the OBD-II port in your vehicle. Mount the switch (often on the dashboard or steering column area) using the included strip. The hardwire option allows you to integrate with other switches or control circuits.
• Operasi: Use the switch to turn the module on or off. A short press might toggle power; a longer press may cycle through the flash patterns.
• Lampu Kendaraan: Once activated, the module commands the vehicle to flash the selected lights per the chosen pattern. Lights that are overridden (brakes, turn signals) usually retain priority—this avoids confusion or interference with safety features.
• Kustomisasi: Use the supplied software to fine-tune flash patterns, enable or disable particular lights being flashed, or adjust pattern behaviour.

JAMINAN
This warranty protects the product(s) specified to be free from defects in material and workmanship for 1 (one) year. During the warranty period, we will, at our sole discretion, repair or replace the product(s). This limited warranty does not cover travel expenses or labour charges for the removal and reinstallation of the product, or any other charges alike. We are not responsible for incidental damages, including but not limited to: loss of time, loss of work, inconvenience, loss and/or damage to personal property, and shipping expenses. We are in no way responsible for any loss or any indirect or consequential damages resulting from any such defect in material and/or workmanship, whether it’s due to negligence, incorrect installation, manufacturer’s mistake. It is the sole responsibility of the party initiating a warranty claim to pay shipping charges associated with returning a product.

• Yen sampeyan ora ngerti apa sing sampeyan lakoni, aja nyoba.
• Kita menehi saran instalasi profesional kanggo kabeh produk.
• Kejut listrik bisa nyebabake ciloko utawa pati. Gunakake alat lan proteksi sing tepat nalika nginstal. Instalasi profesional banget dianjurake.
• Please check forthe the correct installation method before powering on. An electrical fire can occur.
• Aja mbukak kabel ing dalan airbag utawa piranti safety liyane.

INSTALASI MODUL OBD-II

1. Connect the module to the vehicle’s OBD-II port. The OBD-II port is located under the dashboard on the driver’s side.
2. Miwiti kendaraan sampeyan.
3. The module will begin to boot, and the LED will flash for 5 seconds.
4. When the module is ready for us, the green LED will flash for 5 seconds and then turn off.
5. If you need to disconnect the module and plug it back in, you will need to follow the boot sequence again.

2018-2021 Jeep Grand Cherokee
2018-2024 Durango

Modul gateway keamanan dumunung ing sisih penumpang ing ngisor kothak sarung tangan.

1. Remove the push pins holding the passenger side carpet silencer panel in place.
2. Remove both connectors plugged into the security gateway module.
3. Copot loro plug ing modul keamanan lan sambungake maneh menyang modul bypass.
   Sampeyan kudu nyopot Modul Bypass Z-Flash lan sambungake maneh Modul Keamanan Chrysler nalika nglayani kendaraan kanggo mesthekake yen alat bakul bakal bisa digunakake.

• 2019-2024 Ram 1500
• 2018-2024 Pangisi daya
• 2018-2024 Wrangler JL
• 2018-2023 300

1. Remove the panel to access under the dash.
2. You can remove the 3 screws and remove the entire module. Or reach your hand behind and remove the plugs from the module.
3. Copot loro plug ing modul keamanan lan sambungake maneh menyang modul bypass.

Sampeyan kudu nyopot Modul Bypass Z-Flash lan sambungake maneh Modul Keamanan Chrysler nalika nglayani kendaraan kanggo mesthekake yen alat bakul bakal bisa digunakake.

• 2018 Ram 1500 Kab
• 2019-2024 Ram 1500 Classic
• 2018-2024 Ram 2500-5500

This harness prevents you from having to access the security gateway and install a Gateway Bypass Module on the 2018 Ram 1500, 2019-2020 Ram 1500 Classic and 2018-2020 2500-5500 Rams. Once your T-Harness is installed, you will not need a Z-Flash Gateway Bypass Module. The T-Harness does not need to be removed when getting the vehicle serviced. The T-Harness also acts as a splitter and leaves room for an additional OBD-II device to be connected to the vehicle.

1. Using the two clips on the side of the OBD-II port, squeeze and push the port forward to push it out of the holder.
2. Connect the Z-Flash to the T-Harness OBD-II port where the green and white plugs are.
3. Connect the female end of the T-Harness into the vehicle’s OBD-II port that you removed in step 1.
4. Connect the white plug from the T-Harness into the green Star Board located up and under the driver’s side dashboard near the OBD-II port. If you have multiple green Star Boards, then you will need to use the one with the white plugs and yellow wires. You can use an..y
5. The last OBD-II plug on the T-Harness can be put back into the vehicle’s OBD-II holder, where you removed the OBD-II port in step 1.

Pandhuan Referensi Cepet

Kanggo mbusak T-Harness saka Papan Bintang: Press the tab inside the white plug from the T-Harness and carefully pull it t of the green Star Board. You may need to use a small screwdriver to press the tab or pull the plug out of the Star Board.

2018-2023 Dodge Challenger
The Z-Flash T-Harness will work with the 2018-2020 Dodge Challenger. This harness prevents you from having to access the security gateway and install a Gateway Bypass Module. Once your T-Harness is installed, you will not need a Z-Flash Gateway Bypass Module. The T-Harness does not need to be removed when getting the vehicle serviced. The T-Harness also acts as a splitter and leaves room for an additional OBD-II device to be connected to the vehicle.

1. Using the two clips on the side of the OBD-II port, squeeze and push the port forward to push it out of the holder.
2. Connect the Z-Flash to the T- T-T-Harness OBD-II port where the white plug exits from.
3. Connect the female end of the T-Harness into the vehicle’s OBD-II port that you removed in step 1.
4. Connect the white plug from the T-Harness to the green Star Board. For the 2018-2020  Dodge Challengers, the Star Board is located on the passenger’s side to the right of the glove box. If you have multiple green Star Boards,s then you will need to use the one with the white plugs and yellow wires. You can use any open port.
5. The last OBD-II plug on the T-harness can  be put back into the vehicle’s OBD-II holder,r where you removed the OBD-II port from in step 1

Pandhuan Referensi Cepet

OPERASI

Aktifake:
The module requires no external switches and can be activated with the high beam stalk.

1. Pull the high beam stalk back for 5 seconds to activate it. You’ll know it’s turned on when the high beam indicator is active on the dashboard. If your vehicle is equipped with a dashboard screen, it will display the Z-Flash pattern that you are currently using in the place where your radio normally displays.
2. To turn it off, pull the high beam stalk for two seconds.

Pattern Changing:

Z-Flash Programming Utility

1. To change the pattern, press both the left arrow andthe cancel button simultaneously. (For 2011-2014 Chargers, use the back button and cancel button simultaneously)
2. The flash pattern will be displayed on the dashboard if your dashboard screen is set to view radio kasebut.

How to Change Pattern Speed:

1. To increase the speed of the pattern, push the high beam stalk forward and lift (like signalling you are turning right). Do this 2 more times to reach the maximum speed.
2. To decrease the speed of the pattern, push the high beam stalk forward and push down (like signalling you are turning left). Do this 2 more times to reach the slowest speed.

Quick Start Activation:

1. When entering the vehicle, le pull the high beam stalk back while starting the vehicle.
2. The lights will immediately turn on when the vehicle starts

Fob Kunci:

Use the key fob to turn your lights on by pressing:

1. Mbukak kunci
2. Mbukak kunci
3. Kunci
4. Mbukak kunci

While the module is active, you may use the unlbutton on the key fob to change to the next available pattern.

Safety & Best Practices

• Kepatuhan Hukum: Flashing lights may be tightly regulated in many jurisdictions. What’s allowed for emergency vehicles may not be legal for civilian or non-emergency use. Always check local laws regarding the use of flashing or strobing lights.
• Ngindhari Overload: Since the module uses factory lighting circuits, ensure the bulbs and circuits are rated and healthy. Weak or faulty bulbs or connections can dazzle or distract, or cause electrical issues.
• Install in Dry & Secure Location: The module is usually meant to be inside the cabin (safe from water, dust, etc.). Don’t install it where moisture or heat could damage it. Some versions are not waterproof.
• Ensure Wiring is Secure: Switch wiring and the module’s wiring should be safely routed to avoid contact with moving parts, sharp edges, or surfaces that heat up. Use mounting strips and secure the parts to avoid vibration damage.
• Prioritise Safety Signals: The module is designed so that brake signals and turn signals (important safety signals) override flashing patterns. Do not disable this override. Using flashing modes should not compromise visibility for other drivers.

Pitakonan

Kepiye cara kerjane?

Using diagnostic signals, the module tells the vehicle to activate the respective lights. The module does not rewrite computer code or affect the vehicle. The codes are the same that the dealer could use to diagnose your vehicle.

Apa iki bakal ngobong komputerku?

Modul ora sijine metu sembarang voltage and will not burn up the computer. It's much like plugging a USB stick into your PC.

Apa lampu remku isih bisa digunakake?

Sinyal rem lan giliran sampeyan bakal ngilangi pola kelip-kelip. Yen modul aktif lan sampeyan mencet rem utawa nggunakake sinyal giliran, fungsi kasebut bakal timpa. Iki ora bisa dipateni amarga iki minangka fitur safety sing penting.

Will this burn umyny bulbs?

Like any headlight/taillight flasher,r it will burn out your bulbs faster than normal. Aftermarket HIDs will burn up very quickly because the ballasts are not intended to flash.

My bulb is not flashing or very dim?

Unlike LEDs, Halogen bulbs require a charge-up and cool-down time. Because of this, it is not possible to flash them as fast as LED bulbs. Try using a custom pattern to slow the flash rate down

My bulb is not flashing or very dim?

Unlike LEDs, Halogen bulbs require a charge-up and cool-down time. Because of this, it is not possible to flash them as fast as LED bulbs. Try using a custom pattern to slow the flash rate down

Is the module traceable?

Once removed, the module does not leave any trace of being installed. For the 2018-2019 model year, rs be sure to remove the gateway module and reconnect the vehicle's security module before attempting to connect an OBD-II scanner or before having the vehicle serviced. Leaving the gateway module installed will prevent an OBD-II scanner from operating properly.

Does the Z-FIash work with aftern-tarket bulbs?

Yes, but some low quality aftermarket HIDs and LEDs will burn up very quickly because the ballasts are not intended to flash.

Will my trailer lights flash?

Trailer lights should only flash if they're using an aftermarket trailer wiring harness. If it's the factory tow kit, in most cases it wouldnt flash as those are commanded separately.

Will my plow lights flash?

Yes, most plow lights will flash provided they are wired to your vehicle's headlights.

Dokumen / Sumber Daya

Lampu kilat Z-Flash OBD Plugin Flasher Ngalih Modul [pdf] Manual pangguna DAGslZkyTPw, BADv5RntTZY, Z-Flash OBD Plugin Flasher Switch Module, Plugin Flasher Switch Module, Flasher Switch Module, Switch Module

Referensi

• Manual pangguna