ANEX IQ Dasar Stroller
IQ ALL-IN-ONE
Lempitan pigura
FRAME IQ
Unfolding saka pigura
Masang saka gembong ngarep
Ngunci roda putar ngarep
Masang saka gembong mburi
Rem
Penyerapan kejut
Nangani angger-angger
Medhot / nyambungake basket blanja
Nggawa gagang
Imbuhan jembaré pigura
Unpacking saka carrycot
Lempitan saka carrycot
Unfolding saka carrycot
Lampiran kanggo pigura
Ventilasi
Penyesuaian hood Carrycot
Lampiran tutup Carrycot
Reresik Carrycot
Lampiran kanggo pigura
UNIT KURSI IQ
Lempitan pigura karo kursi
Pangaturan hood unit kursi
Pangaturan backrest unit kursi
Ventilasi saka sandaran kursi unit
Imbuhan footrest
Barrier keamanan unit kursi
Sabuk pengaman gesper
Pangaturan sabuk safety
Reresik unit kursi
Ngrakit Softgoods
Penyesuaian hood Buggy
Ventilasi saka backrest buggy kang
Imbuhan backrest Buggy kang 
Imbuhan footrest
Sabuk pengaman gesper
Pangaturan sabuk safety
Lempitan pigura karo buggy
Raincover kanggo carrycot / unit kursi
Priksa manual paling anyar ing kita websitus: anexbaby.com
Informasi bisa diganti tanpa kabar. Anex ora bakal tanggung jawab kanggo kesalahan teknis utawa ngilangi sing ana ing manual iki. Produk sing dituku bisa beda karo produk kaya sing diterangake ing manual iki.
AVALEX PTE. LTD.,
8 Eu Tong Sen Street # 17-88, Central
Office Tower 2, Singapore, 059818
+65 62215096
office@anexbaby.com
Dokumen / Sumber Daya
 | Stroller Dasar IQ |
Referensi
- Manual panggunamanual.tools
Dear Anex Team,
We are experiencing an issue with our Anex IQ stroller and would appreciate your assistance.
We have these height adapters that were previously attached to the frame, and we used them with the bassinet without any problems. After removing the bassinet, we installed the seat unit (stroller seat) without the adapters.
However, the height adapters are now stuck in the seat unit, and we are unable to remove them. We have tried pulling them out, but they do not come off.
Could you please advise how to safely remove these adapters? If possible, we would appreciate it if you could send us instructions or a guide.
We have attached photos for your reference.
Thank you in advance for your help.
Salam hormat,
Yuliya Tolkishevskaya
We are experiencing an issue with our Anex IQ stroller and would appreciate your assistance.
We have these height adapters that were previously attached to the frame, and we used them with the bassinet without any problems. After removing the bassinet, we installed the seat unit (stroller seat) without the adapters.
However, the height adapters are now stuck in the seat unit, and we are unable to remove them. We have tried pulling them out, but they do not come off.
Could you please advise how to safely remove these adapters? If possible, we would appreciate it if you could send us instructions or a guide.
We have attached photos for your reference.
Thank you in advance for your help.
Salam hormat,
Yuliya Tolkishevskaya
How do I remove the height adapters from the Anex IQ seat unit if they are stuck?
Removing height adapters from the Anex IQ seat unit typically requires engaging the release mechanism located on the adapters themselves or the seat unit's attachment points. If they are stuck, please try the following steps:
Ati-ati: Do not use excessive force or tools like pliers, as this may damage the plastic locking tabs. If the adapters remain stuck, it is recommended to contact Anex customer support directly at office@anexbaby.com or visit an authorized service center, as there may be a mechanical obstruction or a need for professional lubrication of the locking pins.
Read the full Q&A page