1. Pambuka
The Seeed Studio XIAO ESP32C6 is a compact and versatile single board computer designed for Internet of Things (IoT) and embedded projects. It integrates advanced wireless connectivity including 2.4GHz Wi-Fi 6, Bluetooth 5.3 (LE), Zigbee, and Thread (IEEE 802.15.4), making it suitable for a wide range of applications from smart home devices to industrial sensing. This manual provides essential information for setting up, operating, and maintaining your XIAO ESP32C6.
Gambar 1.1: Ngarep view of the Seeed Studio XIAO ESP32C6 board, showing the USB-C port and main chip.
2. Fitur Utama
- Konektivitas sing Ditingkatake: Combines 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5 (LE), and IEEE 802.15.4 radio connectivity, allowing for Thread and Zigbee protocols.
- Materi Asli: Supports building Matter-compliant smart home projects for enhanced interoperability.
- Keamanan Dienkripsi ing Chip: Powered by ESP32-C6, it offers enhanced encrypted-on-chip security via secure boot, encryption, and Trusted Execution Environment (TEE).
- Performa RF sing Luar Biasa: Features an on-board antenna with up to 80m BLE/Wi-Fi range, and includes an interface for an external UFL antenna.
- Leveraging Power Consumption: Offers 4 working modes, with a low power consumption of 15 µA in deep sleep mode, and supports lithium battery charge management.
- Prosesor RISC-V Ganda: Incorporates two 32-bit RISC-V processors, with the high-performance processor running up to 160 MHz and the low-power processor up to 20 MHz.
- Classic XIAO Designs: Maintains the compact thumb-size form factor of 21 x 17.5mm and single-sided mount, ideal for space-limited projects.
Gambar 2.1: Swaraview of the Seeed Studio XIAO ESP32C6's main features, including connectivity, security, and processing power.
3. Instruksi persiyapan
Follow these steps to prepare your Seeed Studio XIAO ESP32C6 for use:
- Nyambung menyang Komputer: Use a USB-C cable to connect the XIAO ESP32C6 to your computer. The board will draw power from the USB connection.
- Instalasi driver: Depending on your operating system, you may need to install USB-to-serial drivers. Refer to the official Seeed Studio documentation for specific driver requirements and installation guides.
- Integrated Development Environment (IDE) Setup: Install a compatible IDE such as Arduino IDE or ESP-IDF. Configure the IDE to support the ESP32C6 board. Detailed instructions for IDE setup are available on the Seeed Studio wiki or Espressif documentation.
- Sumber Daya: The board can be powered via the USB-C port. For portable applications, it supports lithium battery charge management, allowing connection of a compatible Li-Po battery.
4. Instruksi Operasi
Operating the Seeed Studio XIAO ESP32C6 typically involves programming it with custom firmware. Here is a general workflow:
- Write Code: Develop your application code using C/C++ in your chosen IDE (e.g., Arduino IDE, ESP-IDF). Utilize the available libraries for Wi-Fi, Bluetooth, Zigbee, Thread, and other peripherals.
- Kompilasi: Compile your code within the IDE. This process translates your human-readable code into machine-executable instructions.
- Unggahan: Connect the XIAO ESP32C6 to your computer via USB-C. Select the correct serial port in your IDE and upload the compiled firmware to the board. The board may require entering bootloader mode by holding the BOOT button while connecting or resetting.
- Monitor Serial Output: Use the serial monitor in your IDE to view debug messages and interact with your program.
- Manajemen daya: The XIAO ESP32C6 supports various power modes. Implement deep sleep or light sleep modes in your code to optimize power consumption for battery-powered applications.
5. Diagram Pinout
Understanding the pinout is crucial for connecting external components and sensors to your XIAO ESP32C6. The board features a variety of digital, analog, and communication pins.
Image 5.1: Detailed pinout diagram for the Seeed Studio XIAO ESP32C6, illustrating GPIOs, power pins, and communication interfaces on both front and back sides.
Key pin functions include:
- Digital I/O (D0-D10): General Purpose Input/Output pins.
- Analog Inputs (A0-A2): Pins capable of reading analog sensor data.
- I2C, SPI, UART: Dedicated pins for common communication protocols.
- Pin daya: 3V3 (3.3V output), GND (Ground), VBUS (USB 5V input).
- Tombol BOOT: Used to enter bootloader mode for firmware uploading.
- Tombol RESET: Resets the microcontroller.
- BAT: Battery connection pads for Li-Po batteries.
6. Spesifikasi
| Fitur | Spesifikasi |
|---|---|
| Prosesor | Dual 32-bit RISC-V (High-performance up to 160 MHz, Low-power up to 20 MHz) |
| Konektivitas Nirkabel | 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), Zigbee, Thread (802.15.4) |
| Memori RAM Dipasang Ukuran | 0.5 MB |
| Kapasitas Panyimpenan Memori | 4096 KB (4MB) |
| Operasional Voltage | 3.3V (via USB-C or battery) |
| Mode Daya Sedheng | 15 µA in deep sleep mode |
| Antena | On-board antenna, UFL connector for external antenna |
| ukuran | 21 x 17.5 mm |
| Bobot | Kira-kira 1.76 ons (50 gram) |
| Antarmuka USB | USB Tipe-C |
7. Pangopènan
Proper maintenance ensures the longevity and reliable operation of your Seeed Studio XIAO ESP32C6:
- Nangani kanthi ati-ati: The board contains sensitive electronic components. Avoid dropping or subjecting it to physical shock.
- Tansah garing: Protect the board from moisture and liquids, which can cause short circuits and damage.
- Ngindhari Suhu Ekstrim: Operate and store the board within recommended temperature ranges. Extreme heat or cold can affect performance and component lifespan.
- Resik alon-alon: If cleaning is necessary, use a soft, dry brush or compressed air to remove dust. Avoid using liquids or abrasive materials.
- Discharge statis: Take precautions against electrostatic discharge (ESD) when handling the board, as ESD can damage sensitive components.
8. Ngatasi masalah
If you encounter issues with your XIAO ESP32C6, consider the following troubleshooting steps:
- Ora Daya/LED Mati:
- Priksa manawa kabel USB-C disambungake kanthi aman lan fungsional.
- Coba port USB utawa sumber daya liyane.
- If using a battery, verify it is charged and correctly connected.
- Kasalahan Unggahan:
- Verify that the correct board and serial port are selected in your IDE.
- Priksa manawa driver sing dibutuhake wis diinstal.
- Try manually entering bootloader mode by holding the BOOT button while connecting or resetting the board.
- Check your USB-C cable; some cables are for charging only and do not support data transfer.
- Connectivity Issues (Wi-Fi/Bluetooth/Zigbee/Thread):
- Review your code for correct initialization and configuration of wireless modules.
- Ensure your antenna (on-board or external) is properly connected and not obstructed.
- Priksa manawa ana gangguan saka piranti 2.4GHz liyane.
- Masalah Piranti Lunak/Firmware:
- Consult the official Seeed Studio documentation, forums, and community resources for known issues and solutions.
- Ensure your IDE and board support packages are up to date.
9. Warranty lan Dhukungan
The Seeed Studio XIAO ESP32C6 is covered by the manufacturer's standard warranty. For detailed warranty terms, technical support, and additional resources, please visit the official Seeed Studio website or contact their customer service. Online forums and community platforms are also valuable resources for project assistance and troubleshooting.
