EDA TEC ED-MONITOR-156C Industrial Monitor and Display
Informasi produk
Spesifikasi
- Product Name: ED-MONITOR-156C
- Produsen: EDA Technology Co., Ltd
- Tanggal Rilis: 1 Agustus 2025
- Input Daya: 12V ~ 24V DC
- Output Audio: Jack stereo 3.5mm
- Video Input: HDMI Type-A
- USB Port: Type-C for touch screen signals
- Pemasangan: VESA kompatibel
Pandhuan Panggunaan Produk
- The ED-MONITOR-156C is a high-quality monitor designed for various applications.
- The monitor comes with a front panel, rear panel, and side panel, each with specific interfaces and functions.
- The front panel houses the display screen and control buttons for adjusting settings.
- The rear panel features installation holes for mounting the monitor securely.
- The side panel includes important interfaces such as power input, audio output, HDMI input, and USB touch screen port.
- The monitor includes buttons for adjusting backlight brightness and volume levels. The buttons are labeled for easy identification.
- The red power indicator on the monitor displays the power status, indicating whether the device is powered on or off.
- Each interface on the ED-MONITOR-156C serves a specific purpose, such as power input, audio output, and video input.
Manual Hardware
- Bab iki pirso produk liwatview, daftar pengepakan, tampilan, tombol, indikator, lan antarmuka.
Swaraview
The ED-MONITOR-156C is a 15.6-inch industrial touch monitor featuring a screen resolution of 1920×1080, a high brightness of 450 cd/m², and a multi-touch capacitive touch screen. It includes one standard HDMI interface, one Type-C USB port, one DC Jack power interface, and one 3.5mm audio jack, making it compatible with various general-purpose PC hosts. The backlight and volume can be adjusted via buttons and software, and it is primarily used in industrial control applications.
- The HDMI interface allows direct connection to the HDMI output of a PC host.
- The Type-C USB port transmits touch screen signals.
- The 3.5mm audio jack supports headphone connectivity.
- The DC Jack power interface supports 12V~24V DC input.
Daftar Packing
- 1x ED-MONITOR-156C Monitor
- 1 x Mounting Kit (including 4 x buckles, 4xM4*10 screws and 4xM4*16 screws)
Penampilan
- Bagean iki ngenalake fungsi lan definisi antarmuka ing saben panel.
Panel ngarep
- Ngenalke jinis lan definisi antarmuka ing panel ngarep.
| NO. | Katrangan |
| 1 | 1 × LCD screen, 15.6-inch touch screen with a resolution of 1920×1080, multi-touch capacitive touch screen. |
Panel mburi
- Ngenalke jinis lan definisi antarmuka ing panel mburi.
| NO. | Katrangan |
| 1 | 4 x installation holes of snaps, which are used to fix the snaps to the device for installation. |
| 2 | 4 x VESA bolongan soyo tambah, dilindhungi undhang-undhang kanggo instalasi krenjang VESA. |
Panel sisih
- Ngenalke jinis lan definisi antarmuka ing panel sisih.
| NO. | Katrangan |
| 1 | 1 x red power indicator, used to view status daya-on lan mateni piranti. |
| 2 | 1 x input DC, konektor Jack DC, sing ndhukung input 12V ~ 24V DC. |
| 3 | Jack output audio stereo 1 x 3.5mm, ndhukung konektivitas headphone. |
| 4 | 1 x input HDMI, konektor Tipe-A, sing nyambung menyang output HDMI host PC. |
| 5 | 1 x USB touch screen port, Type-C USB connector, which connects to the USB port of a PC host to transmit touch screen signals. |
| 6 | Bolongan boros panas, sing mbantu ningkatake kinerja pendinginan. |
| 7 | 1 x Rubber plug (pre-drilled 7mm diameter circular cable routing hole), designed to accommodate additional cable management needs. |
| 8 | 1 x “Brightness –” button, press the button to decrease the backlight brightness of the LCD screen. |
| 9 | 1 x tombol "Padhang +", penet tombol kanggo nambah padhange latar mburi layar LCD. |
| 10 | 1 x tombol "Volume -", pencet tombol kanggo nyuda volume output. |
| 11 | 1 x tombol "Volume +", pencet tombol kanggo nambah volume output. |
| 12 | 1 x tombol "Bisu", pencet tombol kanggo bisu audio output. |
| 13 | Bolongan boros panas, sing mbantu ningkatake kinerja pendinginan. |
Tombol
- ED-MONITOR-156C device includes two backlight brightness adjustment buttons and three volume adjustment buttons.
- The buttons are black in color and marked with screen-printed labels
ing omah.
Indikator
- Piranti ED-MONITOR-156C kalebu indikator daya abang, ditandhani karo label sing dicithak layar "PWR" ing omah.
| Indikator | Status | Katrangan |
| PWR | On | Piranti wis diuripake. |
| kethip-kethip | Power supply of the device is abnormal. Please stop the power supply immediately. | |
| Mati | Piranti ora diuripake. |
Antarmuka
- Ngenalke definisi lan fungsi saben antarmuka ing ED-MONITOR-156C.
Antarmuka Daya
- Piranti ED-MONITOR-156C kalebu 1 port input daya kanthi konektor Jack DC, kanthi label "24V DC" ing omah. Ndhukung input 12V ~ 24V DC.
TIP
A 12V 4A power adapter is recommended.
HDMI Interface
- Piranti ED-MONITOR-156C kalebu 1 antarmuka input HDMI kanthi konektor Tipe-A, kanthi label "HDMI INPUT" ing omah, digunakake kanggo nyambung menyang output HDMI host PC.
Antarmuka USB Tipe-C
- Piranti ED-MONITOR-156C kalebu 1 antarmuka USB Tipe-C, kanthi label "USB TOUCH" ing omah. Antarmuka iki nyambung menyang port USB host PC kanggo ngirim sinyal layar tutul.
Antarmuka Audio
- ED-MONITOR-156C device includes 1 audio interface (3.5mm 4-pole headphone jack), labeled “
” on the housing, supporting stereo audio output.
Nginstal piranti
- ED-MONITOR-156C device supports front embedded installation. The standard packaging includes the embedded installation Mounting kit (ED-ACCHMI-Front).
Persiapan
- The ED-ACCHMI-Front Mounting kit has been acquired (includes 4 × M4*10 screws, 4 × M4*16 screws, and 4 snaps).
- A screwdriver salib wis disiapake.
Langkah-langkah:
- Determine the cutout dimensions on the cabinet based on the ED-MONITOR-156C’s size, as shown in the figure below.
- Drill holes on the cabinet according to the aperture size defined in Step 1.
- Embed the ED-MONITOR-156C into the cabinet from the exterior side.
- Align the screw holes (non-threaded) of the snaps with the snap mounting holes on the device side.
- Secure the snaps to the device.
- Use 4 × M4*10 screws to fasten the snaps to the device by threading them through the non-threaded holes and tightening them clockwise.
- Then, use 4 × M4*16 screws to secure the snaps to the cabinet: Insert them through the threaded holes of the snaps, press against the interior side of the cabinet, and thread them clockwise until fully tightened.
Nggunakake piranti
- ED-MONITOR-156C requires a PC host for operation and does not require driver installation.
- Connect it to the HDMI output of a PC host first, then power on the device to enable normal display. It supports backlight and volume adjustment via dedicated buttons and software.
Nyambung Kabel
- Bagian iki nerangake carane nyambungake kabel.
Preparation:
- A functional power adapter has been acquired.
- A functional PC host has been acquired.
- Functional HDMI and USB cables (Type-A to Type-C USB cable) have been acquired.
Diagram skematis kabel sambungan:
Please refer to 1.6 Interface to obtain the pin definitions and wiring methods of each interface.
TIP
The HDMI INPUT interface of the ED-MONITOR-156C is compatible with various PC hosts. The figure below illustrates cable connection using a Raspberry Pi as an example.
Booting piranti
- The ED-MONITOR-156C does not include a physical power switch.
- After connecting to a power source, the device will automatically power on. Once fully booted, it will display the desktop of the connected PC host.
Adjusting brightness and Volume
- ED-MONITOR-156C ndhukung padhang lan pangaturan volume liwat tombol fisik lan piranti lunak.
Adjust brightness and volume via buttons
- Sawise ED-MONITOR-156C wis operasional, padhange lan volume lampu latar layar bisa diatur liwat limang tombol khusus sing ana ing panel sisih.
Adjust Brightness and Volume via Software
- Sawise ED-MONITOR-156C disambungake menyang host PC lan ditampilake kanthi bener, lampu latar layar lan volume output bisa diatur liwat piranti lunak. Cara operasi beda-beda kanggo versi Desktop lan Lite OS.
Raspberry Pi OS (Desktop)
- Ngenalke carane nyetel padhange lampu latar liwat UI ing Raspberry Pi OS (Desktop).
Preparation:
- ED-MONITOR-156C is properly connected to the Raspberry Pi host with normal display output.
- The Raspberry Pi host has stable network connectivity.
Langkah-langkah:
- Add EDATEC apt repository by executing the following commands sequentially in the terminal.
- Install the software toolkit.
- Klik ing
icon in the top-left desktop corner. Then select to “System Tools” → “EDATEC Monitor”.
- Adjust brightness and volume using the slider in the “EDATEC Backlight” panel.
TIP
Dhukungan nglakokake perintah sudo ed-ddc-ui ing jendela terminal kanggo mbukak panel "EDATEC Backlight".
Raspberry Pi OS (Lite)
- Nyetel padhang lan volume liwat CLI ing Raspberry Pi OS (Lite).
Preparation:
- ED-MONITOR-156C is properly connected to the Raspberry Pi host with normal display output.
- The Raspberry Pi host has stable network connectivity.
Langkah-langkah:
- Add the EDATEC apt repository by executing the following commands sequentially in the terminal.
- Install the software toolkit.
- Execute the following commands to query the current brightness level and volume level settings separately.
- Query current brightness level:
- Query current volume level:
- Query current brightness level:
- Execute the following commands to set the brightness level and volume level as required.
- Setel tingkat padhang:
- Where X represents the brightness level with a range of 0~100.
- Set volume level:
- Yen Y nuduhake tingkat volume kanthi kisaran 0~100.
- Setel tingkat padhang:
KONTAK
- Email: sales@edatec.cn / support@edatec.cn
- Web: www.edatec.cn
- Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
FAQ
Q: How do I adjust the backlight brightness on the monitor?
A: Press the Brightness button to increase the backlight brightness and the Brightness button to decrease it.
Q: Can I connect headphones to this monitor for audio output?
A: Yes, you can use the 3.5mm stereo audio output jack on the side panel to connect headphones for audio output.
Q: What should I do if the power indicator is blinking?
A: If the power indicator is blinking, it indicates an abnormal power supply. Please stop the power supply immediately and check for issues.
Dokumen / Sumber Daya
 |
EDA TEC ED-MONITOR-156C Industrial Monitor and Display [pdf] Manual pangguna ED-MONITOR-156C Industrial Monitor and Display, ED-MONITOR-156C, Industrial Monitor and Display, Monitor and Display, and Display |