Euchips DMX512 4CH Konstan Voltaglan dekoder RDM
Spesifikasi
- Jeneng produk: 24 Channel Konstan Voltage DMX512 & RDM Decoder
- Saluran: 24
- Vol inputtage: 12-24VDC
- Input Saiki: 60.5A
- Output Voltage: 24 x (12-24)VDC
- Output Saiki: 24CH, 3A/CH Total Max. 60A
- Daya Output: 24 x (36-72)W
- Tipe Output: Konstan voltage
- Garansi: 5 taun
Fitur
- Complies with the DMX512 standard protocols.
- Tampilan angka digital, atur alamat wiwitan decode DMX kanthi tombol.
- RDM function allows intercommunication between DMX master and decoder, e.g., DMX decoder address can be set by DMX master console.
- 16bit (65536 levels) / 8bit (256 levels) grey level selectable.
- PWM frequency 500/1000/2000/4000/8000/16000/32000Hz selectable.
- Kurva peredupan logaritma utawa linear bisa dipilih.
- Stand-alone 24-channel RGB mode and 24-channel dimmer mode selectable, controlled by buttons with built-in programs, instead of DMX signal.
Parameter teknis
| Input lan Output | Lingkungan | Safety lan EMC |
|---|---|---|
| Input voltage: 12-24VDC | Suhu operasi: Ta: -30°C ~ +55°C | EMC standard: EN IEC 55015/EN IEC 61547 |
| Input saiki: 60.5A | Suhu kasus (Maks.): Tc: +85°C | Safety standard: EN 61347-1/-2, EN 62493 |
| Output voltage: 24 x (12-24)VDC | Garansi: 5 taun | Certification: CE RoHS FCC |
| Output current: 24CH, 3A/CH Total Max. 60A | Proteksi: Polaritas Malik | Package: Size: L165 x W98 x H72mm, Gross weight: 0.356kg |
| Daya output: 24 x (36-72)W | ||
| Tipe Output: Vol konstantage |
Struktur Mekanik lan Instalasi
Wiring Diagram
Cathetan
- Sinyal DMX amplier is needed if more than 32 decoders are connected, or use overlong signal line, signal amplication should not be more than 5 times continuously.
- Yen efek mundur amarga garis sinyal luwih dawa utawa kualitas garis sing ora apik, coba sambungake resistor terminal 0.25W 90-120Ω ing pungkasan saben baris.
Operasi
Setelan parameter sistem
- Long press M and ◀ key for 2s, prepare for setup system parameter: decode mode, grey level, output PWM frequence, output brightness curve, default output level, automatic blank screen.short press M key to switch six item.
- Decode mode: short press ◀ key to switch 1-channel decode(”d-01″), 3-channeldecode(”d-03″) , 6- channel decode(”d-06″) or 24-channel decode(”d-24″).When set as 1 channel decode,
and 24 channel output the same brightness of this DMX address. - Grey level: short press ◀ or ▶ key to switch 8bit(”b-08″) or 16 bit(”b-16″). choose 16 bit if the DMX master support 16 bit.
- Output PWM frequence: short press ◀ or ▶ key to switch 500Hz(”F05″), 1000Hz(”F010″), 2000Hz(”F020″), 4000Hz(”F040″), 8000Hz(”F080″), 16000Hz(”F160“) or 32000Hz(”F320“).
- Higher PWM frequency, will cause lower output current, higher power noise, but more suitable for camera(No fickers for video).
- When setting the PWM frequency > 8000Hz, the output current per channel needs to be reduced (24x2A@12-24V at 16000H or 32000Hz).
- Output brightness curve: short press ◀ or ▶ key to switch linear curve(”C–L“) or logarithmic curve(”C–E”).
- Default output level: set output level when no DMX input signal. short press ◀ or ▶ key to switch maintain DMX output(”d- -”) or output default level (”d00″ to “dFF”, 0-100%), long press ◀ or ▶ key to change output default level.
- Automatic blank screen: short press ◀ or ▶ key to switch enable (”bon”) or disable(”boFF”)automatic blank screen.
- Pencet dawa tombol M kanggo 2 detik utawa wektu entek 10 detik, metu saka setelan parameter sistem.
Cathetan: In addition to manual button operation settings, the above system parameters can also be set by RDM function.
Mode DMX
- Pencet cendhak tombol M, nalika nampilake A001 ~ A512, ketik mode DMX.
- Pencet tombol ◀ utawa ▶ kanggo ngganti alamat wiwitan decode DMX (001~512), penet dawa kanggo nyetel cepet.
- Yen ana input sinyal DMX, bakal mlebu mode DMX kanthi otomatis.
- DMX Dimming: Each D24 DMX decoder occupy 24 DMX address when connecting the DMX console.
Kanggo example, alamat wiwitan default yaiku 1, hubungane sing cocog ing wangun:
| Konsol DMX | DMX Decoder Output |
| CH1 0-255 | CH1 PWM 0-100% (LED 1#R) |
| CH2 0-255 | CH2 PWM 0-100% (LED 1#G) |
| CH3 0-255 | CH3 PWM 0-100% (LED 1#B) |
| CH24 0-255 | CH24 PWM 0-100% (LED 8#B) |
Mode RGB mandiri
- Pencet cendhak tombol M, nalika ditampilake P–1~P–4, ketik mode RGB mandiri.
- Press ◀ or ▶ key to change dynamic mode number(P–1~P–4).
- Saben mode bisa nyetel kacepetan lan padhange.
- Pencet dawa tombol M kanggo 2 detik, nyiapake kacepetan mode persiyapan, padhang.
- Pencet cendhak tombol M kanggo ngoper rong item.
- Pencet tombol ◀ utawa ▶ kanggo nyetel nilai saben item.
- Mode speed: 1-10 level speed(SP-1, SP-9, SP-F).
- Mode brightness: 1-10 level brightness(br-1, br-9, br-F).
- Pencet dawa tombol M kanggo 2 detik, utawa wektu entek 10 detik, metu setelan.
- Ketik mode RGB sing mandheg mung nalika sinyal DMX pedhot utawa ilang.
dhaftar mode owah-owahan RGB
| Ora. | jeneng |
| P–1 | Putih maju mlumpat ngoyak |
| P–2 | White forward smooth float |
| P–3 | Red, yellow, green, cyan ,blue, purple forward jump chase |
| P–4 | Red, yellow, green ,cyan, blue ,purple forward smooth float |
Mode dimmer mandiri
- Pencet cendhak tombol M, nalika ditampilake L–1~L–8, mlebu mode dimmer mandiri.
- Press ◀ or ▶ key to change dimmer mode number(L–1~L–8).
- Saben mode dimmer bisa nyetel padhange saluran kanthi mandiri.
- Long press M key for 2s, prepare for setup 24 channels brightness.
- Short press M key to switch 24 channels(0100~01FF, 0200~02FF, 0300~03FF, … , 2400~24FF). Press ◀ or ▶ key to setup brightness value of each channel.
- Pencet dawa tombol M kanggo 2 detik, utawa wektu entek 10 detik, metu setelan.
- Ketik mode dimmer dewekan mung nalika sinyal DMX pedhot utawa ilang.
Mulihake parameter standar pabrik
- Pencet dawa tombol ◀ lan ▶ kanggo 2 detik, mulihake parameter standar pabrik, nampilake "RES".
- Parameter standar pabrik: mode decode DMX, alamat wiwitan decode DMX yaiku 1, decode saluran 24, level abu-abu 8 bit, output frekuensi PWM 2000Hz, kurva padhang logaritmik, level output 100% nalika ora ana input DMX, nomer mode RGB yaiku 1, nomer mode dimmer yaiku 1, mateni layar kosong otomatis.
Setelan Curve Dimming
Analisis Malfungsi & Ngatasi Masalah
| Malfunctions | Nimbulaké | Ngatasi masalah |
|---|---|---|
| Ora ana cahya |
|
|
| Salah werna |
|
|
| Intensitas ora rata antarane ngarep lan mburi, kanthi voltage nyelehake |
|
|
FAQ
Apa aku kudu sinyal amplifier kanggo luwih saka 32 decoder?
An amplifier is required if connecting more than 32 decoders. Avoid signal amplification ngluwihi 5 kaping terus-terusan.
How to address recoil effects due to long signal lines?
To address recoil effects, connect a 0.25W 90-120 terminal resistor at the end of each line affected by longer signal lines or poor quality.
Dokumen / Sumber Daya
 |
iskydance D24DMX512 4CH Konstan Voltaglan dekoder RDM [pdf] Manual pangguna D24, D24DMX512, D24DMX512 4CH Vol konstantage RDM Decoder, D24DMX512, 4CH Konstan Voltage RDM Decoder, Voltage RDM Decoder, RDM Decoder, Decoder |