Gunakake INSTRUCTIONS
Programmer Alamat Terminal
| PRG.PAS.MCS |
| 170 x 112 x 35 mm / 270 g |
| Plastic case + mechanical keyboard 0°C … 45°C – IP 31 |
| Sumber daya: 9V (baterei / baterei sing bisa diisi ulang) |
| Sambungan menyang terminal liwat UTP Patch Kabel 0.25 cm |
| Alamat kasedhiya kanggo pemrograman: antarane "000" lan "998" Ngetik "999" mungkasi program alamat. |
DESKRIPSI
Ing PRG.PAS.MCS programmer allows the programming of the address (apartment number) for all types of terminals in the Garis Klasik range: PAS.17A, PAS.27X, PAS.37X, MCS.47X.
This programmer serves as the mobile alternative to the terminal address programming function, enabling the address to be programmed both on-site and in the office, by a single person.
SAMBUNGAN menyang TERMINAL
- Kabel UTP Patch 0.25 cm
- Mbalik
- Ngarep
- PRG.PAS.MCS Programmer
- Video terminal – audio (MCS.47X, PAS.27X, PAS.37X)
ON / OFF
- The programmer is turned on by pressing the ON key.
- The programmer turns off:
– 3 seconds after entering the last digit of the programmed address;
– 10 seconds after being turned on, if no key is pressed.
PEMROGRAMAN
Langkah 1: Connect the programmer to the terminal.
Langkah 2: Tekan ing ON key on the programmer → The display shows [Alamat kiriman].
Langkah 3: On the terminal, press and hold the 
kuncine.
Langkah 4: On the programmer, enter the terminal address to be programmed (3 digits required). After entering the last digit, the terminal will issue a confirmation beep, and the key can be released.
07.2025 INS.PRG.PAS.MCS
DIBUAT ing EU dening:
ELEKTRA srl
Parc Industrial Miroslava
Str. Principala 33, 707307, Jud. Iki - RO
+40 232 214.370
sales@electra.ro
www.electra.ro
DUKUNGAN
ELECTRA Building Communications GmbH
Gadnergasse 71, Stockwerk 1, Büro Top 132
1110 Wien – AT
+43 1 810 20 99
sales@electra-automation.at
www.electra-automation.at
Dokumen / Sumber Daya
 |
Electra PAS.17A Terminal Address Programmer [pdf] Instruksi Manual PAS.17A, PAS.27X, PAS.37X, MCS.47X, PAS.17A Terminal Address Programmer, PAS.17A, Terminal Address Programmer, Address Programmer, Programmer |