Clover Fusible Bias Tape Maker 18mm (Model 4014) - Instruction Manual

Pambuka

The Clover Fusible Bias Tape Maker 18mm (Model 4014) is a specialized tool designed to simplify the creation of fusible bias tapes. This manual provides detailed instructions for its use, covering setup, operation, various crafting techniques, maintenance, and product specifications. With this tool, you can efficiently produce instant bias tapes for a variety of sewing and quilting projects, including Celtic quilt and meshwork designs.

Produk Overview

Komponen

• Clover Fusible Bias Tape Maker 18mm (Model 4014)
• Instruction Leaflet (included in packaging)

Ukuran kasedhiya

Clover Fusible Bias Tape Makers are available in various widths to suit different project needs. This manual specifically covers the 18mm model. Other available sizes include:

• 6mm (1/4 inci)
• 9mm (3/8 inci)
• 12mm (1/2 inci)
• 18mm (3/4 inci)
• 25mm (1 ​​inci)

Image: Clover Fusible Bias Tape Makers showing different available sizes.

Setup

Before beginning your project, ensure you have the following:

• Clover Fusible Bias Tape Maker (18mm)
• Fabric cut on the bias to the appropriate width (e.g., for 18mm tape, cut fabric strips wider to allow for folding)
• Clover Fusible Web (10mm width recommended for 18mm tape maker)
• Mini Iron or a standard iron with a fine tip
• Cutting mat and rotary cutter (optional, for precise fabric strips)
• Pin

Prepare your fabric strips by cutting them on the bias according to the desired finished width of your bias tape. For the 18mm tape maker, the fabric strip should be wider than 18mm to account for the folds.

Instruksi Operasi

General Use: Creating Fusible Bias Tape

1. Prepare Fabric and Fusible Web: Cut your fabric on the bias to the required width. For the 18mm tape maker, the fabric strip should be approximately 36mm (1.4 inches) wide. Cut a strip of Clover Fusible Web (10mm width is suitable) to the same length as your fabric strip.
2. Feed Fusible Web: Insert the fusible web into the upper groove of the bias tape maker.
3. Feed Fabric: Insert the fabric strip into the lower groove of the bias tape maker. Ensure the right side of the fabric is facing up.
4. Pull and Press: As you gently pull the bias tape maker, the fabric will fold inwards, encasing the fusible web. Use a mini iron to press the folded fabric immediately behind the tape maker. This activates the fusible web, creating a heat-adhesive bias tape.

Image: Fabric being fed through the Clover Fusible Bias Tape Maker.

Image: Using a mini iron to press the bias tape as it emerges from the maker.

Technique 1: Celtic Quilt

The Celtic Quilt technique uses fusible bias tape to create intricate, interwoven patterns. This is a form of appliqué using line patterns.

1. Prepare Bias Tape: Create fusible bias tape as described in the 'General Use' section.
2. Prepare Pattern: Place a Clover Design Sheet (or your own pattern) on your base fabric and secure it with pins.
3. Apply First Tape: Peel off the paper backing from your fusible bias tape. Carefully place the tape along the lines of your pattern. Use a mini iron to press and adhere the tape to the base fabric.
4. Interweave Tapes: For interwoven sections, gently lift the first tape where the second tape needs to pass underneath. Press the second tape into place, then press the first tape back down. Continue this process to create the interwoven design.
5. Secure Motifs: Once the design is complete, peel off the entire motif from the design sheet and place it onto your final base fabric. Press firmly with a mini iron to secure. For added durability, it is recommended to secure the motif with blind stitches.

Technique 2: Meshwork

Meshwork involves weaving strips of fusible bias tape to create a textured, basket-weave effect.

1. Prepare Bias Tapes: Create multiple strips of fusible bias tape using different fabrics if desired.
2. Siapke Base: Draw the desired lines for your meshwork pattern on the base fabric.
3. Place Vertical Tapes: Peel off the paper backing from several bias tape strips. Place these strips vertically along your drawn lines on the base fabric. Pin the top and bottom ends of each strip to prevent sliding.
4. Weave Horizontal Tapes: Take another bias tape strip. Weave it horizontally over and under the vertical tapes, alternating the weave with each row to create a checkerboard or mesh pattern.
5. Press to Adhere: Once the weaving is complete, use a mini iron to carefully press and glue all the woven tapes onto the base fabric. Pay close attention to detailed parts to ensure full adhesion.

Video Produk Resmi

Pangopènan

To ensure the longevity and optimal performance of your Clover Fusible Bias Tape Maker:

• Reresik: After each use, allow the tape maker to cool completely. Gently wipe any fabric residue or adhesive buildup from the grooves and surfaces using a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Panyimpenan: Store the tape maker in a clean, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.

Ngatasi masalah

• Tape not folding correctly: Ensure your fabric is cut precisely on the bias. The width of the fabric strip should be appropriate for the tape maker size (e.g., approximately double the finished tape width).
• Fusible web not adhering: Check that your iron is at the correct temperature for the fusible web you are using. Apply even pressure as you press. Ensure the fusible web is placed correctly within the fabric folds.
• Fabric jamming in the maker: Make sure the fabric edges are clean and free of fraying. Feed the fabric smoothly and avoid forcing it through the grooves.

Spesifikasi

Project Ideas

The Clover Fusible Bias Tape Maker opens up a world of creative possibilities. Here are some project ideas:

• Celtic Quilt Designs: Create intricate knotwork and appliqué patterns for quilts, bags, or decorative wall hangings.
• Meshwork Bags: Weave fabric strips into unique mesh patterns for stylish handbags and totes.
• Decorative Appliqué: Use bias tape to form flowers, leaves, or other shapes for embellishing garments, cushions, or home decor items.
• Border and Edging: Apply fusible bias tape as decorative borders or neat edgings on various fabric projects.

Gambar: Example of a finished project using the bias tape maker.

Warranty lan Dhukungan

Specific warranty details and direct support contact information are not provided in the product data. For warranty claims, technical support, or additional product information, please refer to the official Clover websitus utawa hubungi pengecer Panjenengan.