UNI-T UTS7000A Series Signal Analyzer Owner's Manual

Equipped with 11.6-inch 1920×1080 TFT LCD display
Macem-macem antarmuka: Keyboard, mouse, storage, upper computer, remote control, Web control, multi-device synchronization, demo monitoring, 3.5mm headphone jack, etc.

UTS7000A Series Signal Analyzer

Multi-Touch High-Definition Display

Equipped with an 11.6-inch multi-touch capacitive HD screen, the system supports intuitive gesture operations such as dragging, pinching, and zooming of traces through quick-access menus. This user-friendly human-machine interface streamlines workflows and reduces operational complexity.

Sensitivitas luar biasa

Detecting weak signals can be challenging due to interference from the instrument’s inherent noise floor. The UTS7000A series features a low displayed average noise level (DANL) of –167 dBm (typical), delivering exceptional sensitivity for reliable weak signal detection.

Great Phase Noise Performance

Engineered to meet demanding requirements in communication signal analysis, the UTS7000A achieves phase noise performance better than –110 dBc/Hz (typical) at a 10 kHz offset with a 1 GHz carrier, ensuring accurate and stable measurements.

High-Precision Amplitude Akurasi

The system delivers excellent amplitude measurement accuracy. For signals below 8 GHz, the typical amplitude accuracy is better than ±0.4 dB, enabling precise signal analysis across a wide frequency range.

Comprehensive Spectrum Analysis

The UTS7000A series offers an extensive set of spectrum parameter measurement functions, providing thorough and detailed signal analysis.

It supports two sweep modes: swept frequency and FFT. The number of sweep points is configurable from 200 to 100,001. In zero span mode, the sweep time ranges from 1 μs to 6,000 s.

Versatile Trace and Detection Modes

The instrument supports up to 6 traces, 10 markers, 7 detection modes, and 3 types of averaging. It also includes a wide range of marker measurement functions, such as NdB marker, noise marker, occupied bandwidth, power spectral density, and frequency counter.

It supports CISPR-compliant EMC testing, with preset frequency bands and built-in EMI average and quasi-peak detection capabilities.

Enhanced Selectivity

Delivers enhanced ability to resolve adjacent signals with significantly different amplitudes.

One-Touch Power Measurement Kit

Provides a suite of power and nonlinearity measurement functions, including occupied bandwidth, channel power, adjacent channel power, third-order intermodulation (TOI), spectrum monitoring, carrier-to-noise ratio (CNR), and other nonlinear distortion measurements.

Comprehensive Signal Analysis Capabilities

The UTS7000A offers a wide range of signal analysis functions: I/Q analysis, EMI pre-compliance testing, analog demodulation, vector signal analysis, real-time spectrum analysis, phase noise analysis, LTE, and 5G NR signal analysis.

5G NR Signal Analysis

The UTS7000A supports modulation analysis of both uplink and downlink signals compliant with 3GPP Release 15 through Release 18. It supports FDD and TDD duplexing modes and a variety of modulation formats, ranging from BPSK to 1024QAM.
The instrument enables one-click testing of standard Test Models and allows for customized parameter configuration and analysis. It displays key measurement results such as Error Vector Magnitude (EVM), frequency error, and power across different modulation types and signal conditions.

To facilitate in-depth analysis, the instrument offers multiple visualizations, including constellation diagrams and eye diagrams.

LTE Signal Analysis

The LTE signal analysis function enables modulation analysis of both uplink and downlink signals. It supports FDD and TDD duplexing modes and a variety of modulation formats, ranging from QPSK to 256QAM.

The instrument enables one-click Evolved Test Models (E-TM) and supports customized parameter configuration and analysis. It displays key measurement results such as Error Vector Magnitude (EVM), frequency error, and power across different modulation types and signal conditions.
To facilitate in-depth analysis, the instrument offers multiple visualizations, including constellation diagrams and eye diagrams.

Powerful Real-Time Spectrum Analysis

The real-time spectrum analysis function provides an ideal tool for testing time-varying signals such as burst, agile, and frequency-hopping signals. The real-time analysis bandwidth options include 40 MHz, 85 MHz, 160 MHz, and 255 MHz. The instrument achieves 100% frequency-domain signal capture in under 4.5 μs.

Vector Modulation Signal Analysis

The UTS7000A series signal analyzers provide comprehensive demodulation analysis capabilities.

They perform time-domain, frequency-domain, and modulation-domain analyses on digitally modulated signals, supporting a wide range of modulation types including PSK, FSK, QAM, and ASK.
These capabilities cover demodulation analysis of common single-carrier and single-phase digital modulation schemes.

Analog Demodulation

Provides AM, FM, and PM demodulation analysis.

EMI Pre-Compliance and Compliance Testing

Early electromagnetic interference (EMI) testing helps avoid delays in product launches. To ensure successful final EMI compliance, pre-compliance testing should be conducted during product development. Early identification of EMI issues allows for effective internal conduction and radiation emission testing, thereby shortening the overall testing cycle.

I/Q Analysis

Efficiently acquires and analyzes I/Q data for accurate signal characterization.

Phase Noise Analysis

One-click phase noise analysis enables fast and reliable phase noise measurement.

Spesifikasi Teknis

Spesifikasi describe the performance of the parameters covered by the product warranty in detail. Unless otherwise noted, these specifications apply to the temperature range of 20°C to 30°C.

Typical Value (Typ.) refers to additional product performance information that is not covered by the product warranty. When performance exceeds specifications, 80% of units can be demonstrated with a 95% confidence level over a temperature range of 20°C to 30°C. Typical values do not include measurement uncertainty.
Nominal Value (Nom.) indicates expected or approximate performance useful for product applications but is not covered by the product warranty.

The analyzer can meet its specifications under the following conditions.
The instrument should in a calibration cycle and has been warmed up for at least 30 minutes.
If the analyzer has been stored within the allowable storage temperature range but exceed the allowable operating temperature range, it must be placed within the allowable operating temperature range for at least two hours before powering on.

Comparison of Product Functions and Modes

Frekuensi lan Wektu

Frekuensi
Model	UTS7013A	UTS7026A	UTS7032A	UTS7040A
Rentang frekuensi	2 Hz nganti 13.6 GHz	2 Hz nganti 26.5 GHz	2 Hz nganti 32 GHz	2 Hz nganti 40 GHz
Pita frekuensi	LO multiple (N)
0	1	9 kHz nganti 3.0 GHz
1	2	3.0 GHz nganti 7.5 GHz
2	2	7.5 GHz nganti 9.5 GHz
3	2	9.5 GHz nganti 12.3 GHz
4	2	12.3 GHz nganti 15.5 GHz
5	4	15.5 GHz nganti 19.3 GHz
6	4	19.3 GHz nganti 21.0 GHz
7	4	21.0 GHz nganti 22.8 GHz
8	4	22.8 GHz nganti 26.5 GHz
9	8	26.5 GHz nganti 32.0 GHz
10	4	32.0 GHz nganti 36.0 GHz
11	8	36.0 GHz nganti 40.0 GHz

Amplitude

Range Dinamis

Advanced Measurement (Option)

Analog Demodulation (Option)

Vector Signal Analyzer (Option)

I/Q Analysis (Option)

Real-time Spectrum Analyzer

Analyze bandwidth (Options need to be factory configured)

LTE (Option)

5G NR (Option)

Phase Noise (Option)

Interface and Display

Spesifikasi Teknis Umum

Informasi Pesenan lan Periode Garansi

Pilihan pesenan lan instalasi

Purchase options: Based on your requirements, please purchase the specified function options from UNI-T Sales Personnel and provide the serial number of the instrument that needs the option installed.
Receive certificate: You will receive the license certificate based on the address provided in the order.
Register and obtain a license: Visit the UNI-T official websesi aktivasi lisensi situs kanggo registrasi. Gunakake kunci lisensi lan nomer seri instrumen sing kasedhiya ing sertifikat kanggo entuk kode lisensi lan lisensi pilihan file.
Install the option: Ngundhuh lisensi pilihan file to the root directory of a USB storage device and connect the USB storage device to the instrument. Once the USB storage device is recognized, the Option Install menu will be activated. Press this menu key to begin installing the option.

Warranty winates lan Tanggung Jawab

UNI-T njamin yen produk Instrumen bebas saka cacat materi lan pengerjaan sajrone telung taun saka tanggal tuku. Garansi iki ora ditrapake kanggo kerusakan sing disebabake dening kacilakan, kelalaian, penyalahgunaan, modifikasi, kontaminasi, utawa penanganan sing ora bener. Yen sampeyan butuh layanan garansi sajrone periode garansi, hubungi penjual sampeyan langsung. UNI-T ora bakal tanggung jawab kanggo karusakan utawa mundhut khusus, ora langsung, insidental, utawa sakteruse sing disebabake nggunakake piranti iki. Kanggo probe lan aksesoris, wektu babar pisan setaun. Dolan maring instrument.uni-trend.com kanggo informasi babar pisan lengkap.

Sinau luwih lengkap ing: www.uni-trend.com

Ndhaptar produk sampeyan kanggo konfirmasi kepemilikan sampeyan. Sampeyan uga bakal entuk kabar produk, tandha nganyari, tawaran eksklusif lan kabeh informasi paling anyar sing sampeyan kudu ngerti.UNI-T is the licensed trademark of UNI-TREND TECHNOLOGY (CHINA) CO., Ltd. UNI-T products are protected under patent laws in China and internationally, covering both granted and pending patents. Licensed software products are the property of UNI-Trend and its subsidiaries or suppliers, all rights reserved. This manual contains information that replaces all earlier published versions. The product information in this document is subject to update without notice. For more information on UNI-T Test & Measure Instrument products, applications, or service, please contact UNI-T instrument for support. The support center is available on www.uni-trend.com -> instruments.uni-trend.com.
https://instruments.uni-trend.com/ContactForm.

INFORMASI KONTAK

markas
UNI-TREND TECHNOLOGY (CHINA)
CO., Ltd.
alamat: No.6, Industrial North 1st Road, Songshan Lake Park, Kota Dongguan, Provinsi Guangdong, China
Telpon: (86-769) 8572 3888
Eropah
UNI-TREND TECHNOLOGY EU GmbH
alamat: Steinerne Furt 62, 86167 Augsburg, Germany
Telpon: +49 (0)821 8879980
Amerika Utara
UNI-TREND TECHNOLOGY US INC.
alamat: 2692 Gravel Drive, Building 5, Fort Worth, Texas 76118
Telpon: +1-888-668-8648

Pitakonan

Q: How do I adjust the noise level settings on the analyzer?

A: The noise level can be adjusted through the menu options on the device.

Q: What is the maximum frequency range of the UTS7000A Series Signal Analyzer?

A: The maximum frequency range is 40 GHz.

Dokumen / Sumber Daya

UNI-T UTS7000A Series Signal Analyzer [pdf] Manual Pamilik
UTS7000A, UTS7000A Series Signal Analyzer, UTS7000A Series, Signal Analyzer, Analyzer

Referensi

Manual pangguna

UNI-T UTS7000A Series Signal Analyzer

Spesifikasi

Fitur Produk