EDA TEC ED-HMI2120-070C Otomasi lan Kontrol Industri
Spesifikasi
- Model: ED-HMI2120-070C
- Ukuran Layar: 7-inci
- Prosesor: Raspberry Pi CM4
- Antarmuka: HDMI, USB 2.0, RS232, RS485, audio, Ethernet
- Dhukungan Jaringan: Wi-Fi, Ethernet, 4G
- Input daya: 9V ~ 36V DC
- Resolusi: Nganti 1024 × 600
Pandhuan Panggunaan Produk
- Instalasi:
- Selehake piranti ing permukaan sing stabil.
- Use the provided installation holes of buckle to securely fix the device in place.
- Sambungan daya:
- Connect the DC input using the provided 2-Pin 3.5mm pitch phoenix terminals with screw holes.
- Ensure the power input is within the range of 9V~36V for proper functioning of the device.
- Sambungan Antarmuka:
- Connect external devices to the RS232 and RS485 ports for third-party control equipment.
- Use the HDMI port for high-definition display output compatible with HDMI 2.0 standard.
- Utilize the Ethernet ports for network connectivity.
- Indikator pangguna:
- Customize user status using the green user indicator based on application requirements.
- Check device working status with the green system status indicator.
- Monitor power status with the red power indicator.
- Konektivitas Audio:
- Use the Audio input/Stereo output for microphone input or line output as needed.
Pitakonan
P: Apa aku bisa nggunakake piranti tanpa nyambung menyang jaringan?
A: Yes, the device can be used independently without network connectivity for standalone applications.
Q: Apa tujuan saka supercapacitor ing prodhuk?
A: The supercapacitor serves as a backup power supply to ensure continuous operation during power outages utawa interupsi.
P: Kepiye carane ngatur indikator status?
A: Refer to the user manual for instructions on customizing the status indicators based on your specific application needs.
“`
ED-HMI2120-070C
Manual pangguna
dening EDA Technology Co., Ltd dibangun: 2025-08-01
ED-HMI2120-070C
Manual Hardware
Bab iki pirso produk liwatview, dhaftar packing, tampilan, tombol, indikator lan antarmuka.
1.1 Luwihview
ED-HMI2120-070C minangka HMI industri linuwih dhuwur 7 inci adhedhasar Raspberry Pi CM4. Miturut macem-macem skenario aplikasi lan kabutuhan pangguna, spesifikasi RAM lan sistem komputer eMMC sing beda bisa dipilih.
· Pilihan kanggo 1GB, 2GB, 4GB lan 8GB RAM · Pilihan kanggo panyimpenan eMMC 8GB, 16GB lan 32GB
ED-HMI2120-070C nyedhiyakake antarmuka umum kayata HDMI, USB 2.0, RS232, RS485, audio lan Ethernet, lan ndhukung akses menyang jaringan liwat Wi-Fi, Ethernet lan 4G. EDHMI2120-070C nyawiji supercapacitor (sumber daya serep, kang opsional), RTC, Watch Dog, EEPROM lan chip enkripsi, nambah ease saka nggunakake lan linuwih produk. Utamane digunakake ing kontrol industri lan IOT.
1.2 Daftar Packing
· 1x Unit ED-HMI2120-070C · 1 x Mounting Kit (kalebu 4 x gesper, 4xM410 sekrup lan 4xM416 sekrup) · [versi Wi-Fi/BT opsional] 1x 2.4GHz/5GHz Wi-Fi/BT Antena · [versi 4x1G4G opsional]
1.3 Penampilan
Ngenalke fungsi lan definisi antarmuka ing saben panel.
1.3.1 Panel ngarep
Ngenalke jinis antarmuka panel ngarep lan definisi.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
NO.
Definisi Fungsi
1 x tampilan LCD, layar tutul LCD 7-inci, sing ndhukung nganti resolusi 1024x600 lan multi-titik 1
layar demek kapasitif.
2
1 x kamera (opsional), kamera ngarep 8 Megapiksel.
1.3.2 Panel mburi
Ngenalke jinis lan definisi antarmuka panel mburi.
NO.
Definisi Fungsi
1
4 x bolongan instalasi saka Gesper, kang digunakake kanggo ndandani buckles kanggo piranti kanggo instalasi.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
1.3.3 Panel sisih
Ngenalke jinis lan definisi antarmuka panel sisih.
ED-HMI2120-070C
NO.
Definisi Fungsi
1
1 x indikator pangguna ijo, pangguna bisa ngatur status miturut aplikasi nyata.
2
1 x indikator status sistem ijo, sing digunakake kanggo mriksa status kerja piranti.
3
1 x indikator daya abang, sing digunakake kanggo mriksa status daya-on lan mateni piranti.
4
1 x indikator 4G ijo, sing digunakake kanggo mriksa status sinyal 4G.
5
4 x indikator UART ijo, digunakake kanggo mriksa status komunikasi port UART.
1 x input DC, 2-Pin 3.5mm pitch phoenix terminal karo bolongan meneng. 6
Ndhukung input 9V ~ 36V, sinyal kasebut ditetepake minangka VIN +/GND.
1 x Input Audio/Output Stereo, konektor jack audio 3.5mm. Bisa digunakake minangka MIC IN lan LINE OUT.
7
· Nalika headphone disambungake, output audio diowahi menyang headphone.
· Nalika headphone ora nyambung, output audio diuripake menyang speaker.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
D-HMI2120-070C
NO.
Definisi Fungsi
2 x RS232 port, 6-Pin 3.5mm pitch phoenix terminal, kang digunakake kanggo nyambungake kontrol pihak katelu 8
peralatan.
2 x port RS485, 6-Pin 3.5mm pitch phoenix terminal, sing digunakake kanggo nyambungake kontrol pihak katelu 9
peralatan.
1 x 10/100/1000M port ethernet adaptif, konektor RJ45, kanthi indikator sing dipimpin. Bisa digunakake kanggo ngakses 10
jaringan.
1 x 10/100M port ethernet adaptif, konektor RJ45, kanthi indikator sing dipimpin. Bisa digunakake kanggo ngakses 11
jaringan.
1 x port HDMI, konektor tipe A, sing kompatibel karo standar HDMI 2.0 lan ndhukung 4K 60Hz. 12
Ndhukung kanggo nyambungake displayer.
13
2 x USB 2.0 port, jinis konektor A, saben saluran ndhukung nganti 480Mbps tingkat transmisi.
14
1 x tombol Reset, menet tombol bakal ngreset piranti.
15
1 x port antena Wi-Fi/BT, konektor SMA, sing bisa nyambung menyang antena Wi-Fi/BT.
16
1 x port antena 4G, konektor SMA, sing bisa nyambung menyang antena 4G.
17
1 x port Micro USB, sing ndhukung kanggo kerlip menyang eMMC kanggo sistem.
18
1 x slot Nano SIM, sing digunakake kanggo nginstal kertu SIM kanggo njupuk sinyal 4G.
19
1 x slot kertu Micro-SD, kang digunakake kanggo nginstal kertu SD kanggo nyimpen data pangguna.
1.4 Tombol
ED-HMI2120-070C kalebu tombol RESET, yaiku tombol sing didhelikake, lan layar sutra ing kasus kasebut yaiku "RESET". Pencet tombol RESET bakal ngreset piranti.
1.5 Indikator
Ngenalake macem-macem status lan makna indikator sing ana ing ED-HMI2120-070C.
Indikator PWR ACT
Status Aktif
kethip-kethip
Mati Kedip Mati
Katrangan Piranti wis diuripake. Pasokan daya piranti ora normal, mangga mateni sumber daya langsung. Piranti ora diuripake. Sistem diwiwiti kanthi sukses lan maca lan nulis data. Piranti ora diuripake utawa ora maca lan nulis data.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
Indikator USER 4G Indikator kuning saka port Ethernet
Indikator ijo saka port Ethernet COM1~COM4
Status Aktif
Mati
On Off On Blink Off On Blink Off On/Blink Off
Katrangan Pangguna bisa ngatur status miturut aplikasi nyata. Piranti ora diuripake utawa ora ditetepake dening pangguna, lan status gawan mati. Dial-up sukses lan sambungan normal. Sinyal 4G ora nyambung utawa piranti ora urip. Pangiriman data ora normal. Data lagi dikirim liwat port Ethernet. Sambungan Ethernet ora diatur. Sambungan Ethernet ing negara normal. Sambungan Ethernet ora normal. Sambungan Ethernet ora diatur. Data lagi dikirim. Piranti ora diuripake utawa ora ana transmisi data.
1.6 Antarmuka
Ngenalke definisi lan fungsi saben antarmuka ing produk.
1.6.1 Slot kertu
ED-HMI2120-070C kalebu slot kertu SD lan slot kertu SIM Nano.
1.6.1.1 Slot kertu SD
Silkscreen ing cilik saka slot kertu Micro SD punika "", kang digunakake kanggo nginstal kertu SD kanggo nyimpen data pangguna.
1.6.1.2 Slot kertu SIM
Layar sutra ing kasus slot kertu SIM Nano yaiku "", sing digunakake kanggo nginstal kertu SIM kanggo entuk sinyal 4G.
1.6.2 Power Supply Antarmuka
ED-HMI2120-070C kalebu siji input daya, 2-Pin 3.5mm pitch phoenix terminal karo bolongan meneng. Silkscreen port punika "VIN + / GND", lan lencana ditetepake minangka nderek.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
ID PIN 1 2
Jeneng Pin GND 9V~36V
1.6.3 Antarmuka Audio
ED-HMI2120-070C kalebu siji input audio, konektor punika 3.5mm 4-pole headphone Jack. Layar sutra port yaiku "", sing ndhukung output headphone stereo OMTP lan rekaman mikropon mono.
· Nalika headphone disambungake, output audio dialihake menyang headphone. · Nalika headphone ora nyambung, output audio diuripake menyang speaker.
1.6.4 Speaker
ED-HMI2120-070C ngemot daya ampoutput lifier, dibangun ing speaker 4 3W, ndhukung output stereo saluran siji. Nalika muter audio, yen headphone disambungake menyang antarmuka Audio, speaker ora bakal duwe output audio.
1.6.5 Antarmuka RS232
ED-HMI2120-070C kalebu 2 port RS232, 6-Pin 3.5mm pitch phoenix terminal. Layar sutra RS232 tunggal yaiku "IGND/TX/RX". Definisi Pin Pin terminal ditetepake kaya ing ngisor iki:
ID PIN 1 2 3 4 5 6
Jeneng Pin GND GND RS232-1_TX RS232-3_TX RS232-1_RX RS232-3_RX
Jeneng pin CM4 sing cocog karo antarmuka RS232 yaiku:
Sinyal RS232-1_TX RS232-3_TX
CM4 GPIO Jeneng GPIO4 GPIO0
CM4 Pin Out UART3_TXD UART2_TXD
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
Sinyal RS232-1_RX RS232-3_RX
CM4 GPIO Jeneng GPIO5 GPIO1
Diagram skematis kabel sambungan kabel RS232 kaya ing ngisor iki:
CM4 Pin Out UART3_RXD UART2_RXD
ED-HMI2120-070C
1.6.6 RS485
ED-HMI2120-070C kalebu 2 port RS485, 6-Pin 3.5mm pitch phoenix terminal. Layar sutra RS485 tunggal yaiku "IGND/A/B". Definisi Pin Pin terminal ditetepake kaya ing ngisor iki:
ID PIN 1 2 3 4 5 6
Jeneng Pin GND GND RS485-2_A RS485-4_A RS485-2_B RS485-4_B
Jeneng pin CM4 sing cocog karo antarmuka RS485 yaiku:
Sinyal RS485-2_A RS485-4_A RS485-2_B RS485-4_B
CM4 GPIO Jeneng GPIO12 GPIO8 GPIO13 GPIO9
CM4 Pin Out UART5_TXD UART4_TXD UART5_RXD UART4_RXD
Diagram skematis kabel sambungan kabel RS485 kaya ing ngisor iki:
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
Konfigurasi resistance terminal RS485 ED-HMI2120-070C ngemot 2 port RS485. Resistor jumper 120R dilindhungi undhang-undhang antarane A lan B saka baris RS485. Tutup jumper bisa dipasang kanggo ngaktifake resistor jumper. Kanthi gawan, tutup jumper ora disambungake, lan 120R fungsi resistor jumper dipatèni. Posisi resistor jumper ing PCBA yaiku J24 lan J22 ing gambar ing ngisor iki (posisi kothak abang).
Hubungan antarane port RS485 lan port COM sing cocog ditampilake ing tabel ing ngisor iki.
Lokasi ing PCBA J24 J22
Port COM cocog COM4 COM2
Lokasi tartamtu saka COM cocog
TIP
Sampeyan kudu mbukak kasus piranti kanggo view posisi 120R jumper resistor. Kanggo operasi rinci, waca 2.1.1 Bukak Piranti Case.
1.6.7 1000M Ethernet Interface
ED-HMI2120-070C kalebu port Ethernet adaptif 10/100/1000M, lan layar sutra
” “. Konektor punika RJ45, kang bisa ndhukung PoE karo modul expansion. Nalika ngakses jaringan, disaranake nggunakake kabel jaringan Cat6 lan ndhuwur. Pin sing cocog karo terminal ditetepake kaya ing ngisor iki:
ID PIN 1 2 3
Jeneng Pin TX1+ TX1TX2+
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
4
TX2-
5
TX3+
6
TX3-
7
TX4+
8
TX4-
1.6.8 100M Ethernet Interface
ED-HMI2120-070C kalebu port Ethernet adaptif 10/100M, lan layar sutra
” “. Konektor punika RJ45, lan dianjurake kanggo nggunakake kabel jaringan karo Cat6 lan ndhuwur nalika ngakses jaringan. Pin sing cocog karo terminal ditetepake kaya ing ngisor iki:
ID PIN 1 2 3 4 5 6 7 8
Jeneng Pin TX+ TXRx+ RX-
1.6.9 Antarmuka HDMI
ED-HMI2120-070C kalebu siji port HDMI, layar sutra "HDMI". Konektor yaiku HDMI tipe A, sing bisa nyambung menyang tampilan HDMI lan ndhukung nganti 4Kp60.
1.6.10 USB 2.0 Antarmuka
ED-HMI2120-070C kalebu 2 port USB2.0, layar sutra "". Konektor kasebut yaiku USB tipe A, sing bisa nyambung menyang periferal USB 2.0 standar lan ndhukung nganti tingkat transmisi 480Mbps.
1.6.11 Antarmuka USB mikro
ED-HMI2120-070C kalebu siji antarmuka Micro USB, layar sutra "PROGRAMMING" lan bisa disambungake menyang PC kanggo kerlip menyang eMMC piranti.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
1.6.12 Antarmuka Antena (opsional)
ED-HMI2120-070C kalebu 2 port antena SMA, layar sutra "4G" lan "Wi-Fi / BT" lan bisa disambungake menyang antena 4G lan Wi-Fi / BT antena.
TIP Jumlah antarmuka antena gegandhengan karo model produk tuku. Ing kene, kita njupuk rong antarmuka antena minangka mantanample.
1.6.13 Antarmuka Motherboard
Ngenalke antarmuka sing dilindhungi undhang-undhang ing ED-HMI2120-070C, sing bisa dipikolehi mung sawise kasus piranti dibukak lan bisa ditambahi miturut kabutuhan nyata.
NO.
Fungsi
1
Output Daya 12V 1A
2
10-Pin GPIO Pin Header
3
40-Pin GPIO Pin Header
4
M.2 B
5
Baterei RTC
6
USB 2.0 Pin Header
7
Antarmuka CSI
8
Antarmuka HDMI FPC
1.6.13.1 12V 1A Output
Papan induk ED-HMI2120-070C kalebu 3 port output daya 12V 1A sing ditambahi karo konektor WTB putih 2Pin 2.0mm, sing dilindhungi undhang-undhang kanggo layar LCD lengkap kanggo nyuplai daya. Pin ditetepake kaya ing ngisor iki:
Pin ID
Jeneng Pin
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
1
GND
2
12V
1.6.13.2 10-Pin GPIO
Motherboard ED-HMI2120-070C kalebu 10-Pin GPIO Pin Header karo 2 × 5-Pin 2.54mm Jarak, kang digunakake kanggo mimpin metu port GPIO lengkap. Pangguna bisa ngatur ekstensi, lan definisi pin kaya ing ngisor iki:
ID PIN 1 2 3 4 5 6 7 8 9 10
Jeneng Pin EXIO_P10 3V3 EXIO_P12 EXIO_P11 EXIO_P14 EXIO_P13 EXIO_P16 EXIO_P15 GND EXIO_P17
1.6.13.3 40-Pin GPIO
Motherboard ED-HMI2120-070C kalebu 40-Pin GPIO terminal karo 2 × 20-Pin 2.54mm Jarak, kang digunakake kanggo mimpin metu port GPIO CM4, lan cadangan kanggo nyambungake aksesoris lengkap. Pin ditetepake kaya ing ngisor iki:
ID PIN 1 3 5 7 9 11
Jeneng Pin 3V3_EXT GPIO2 GPIO3 GPIO4 GND GPIO17
ID PIN 2 4 6 8 10 12
Jeneng Pin 5V2_CM4 5V2_CM4 GND GPIO14 GPIO15 GPIO18
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
13
GPIO27
14
GND
15
GPIO22
16
GPIO23
17
3V3_EXT
18
GPIO24
19
GPIO10
20
GND
21
GPIO9
22
GPIO25
23
GPIO11
24
GPIO8
25
GND
26
GPIO7
27
GPIO0
28
GPIO1
29
GPIO5
30
GND
31
GPIO6
32
GPIO12
33
GPIO13
34
GND
35
GPIO19
36
GPIO16
37
GPIO26
38
GPIO20
39
GND
40
GPIO21
Cathetan: GPIO4~GPIO9GPIO12GPIO13 lan GPIO22~GPIO27 wis digunakake kanggo fungsi tartamtu liyane. Yen sampeyan kudu nggunakake fungsi IO biasa, sampeyan kudu mbusak resistance jumper ing baris sinyal cocog.
1.6.13.4 M.2 B Antarmuka
Motherboard ED-HMI2120-070C kalebu konektor M.2 B Key, kang digunakake kanggo SSD external. Iku kompatibel karo M.2 B 2230 lan M.2 B 2242 SSD.
1.6.13.5 Base baterei RTC
Papan induk ED-HMI2120-070C digabungake karo RTC. Kanggo versi sing didol ing China, kita bakal nginstal baterei CR1220 (sumber daya serep RTC) kanthi standar.
RTC bisa mesthekake yen sistem wis jam uninterrupted lan dipercaya, kang ora kena pengaruh dening faktor kayata piranti mati daya.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
TIP
Sawetara logistik internasional ora ndhukung transportasi baterei, lan sawetara piranti exfactory ora dilengkapi baterei CR1220. Mulane, sadurunge nggunakake RTC, mangga nyiyapake baterei CR1220 lan nginstal ing motherboard.
1.6.13.6 USB 2.0 Antarmuka
Papan induk ED-HMI2120-070C kalebu USB 2.0 Pin Header kanthi konektor WTB pitch 5-Pin 1.5mm. Iki digunakake kanggo nggedhekake antarmuka USB 2.0, pin ditetepake kaya ing ngisor iki:
ID PIN 1 2 3 4 5
Jeneng Pin VBUS USB_DM USB_DP GND GND
1.6.13.7 Antarmuka CSI
Motherboard ED-HMI2120-070C kalebu siji antarmuka CSI lengkap, 2 × 15-Pin konektor Jarak 0.4mm lan sinyal 2-Lane CSI. Iki digunakake kanggo nggedhekake sambungan kamera CSI 8 megapiksel, pin kasebut ditetepake kaya ing ngisor iki:
ID PIN 1 3 5 7 9 11 13 15 17 19 21
Jeneng Pin NC 1V8_CM4 1V8_CM4 CSI_MCLK GND NC NC GND NC GND CSI_D1_P
ID PIN 2 4 6 8 10 12 14 16 18 20 22
Jeneng Pin NC 1V2_CSI GND GND 2V8_CSI NC NC GND NC CSI_D1_N GND
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
23
CSI_D0_N
25
GND
27
CSI_CLK_P
29
SCL_1V8
24
CSI_D0_P
26
CSI_CLK_N
28
GND
30
SDA_1V8
1.6.13.8 FPC HDMI Antarmuka
Papan induk ED-HMI2120-070C kalebu siji antarmuka HDMI lengkap karo konektor FPC jarak 40-pin 0.5mm. Ndhukung output sinyal video menyang layar LCD, cadangan kanggo nyambungake layar LCD lengkap. Ndhukung layar tutul USB/I2C lan pangaturan lampu latar. Pin ditetepake kaya ing ngisor iki:
ID PIN 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39
Jeneng Pin NC NC NC NC HDMI1_CLKN GND HDMI1_TX0N GND HDMI1_TX1N GND HDMI1_TX2N GND HDMI1_CEC HDMI1_SCL GND GND GND SCL_LCD GND USB_DM_LCD
ID PIN 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Jeneng Pin NC NC NC GND HDMI1_CLKP GND HDMI1_TX0P GND HDMI1_TX1P GND HDMI1_TX2P GND GND HDMI1_SDA HDMI1_HPD TPINT_L SDA_LCD GND USB_DP_LCD GND
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
Installing Components optional
Bab iki nerangake carane nginstal komponen opsional.
2.1 Nginstal Komponen Internal
Ngenalke operasi rinci mbukak / nutup kasus piranti lan nginstal baterei RTC. Sadurunge nginstal komponen internal, perlu kanggo mbukak kasus piranti.
2.1.1 Mbukak Case Piranti
Preparation: A screwdriver salib wis disiapake. Langkah: 1. Narik metu konfigurasi standar konektor phoenix (lanang kanggo wiring). 2. Gunakake screwdriver kanggo loosen loro ngawut-awut M3 ing loro-lorone counterclockwise.
3. Copot tutup sisih sisih tengen.
4. Gunakake screwdriver kanggo loosen papat ngawut-awut M3 lan siji grounding meneng ing loro-lorone counterclockwise.
5. Copot kasus logam munggah lan nguripake menyang sisih bandar.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
6. Gunakake screwdriver kanggo loosen 8 ngawut-awut ndandani PCBA counterclockwise, lan loncat karo muter awak menyang mburi PCBA.
2.1.2 Instal baterei RTC
TIP Sawetara logistik internasional ora ndhukung transportasi baterei, lan sawetara piranti exfactory ora dilengkapi baterei CR1220. Mulane, sadurunge nggunakake RTC, mangga nyiyapake baterei CR1220 lan nginstal ing motherboard.
Persiapan: · Kasing piranti wis dibukak. · Baterei CR1220 wis disiapake.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
Langkah-langkah: 1. Goleki basis baterei RTC ngendi baterei bakal diinstal, minangka ditampilake ing kothak abang
ngisor.
2. Pasang kutub positif baterei munggah lan pencet menyang basa RTC. Efek instalasi kaya ing ngisor iki.
2.1.3 Nutup Case Piranti
Preparation: A screwdriver salib wis disiapake. Langkah-langkah: 1. Nguripake PCBA menyang ngarep lan nyelehake ing mburi layar LCD. Selarasake 8 sekrup
bolongan ing PCBA karo bolongan kandang jaran ing mburi layar LCD. Lebokake 8 sekrup sing dipasang, banjur gunakake obeng kanggo ngencengi searah jarum jam kanggo ndandani PCBA ing sisih mburi layar LCD.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
2. Flip cilik logam munggah, kempal bolongan soyo tambah meneng ing cilik logam karo bolongan soyo tambah meneng ing mburi layar LCD, lan nutupi mudhun ing mburi layar LCD.
3. Selarasake bolongan meneng ing panel sisih cilik logam, masang 4 M3 ngawut-awut lan siji grounding meneng, banjur ngencengi clockwise karo screwdriver.
4. Selarasake bandar ing PCBA karo bandar ing panel sisih, masang tutup sisih.
5. Pasang 2 ngawut-awut M3 lan banjur nggunakake screwdriver kanggo ngencengi loro ngawut-awut M3 searah jarum jam.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
6. Pasang konektor phoenix standar.
2.2 Nginstal / Mbusak Komponen njaba
Ngenalke operasi rinci nginstal / mbusak sawetara aksesoris opsional.
2.2.1 Pasang Antena
Yen tuku ED-HMI2120-070C kalebu fungsi 4G lan Wi-Fi, antena kudu diinstal sadurunge nggunakake piranti. Preparation: Antena sing cocog wis dipikolehi saka kothak kemasan. Yen ana sawetara antena, bisa dibedakake kanthi label ing antena kasebut. Langkah: 1. Golek lokasi port antena, minangka ditampilake ing tandha abang tokoh ngisor.
2. Selarasake port ing loro-lorone piranti lan antena lan kenceng searah jarum jam kanggo mesthekake yen padha ora bakal tiba.
2.2.2 Instal Micro SD Card
Yen sampeyan kudu nginstal kertu SD nalika nggunakake produk, sampeyan bisa waca pandhuan ing ngisor iki. Preparation: kertu SD wis siyap. Langkah: 1. Golek lokasi slot kertu SD, minangka ditampilake ing tandha abang tokoh ngisor.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
2. Lebokake kertu Micro SD menyang slot kertu cocog karo sisih kontak madhep mudhun, lan krungu swara kanggo nunjukaké sing instalasi wis rampung.
2.2.3 Narik metu kertu SD
Yen sampeyan kudu nyopot kertu SD nalika nggunakake produk, sampeyan bisa waca pandhuan ing ngisor iki. Langkah: 1. Golek lokasi kertu SD, minangka ditampilake ing tandha abang tokoh ngisor.
2. Pencet kertu SD menyang slot kertu karo tangan kanggo pop metu, lan banjur narik metu kertu SD.
2.2.4 Pasang kertu SIM Nano
Yen piranti tuku ED-HMI2120-070C kalebu fungsi 4G, kertu SIM kudu diinstal sadurunge nggunakake 4G. Preparation: Kertu SIM Nano 4G wis siyap. Langkah: 1. Golek lokasi slot kertu Nano SIM, minangka ditampilake ing tandha abang tokoh ngisor.
2. Lebokake kertu Nano SIM menyang slot kertu cocog karo chip sisih munggah, lan krungu swara kanggo nunjukaké sing instalasi wis rampung.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
Nginstal Piranti
Bab iki pirso carane nginstal piranti.
3.1 Instalasi Embedded
ED-HMI2120-070C ndhukung instalasi ngarep ditempelake, kang dilengkapi kit soyo tambah (kalebu 4 x buckles, 4xM4 * 10 ngawut-awut lan 4xM4 * 16 ngawut-awut). Preparation:
· Kit sing dipasang (kalebu 4 x gesper, 4xM4 * 10 sekrup lan 4xM4 * 16 sekrup) wis dipikolehi saka kothak kemasan.
· Obeng silang wis disiapake. Langkah-langkah: 1. Sampeyan kudu mesthekake ukuran bukaan kabinet miturut ukuran ED-HMI2120-070C, minangka
ditampilake ing gambar ing ngisor iki. Unit: mm
2. Pengeboran bolongan ing kabinèt miturut ukuran bolongan step1. 3. Lebokake ED-HMI2120-070C menyang kabinet saka njaba.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
4. Selarasake bolongan meneng (bolongan unthreaded) saka gesper karo bolongan soyo tambah Gesper ing sisih piranti.
5. Gunakake 4 M4 * 10 ngawut-awut kanggo pass liwat Gesper lan ngencengi clockwise kanggo ndandani gesper kanggo piranti; banjur nggunakake 4 M4 * 16 ngawut-awut kanggo pass liwat bolongan meneng (bolongan Utas) Gesper lan ngencengi clockwise kanggo mburi liwat buckles.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
Booting Piranti
Bab iki pirso carane nyambungake kabel lan boot piranti.
4.1 Sambungake Kabel
Bagian iki nerangake carane nyambungake kabel. Preparation:
· Aksesoris kayata tampilan, mouse, keyboard lan adaptor daya sing bisa digunakake biasane wis siyap.
· Jaringan sing bisa digunakake kanthi normal. · Entuk kabel HDMI lan kabel jaringan sing bisa digunakake kanthi normal. Diagram skematis saka kabel nyambungake: Mangga deleng 1.6 Antarmuka kanggo definisi pin saben antarmuka lan cara tartamtu saka wiring.
4.2 Booting Sistem Kanggo Pisanan
ED-HMI2120-070C ora duwe sumber daya switching. Sawise sumber daya disambungake, sistem bakal miwiti.
· Indikator PWR abang urip, nuduhake yen piranti wis diuripake kanthi normal. · Indikator ACT ijo kedhip, nuduhake yen sistem diwiwiti kanthi normal, lan banjur
logo Raspberry Pi bakal katon ing pojok kiwa ndhuwur layar.
TIP Jeneng pangguna standar yaiku pi, Sandi standar yaiku raspberry.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
4.2.1 Raspberry Pi OS (Desktop)
Yen versi Desktop sistem diinstal nalika produk ninggalake pabrik, sawise piranti diwiwiti, bakal langsung mlebu ing desktop, kaya sing ditampilake ing gambar ing ngisor iki.
4.2.2 Raspberry Pi OS (Lite)
Yen versi Lite saka sistem wis diinstal ing pabrik, jeneng panganggo standar pi bakal digunakake kanggo mlebu kanthi otomatis sawise piranti diwiwiti, lan sandi standar raspberry. Tokoh ing ngisor iki nuduhake yen sistem wis diwiwiti kanthi normal.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
Konfigurasi Sistem
Bab iki pirso carane ngatur sistem.
5.1 Nemokake IP Piranti
Nemokake IP Piranti
5.2 Remote Login
Login Jauh
5.3 Konfigurasi Piranti Panyimpenan
Konfigurasi Piranti Panyimpenan
5.4 Konfigurasi Ethernet IP
Konfigurasi Ethernet IP
5.5 Konfigurasi Wi-Fi (Opsional)
Konfigurasi Wi-Fi
5.6 Konfigurasi Bluetooth (Opsional)
Konfigurasi Bluetooth
5.7 Konfigurasi 4G (Opsional)
Konfigurasi 4G
5.8 Konfigurasi Buzzer
Konfigurasi Buzzer
5.9 Konfigurasi RTC
Konfigurasi RTC
ED-HMI2120-070C
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
5.10 Konfigurasi Port Serial
Bab iki ngenalake cara konfigurasi RS232 lan RS485.
5.10.1 Nginstal alat picocom
Ing lingkungan Linux, sampeyan bisa nggunakake alat picocom kanggo debug port serial RS232 lan RS485. Jalanake printah ing ngisor iki kanggo nginstal alat picocom.
sh sudo apt-get nginstal picocom
5.10.2 Konfigurasi RS232
ED-HMI2120-070C kalebu 2 port RS232, lan port COM lan piranti sing cocog files minangka nderek:
Jumlah Port RS232 2
Port COM cocog COM1, COM3
Piranti sing cocog File /dev/com1, /dev/com3
Persiapan: Port RS232 ED-HMI2120-070C wis disambungake karo piranti eksternal. Langkah: 1. Jalanake printah ing ngisor iki kanggo mbukak port serial com1, lan ngatur baud port serial
tarif kanggo 115200.
sh picocom -b 115200 /dev/com1
2. Input printah minangka needed kanggo ngontrol piranti external.
5.10.3 Konfigurasi RS485
ED-HMI2120-070C kalebu 2 port RS485, lan port COM lan piranti sing cocog files minangka nderek:
Jumlah Port RS485 2
Port COM cocog COM2, COM4
Piranti sing cocog File /dev/com2, /dev/com4
Preparation:
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
Port RS485 ED-HMI2120-070C wis disambungake karo piranti eksternal. Langkah: 1. Jalanake printah ing ngisor iki kanggo mbukak port serial com4, lan ngatur baud port serial
tarif kanggo 115200.
sh picocom -b 115200 /dev/com4
2. Input printah minangka needed kanggo ngontrol piranti external.
5.11 Konfigurasi Audio (Opsional)
Konfigurasi Audio
5.12 Konfigurasi Indikator USER
Konfigurasi Indikator USER
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
6 Nginstal OS (opsional)
Piranti kasebut dikirim nganggo sistem operasi kanthi standar. Yen OS rusak nalika digunakake utawa pangguna kudu ngganti OS, sampeyan kudu ngundhuh maneh gambar sistem sing cocog lan nginstal. Perusahaan kita ndhukung nginstal OS kanthi nginstal Raspberry Pi OS standar dhisik, banjur instal paket Firmware.
Bagean ing ngisor iki njlèntrèhaké operasi tartamtu saka download gambar, eMMC sumunar lan instalasi paket Firmware.
6.1 Ngundhuh OS File
Sampeyan bisa ndownload Raspberry Pi OS resmi sing cocog file miturut kabutuhan nyata, path download kapacak ing ngisor iki:
OS
Download Path
Raspberry Pi OS(Desktop) 64-bit-bookworm (Debian 12)
https://downloads.raspberrypi.com/raspios_arm64/images/ raspios_arm64-2024-07-04/2024-07-04-raspios-bookworm-arm64.img.xz (https://downloads.raspberrypi.com/raspios_arm64/images/ raspios_arm64-2024-07-04/2024-07-04-raspios-bookworm-arm64.img.xz)
Raspberry Pi OS(Lite) 64-bit-bookworm (Debian 12)
https://downloads.raspberrypi.com/raspios_lite_arm64/images/ raspios_lite_arm64-2024-07-04/2024-07-04-raspios-bookworm-arm64lite.img.xz (https://downloads.raspberrypi.com/raspios_lite_arm64/images/ raspios_lite_arm64-2024-07-04/2024-07-04-raspios-bookworm-arm64lite.img.xz)
Raspberry Pi OS(Desktop) 32-bit-bookworm (Debian 12)
https://downloads.raspberrypi.com/raspios_armhf/images/ raspios_armhf-2024-07-04/2024-07-04-raspios-bookworm-armhf.img.xz (https://downloads.raspberrypi.com/raspios_armhf/images/ raspios_armhf-2024-07-04/2024-07-04-raspios-bookworm-armhf.img.xz)
Raspberry Pi OS(Lite) 32-bit-bookworm (Debian 12)
https://downloads.raspberrypi.com/raspios_lite_armhf/images/ raspios_lite_armhf-2024-07-04/2024-07-04-raspios-bookworm-armhflite.img.xz (https://downloads.raspberrypi.com/raspios_lite_armhf/images/ raspios_lite_armhf-2024-07-04/2024-07-04-raspios-bookworm-armhflite.img.xz)
6.2 Kelip-kelip menyang eMMC
Disaranake nggunakake alat resmi Raspberry Pi. Jalur download kaya ing ngisor iki: · Raspberry Pi Imager: https://downloads.raspberrypi.org/imager/imager_latest.exe (https://downloads.raspberrypi.org/imager/imager_latest.exe)
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
· Formatter kertu SD: https://www.sdcardformatter.com/download/ (https://www.sdcardformatter.com/download/)
· Rpiboot: https://github.com/raspberrypi/usbboot/raw/master/win32/rpiboot_setup.exe (https://github.com/raspberrypi/usbboot/raw/master/win32/rpiboot_setup.exe)
Preparation:
· Ngundhuh lan nginstal piranti resmi menyang komputer wis rampung. · Kabel Micro USB menyang USB-A wis disiapake. · OS file wis dipikolehi.
Langkah-langkah:
Langkah-langkah kasebut diterangake nggunakake sistem Windows minangka example.
1. Sambungake kabel daya lan kabel USB sumunar (Micro-USB kanggo USB-A).
· Nyambung menyang kabel USB: Siji ujung disambungake menyang port Micro USB ing sisih piranti, lan ujung liyane disambungake menyang port USB ing PC.
· Nyambung menyang kabel daya: Siji mburi disambungake menyang DC 2Pin Phoenix terminal ing sisih piranti, lan mburi liyane disambungake menyang sumber daya external.
2. Pedhot sumber daya ED-HMI2120-070C lan banjur urip maneh. 3. Bukak alat rpiboot kanggo ngowahi drive kanthi otomatis dadi huruf
4. Sawise rampung huruf drive, huruf drive bakal pop munggah ing pojok tengen ngisor komputer.
5. Bukak SD Card Formatter, pilih huruf drive format, lan klik "Format" ing sisih tengen ngisor kanggo format.
6. Ing kothak pituduh pop-up, pilih "Ya". 7. Nalika format wis rampung, klik "OK" ing kothak pituduh. 8. Nutup Formatter kertu SD. 9. Bukak Raspberry Pi Imager, pilih "PILIH OS" lan pilih "Gunakake Custom" ing pop-up
pane.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
10. Miturut pituduh, pilih OS file ing dalan sing ditemtokake pangguna lan bali menyang kaca utama.
11. Klik "PILIH STORAGE", pilih piranti standar ing antarmuka "Panyimpenan", lan bali menyang kaca utama.
12. Klik "NEXT", pilih "NO" ing pop-up "Gunakake kustomisasi OS?" pane.
13. Pilih "YES" ing pop-up "Pènget" panel kanggo miwiti nulis gambar.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
14. Sawise nulis OS rampung, ing file bakal diverifikasi.
15. Sawise verifikasi rampung, klik "TERUS" ing kothak pop-up "Tulis Sukses". 16. Nutup Raspberry Pi Imager, copot kabel USB lan daya ing piranti maneh.
6.3 Nginstal Paket Firmware
Sawise sampeyan wis rampung sumunar menyang eMMC ing ED-HMI2120-070C, sampeyan kudu ngatur sistem kanthi nambah sumber edatec apt lan nginstal paket perangkat kukuh kanggo nggawe sistem bisa. Ing ngisor iki minangka mantanample saka Debian 12 (kutu buku) versi desktop.
Preparation:
· Lampu kilat menyang eMMC saka Raspberry Pi OS standar (kutu buku) wis rampung. · Piranti wis boot normal lan konfigurasi boot cocog wis rampung.
Langkah-langkah:
1. Sawise piranti diwiwiti kanthi normal, nglakokake printah ing ngisor iki ing panel printah kanggo nambah sumber edatec apt lan nginstal paket perangkat kukuh.
sh curl -s https://apt.edatec.cn/bsp/ed-install.sh | sudo bash -s hmi2120_070c
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
ED-HMI2120-070C
2. Sawise instalasi rampung, sistem reboots otomatis. 3. Jalanake printah ing ngisor iki kanggo mriksa apa paket perangkat kukuh wis diinstal
kasil.
sh dpkg -l | grep ed-
Asil ing gambar ing ngisor iki nuduhake yen paket perangkat kukuh wis diinstal kanthi sukses.
TIP Yen sampeyan wis nginstal paket perangkat kukuh sing salah, sampeyan bisa nglakokake sudo apt-get –purge remove package kanggo mbusak, ing ngendi "paket" yaiku jeneng paket.
Email: sales@edatec.cn / support@edatec.cn Web: www.edatec.cn
|
Telpon: +86-15921483028(China) | +86-18217351262(Jaban rangkah)
Dokumen / Sumber Daya
 |
EDA TEC ED-HMI2120-070C Otomasi lan Kontrol Industri [pdf] Manual pangguna ED-HMI2120-070C Otomasi lan Kontrol Industri, ED-HMI2120-070C, Otomasi lan Kontrol Industri, Otomasi lan Kontrol |