AUDIOMS AUTOMATIKA SED2 Single Ended to Differential Encoder Interface
FAQ
- Q: Kepiye carane ngodhe tambahan nalika disambungake menyang antarmuka SED2?
- A: Encoder incremental didhukung dening sumber daya 5V sing diwenehake dening driver servo DCS-100-A liwat port Encoder ing driver servo DCS-100-A.
- Q: Apa sing kudu ditindakake kanggo nyuda gangguan elektromagnetik?
- A: Kanggo nyuda gangguan elektromagnetik, nggunakake kabel shielded kanggo sambungan antarane antarmuka encoder SED2 lan driver servo DCS-100-A. Kajaba iku, supaya dawa kabel supaya cendhak sabisa.
Katrangan
Antarmuka encoder diferensial siji-rampung SED2 (Gambar 1.1) minangka pembalap baris sing ngowahi sinyal input siji-rampung (A, B lan Z) saka encoder inkremental dadi output diferensial (pelengkap) (A+, A-, B+, B -, Z+ lan Z-). Iku dimaksudaké kanggo sumber voltages saka encoders incremental ing sawetara saka 5V kanggo 24V, maksimum nganti 30V (Logika Transistor Dhuwur - HTL).
Antarmuka encoder SED2 digunakake kanggo sambungan encoder tambahan siji-rampung (opsional diferensial) menyang driver servo Audioms Automatika DC DCS-3010(-HV) utawa menyang driver servo DCS-100-A v.3, uga menyang sistem saka manufaktur liyane sing mbutuhake antarmuka encoder.
Sambungan antarmuka Encoder SED2
Antarmuka encoder diferensial siji-rampung SED2 nduweni 2 konektor (Gambar 2.1):
- Konektor 5-pole sing bisa dicopot kanggo sambungan karo encoder tambahan (Con.1 - Figure 2.1). Tabel 2.1 menehi pinout saka konektor kanggo nyambungake enkoder tambahan. Pull-up resistor saka 4.7 kΩ diselehake ing input A, B lan Z, lan
- Konektor 8-pin sing bisa dicopot (Con.2 - Figure 2.1) sing sinyal diferensial saka encoder tambahan kasedhiya ing wangun A +, A-, B +, B-, Z + lan Z-. Tabel 2.2 menehi katrangan babagan pin konektor iki.
Antarmuka encoder SED2 wis dibangun ing 2 LED indikator, abang ing sisih konektor Con.1 lan ijo ing sisih konektor Con.2 (Figure 2.1).
Tabel 2.1: Katrangan saka pin konektor 5-pin (Con.1)
 |
Pin No. | jeneng | Katrangan | Fungsi |
| 1 | G | GND - Encoder |
Sambungan encoder tambahan |
|
| 2 | Z | Saluran encoder Z - Input | ||
| 3 | B | B saluran encoder - Input | ||
| 4 | A | Saluran encoder - Input | ||
| 5 | +V | Encoder sumber daya |
Tabel 2.2: Katrangan saka pin konektor 8-pin (Con.2)
 |
Pin No. | jeneng | Katrangan | Fungsi |
| 1 | +V | Encoder power supply 5V nganti 24V |
Output sinyal encoder diferensial |
|
| 2 | A+ | Saluran encoder A+ - Output | ||
| 3 | A- | A- saluran encoder - Output | ||
| 4 | B+ | B+ saluran encoder - Output | ||
| 5 | B- | B- encoder saluran - Output | ||
| 6 | Z+ | Saluran encoder Z+ - Output | ||
| 7 | Z- | Saluran Z-encoder – Output | ||
| 8 | GND | GND |
Nyambungake antarmuka encoder SED2 menyang driver servo DCS-100-A
Gambar 2.2 menehi example saka nyambungake encoder tambahan siji-rampung kanggo driver servo DCS-100-A liwat antarmuka encoder SED2. Enkoder tambahan didhukung dening sumber daya 5V sing diwenehake dening driver servo DCS-100-A liwat port Encoder (Con.2 ing driver servo DCS-100-A).
CATETAN: Disaranake supaya dawa kabel antarane encoder incremental lan antarmuka encoder SED2 dadi cendhak sabisa.
Kanggo ngurangi impact saka gangguan elektromagnetik frekuensi dhuwur, dianjurake kanggo nggunakake kabel shielded kanggo sambungan antarmuka SED2 encoder karo driver servo DCS-100-A. Kabel sambungan encoder ora kudu luwih dawa tinimbang sing dibutuhake aplikasi tartamtu.
Kontak
REVISI DOKUMEN:
- Ver. 1.0, April 2024, Revisi awal
Kontak
- Audioms Automatika doo Kragujevac, Serbia
- web: www.audiohms.com
- e-mail: office@audiohms.com
Dokumen / Sumber Daya
 |
AUDIOMS AUTOMATIKA SED2 Single Ended to Differential Encoder Interface [pdf] Manual pangguna DCS-3010 -HV, DCS-100-A v.3, SED2 Single Ended to Differential Encoder Interface, SED2, SED2 Encoder Interface, Single Ended to Differential Encoder Interface, Differential Encoder Interface, Encoder Interface, Interface |