Model No.: SHD050C-1024600
Surenoo HDMI Tampilan Modul Series
Model No.: SHD050C-1024600
MANUAL PENGGUNA

SHD050C Surenoo HDMI Modul Tampilan

Mangga klik gambar ing ngisor iki kanggo tuku sample

MECARD:TEL:0086-17820607849;URL:http://www.surenoo.com; EMAIL:info@surenoo.com;N:Potter Hao;ORG:Surenoo Technology;	https://wa.me/qr/4GGOIDYZ2PXXN1
http://qr.kakao.com/talk/THom9tzJN5OMzvx1vTL1V.LvnEc-	https://line.me/ti/p/oas8BmVLVd
	https://u.wechat.com/EAK0B_l2YfPLwx3tRqiKkf4

Shenzhen Surenoo Technology Co.,Ltd.
www.surenoo.com
Link Referensi
Surenoo HDMI Tampilan Modul Pandhuan Pilihan

INFORMASI UMUM

Item informasi umum	Isine		Unit
Ukuran Layar LCD (Diagonal)	5.0		inch
Struktur Modul	Layar LCD + CTP Tutul + PCB		–
Tipe Tampilan LCD	TFT / TRANSMISI		–
Mode Tampilan LCD	TN: Normally White, IPS: Normally Black		–
Viewing Arah (Gray inversion)	Kabeh VIEW		jam
Ukuran modul (W × H × T)	121.31×95.47×13.93		mm
Area aktif (W × H)	108.00×64.80		mm
Jumlah piksel (Resolusi)	1024RGB × 600		Piksel
Jarak piksel (W×H)	0.1461×0.1462		mm
Atur Piksel Warna	Strip RGB		–
Tipe Antarmuka Modul	Layar LCD	HDMI antarmuka	–
	CTP Tutul	antarmuka USB GT911	–
Dhukungan Sistem	Win7/Win8/Win10 (Plug and play)		–
	Android/Linux (perlu dikonfigurasi dhisik)		–
Power Supply	USB (5.0V)		–
Konsumsi Daya Modul	2.3 (Maks)		W
Nomer Warna	16.7M		–
Jinis Lampu Latar	LED putih		–

DIMENSI EKSTERNAL

BETUL MAKSIMUM RATING

Parameter absolut ratings maksimum	Simbol	Min	Maks	Unit
Suhu operasi	Ndhuwur	-20	70	℃
Suhu panyimpenan	Tst	-30	80	℃
Kelembapan	RH	–	90% (Maks 60 ℃)	RH

Cathetan: Rating maksimum mutlak tegese produk bisa tahan jangka pendek, ora luwih saka 120 jam. Yen produk kasebut tahan suwe kanggo kahanan kasebut, umure bakal luwih cendhek.

LISTRIK CHARACTERISTICS(DC CHARACTERISTICS)

Parameter DC ciri	Simbol	Min.	Tipe.	Maks.	Unit
operasi PCB voltage	VUSB	–	5.0	–	V
LCD I/O operasi voltage	VDD	3.0	3.3	3.6	V
Input voltagtingkat 'H'	VIH	0.7 * VDD	–	VDD	V
Input voltagtingkat 'L'	VIL	VSS	–	0.3 * VDD	V
Output voltagtingkat 'H'	VOH	VDD-0.4	–	VDD	V
Output voltagtingkat 'L'	VOL	VSS	–	VSS+0.4	V

KARAKTERISTIK CTP

Item saka CTP ciri	Spesifikasi	Unit	Cathetan
Tipe Panel	Tutup Kaca + Sensor Kaca	–	–
Resolusi	1024 x 600	Piksel	–
Atose lumahing	≥6H	–	–
Transparansi	＞82%	–	–
IC Driver	GT911	–	–
Jinis Antarmuka	USB	–	–
Dhukungan Points	5	–	–
Sampling Rate	20~100	Hz	–
Pasokan voltage	3.3	V	–

KARAKTERISTIK ELEKTRO-OPTIK

Item elektro-optik ciri		Simbol	kahanan	Min.	Tipe.	Maks.	Unit	Cathetan	Cathetan
Wektu nanggepi		Tr+Tf	θ=0 =0 Ta=25 ℃	–	20	–	ms	GAMBAR 1.	4
Rasio Kontras		CR		–	350	–	–	GAMBAR 2.	1
Keseragaman luminance		PUTIH		–	80	–	%	GAMBAR 2.	3
Luminance lumahing		Lv		–	400	–	cd/m2	GAMBAR 2.	2
CIE (x, y) kromatisitas	Putih	Putih x	θ=0 = 0 Ta=25 ℃	–	0.317	–	–	GAMBAR 2.	5
		Putih y		–	0.324	–
	abang	Abang x		–	0.633	–
		Abang y		–	0.341	–
	Ijo	Ijo x		–	0.324	–
		Ijo y		–	0.551	–
	Biru	Biru x		–	0.153	–
		Biru lan		–	0.143	–
Viewing jangkoan amba	=90(12 jam)		CR  10	–	50	–	deg	GAMBAR 3.	6
	=270(6 jam)			–	60	–	deg
	=0(3 jam)			–	65	–	deg
	=180(9 jam)			–	65	–	deg
rasio NTSC	–		–	–	50	–	%	–	–

Cathetan 1. Contrast Ratio(CR) ditetepake kanthi matematis kanthi rumus ing ngisor iki. Kanggo informasi luwih lengkap, deleng FIG 2.:

Cathetan 2. Luminance lumahing yaiku lumahing LCD saka permukaan kanthi kabeh piksel nuduhake putih. Kanggo informasi luwih lengkap, deleng FIG 2.
Lv=Average Surface Luminance with all white pixels (P1,P2,P3,P4,P5,P6,P7,P8,P9
Cathetan 3. The uniformity in surface luminance（ WHITE）is determined by measuring luminance at each test position 1 through 9, and then dividing the maximum luminance of 9points luminance by minimum luminance of 9 points luminance. For more information see FIG 2. Cathetan 4. Response time is the time required for the display to transition from White to black(Rise Time, Tr) and from black to white(Decay Time, Tf). For additional information see FIG 1.
Cathetan 5. CIE (x, y) chromaticity ,The x,y value is determined by screen active area position 5.
Kanggo informasi luwih lengkap, deleng FIG 2.
Cathetan 6. ViewSudut ing yaiku sudut ing ngendi rasio kontras luwih gedhe tinimbang nilai tartamtu.
Kanggo modul TFT, nilai khusus rasio kontras yaiku 10. Sumbu ditemtokake kanggo sumbu horisontal utawa x lan sumbu vertikal utawa y babagan sumbu z sing normal ing lumahing LCD. Kanggo informasi luwih lengkap, deleng Gbr 3.
Cathetan 7. Kanggo ViewIng sudut lan wektu nanggepi testing, data testing adhedhasar Autronic-Melchers ConoScope. Instrumen seri. Kanggo rasio kontras, Lumahing Luminance, Luminance uniformity lan CIE, data testing adhedhasar detektor foto BM-7.
Cathetan 8. Kanggo modul transmissive TFT jinis TN, mbalikke skala abu-abu dumadi ing arah panel viewing amba
Gbr.1. Definisi Response Time Gbr.2. Cara pangukuran rasio kontras, luminance permukaan, keseragaman luminance, kromatisitas CIE (x , y)
A: H/6 ;
B: V/6 ;
H,V: ukuran Active Area(AA).
Instrumen pangukuran: BM-7; Ukuran titik cahya = 5mm, jarak 350mm saka lumahing LCD menyang lensa detektor. Gbr.3. Definisi saka viewing amba

TINDAKAN INTERFACE

A. HDMI Interface Description 20Pin-0.5mm-FPC (Connector)

PIN	Identifier	Deskripsi Fungsi
1	NC	Ngambang
2	RX0_N	Data transmission pin, used to transmit the differential data signal of channel 0
3	GND	Pin Tanah
4	RX0_P	Data transmission pin, used to transmit the differential data signal of channel 0
5	RX1_N	Data transmission pin, used to transmit the differential data signal of channel 1
6	GND	Pin Tanah
7	RX1_P	Data transmission pin, used to transmit the differential data signal of channel 1
8	RX2_N	Data transmission pin, used to transmit the differential data signal of channel 2
9	GND	Pin Tanah
10	RX2_P	Data transmission pin, used to transmit the differential data signal of channel 2
11	RXC_N	Clock transmission pin, used to transmit the differential clock signal
12	GND	Pin Tanah
13	RXC_P	Clock transmission pin, used to transmit the differential clock signal
14	NC	Ngambang
15	NC	Ngambang
16	HDMI SCL Kab	IIC clock line, which provides a clock signal for data transmission
17	HDMI SDA	IIC data line, used for actual data transmission
18	GND	Pin Tanah
19	HDMI 5V	Power pin, providing 5V power supply
20	HDMI HPD0	It is the hot-plug detection signal pin in the HDMI interface

B. USB Interface Description 4Pin-1.25mm Connector

PIN	Identifier	Deskripsi Fungsi
1	5.0V	Power pin, providing 5V power supply
2	D+	Data transmission pin, used to transmit differential data signals
3	D-	Data transmission pin, used to transmit differential data signals
4	GND	Lemah Daya

Cathetan Aplikasi: Please connect the USB first, and then connect the HDMI interface.

LCD WAKTU

Tabel Wektu input horisontal

Paramèter	Simbol	Nilai			Unit
		Min.	Tipe.	Maks.
Frekuensi DCLK@ Frame rate=60Hz	DCLK	44.9	51.2	63	MHz
Area tampilan horisontal	thd	1024			DCLK
1 Garis Horizontal	th	1200	1344	1400	DCLK
HSYNC lebar pulsa	thpw	1	–	140	DCLK
HSYNC Blanking	thb	160	160	160	DCLK
Emper ngarep HSYNC	thfp	16	160	216	DCLK
Vertikal tampilan wilayah	tvd	600			H
wektu VSYNC	tv	624	635	750	H
VSYNC jembaré pulsa	tvpw	1	–	20	H
VSYNC Blanking	tvb	23	23	23	H
VSYNC Teras Ngarep	tvfp	1	12	127	H

Tabel Wektu input vertikal

Paramèter	Simbol	Nilai			Unit
		Min.	Tipe.	Maks.
Frekuensi DCLK@ Frame rate=60Hz	DCLK	40.8	51.2	67.2	MHz
Area tampilan horisontal	thd	1024			DCLK
wektu HSYNC	th	1114	1344	1400	DCLK
HSYNC Blanking	thb + thfp	90	320	376	DCLK
Vertikal tampilan wilayah	tvd	600			H
wektu VSYNC	tv	610	635	800	H
VSYNC Blanking	tvb + tvfp	10	35	200	H

SYARAT-SYARAT TES LIYANE

Ora.	Item Tes	Kondisi Test
1	Panyimpenan Suhu Dhuwur	80 ℃ / 120 jam
2	Panyimpenan Suhu Kurang	-30 ℃ / 120 jam
3	Operasi Suhu Dhuwur	70 ℃ / 120 jam
4	Operasi Suhu Kurang	-20 ℃ / 120 jam
5	Panyimpenan Siklus Suhu	-20℃(30min.)~25(5min.)~70℃(30min.)×10cycles

A. Inspeksi sawise tes:

• Inspeksi sawise panyimpenan 2 ~ 4 jam ing suhu kamar, sampkudu bebas saka cacat:
• Gelembung udara ing LCD;
• Sealleak;
• Non-display;
• Segmen sing ilang;
• Kaca retak;
• Saiki luwih dhuwur kaping pindho saka nilai wiwitan.

B. Cathetan:

• Tes samples kudu Applied mung siji item test.
• Sample ukuran kanggo saben item test punika 5 ~ 10pcs.
• Kriteria Penghakiman Gagal: Spesifikasi Dasar, Karakteristik Listrik, Mekanik
• Karakteristik, Karakteristik Optik.

KRITERIA PEMERIKSAAN

specification iki digawe kanggo digunakake minangka standar acceptance / kritéria nolak kanggo produk modul TFT-LCD / IPS TFT-LCD, lan specification iki mung ditrapake ing cilik sing ukuran modul witjaksono utawa ngluwihi saka 3.5 inch.
10.1 Sampra rencana
Samprencana ling miturut GB/T2828.1-2003/ISO 2859-1:1999 lan ANSI/ASQC
Z1.4-1993, level normal 2 lan adhedhasar:
Cacat utama: AQL 0.65
Cacat cilik: AQL 1.5
10.2 Kawontenan inspeksi
ViewJarak kanggo inspeksi kosmetik kira-kira 30cm kanthi mripat kosong, lan ing lingkungan intensitas cahya 20 ~ 40W, kabeh arah kanggo mriksa s.ample should be within 45 against perpendicular line. (Normal temperature 20~25℃and normal humidity 60 15%RH )
10.3 Dhéfinisi Item Inspeksi.
A. Definisi zona inspeksi ing LCD. Zona A: karakter/Digit area
Zona B: viewing wilayah kajaba Zona A (Zona A + Zona B = minimal Viewarea ing)
Zona C: Njaba viewarea ing (wilayah sing ora katon sawise perakitan ing produk pelanggan)
Gambar 1 Zona inspeksi ing LCD
Cathetan: Minangka aturan umum, cacat visual ing Zona C diijini, nalika ora ana alangan kanggo kualitas lan perakitan produk pelanggan.
B. Definition of some visual defect

Titik padhang	Amarga kelangan fungsi kabeh utawa bagean, titik piksel ala katon padhang lan ukurane luwih saka 50% saka siji titik ing panel LCD ditampilake ing ngisor iki. pola ireng.
Titik peteng	Titik katon peteng lan ukurane ora owah ing panel LCD ditampilake ing ngisor gambar abang murni, ijo, biru, utawa gambar sing luwih putih murni.

10.4 Cacat utama

Item Ora.	Item sing arep dipriksa	Standar inspeksi	Klasifikasi saka cacat
1	Cacat fungsional	1) Ora ana tampilan 2) Tampilan ora normal 3) Missing verti cal, horizontal segment 4) Sirkuit cendhak 5) Konsumsi daya keluwihan 6) Lampu latar ora ana cahya, kelip-kelip lan cahya ora normal	utama
2	ilang	Komponen sing ilang
3	Ukuran garis	Sakabèhé njelaske nganggo bentuk garis dimensi ngluwihi drawing ora diijini

10.5 Cacat cilik

Item Ora.

Item sing arep dipriksa

Standar inspeksi

Klasifikasi saka cacat

1

Titik padhang / cacat titik peteng

Zona

Ditrima Qty

cilik

A+B

C

3.5”  ～7”

7～10.1”

＞10.1”

Titik piksel padhang

1

2

3

Ditrima

Titik piksel peteng

4

4

4

2 titik padhang jejer

0

0

0

2 titik peteng jejer

0

0

0

Total padhang lan peteng titik-titik

5

6

7

Cathetan: Jarak minimal antarane titik sing rusak luwih saka 5mm; Fungsi titik piksel normal, nanging titik-titik padhang sing disebabake dening materi manca lan alasan liyane diadili kanthi cacat titik 5.2.

2

Zona Ukuran (mm)

Ditrima Qty

cilik

A+B

C

3.5”～7”

7～10.1”

＞10.1”

Φ≤0.2

Ditrima

Ditrima

Ditrima

Ditrima

0.2＜Φ≤0.5

4

5

6

Φ＞0.5

0

0

0

Cathetan: 1.  Jarak minimal antarane titik sing rusak luwih saka 5 mm; 2.  Jumlah cacat nol ing kondisi operasi.

3

Cacat linear

Zona Ukuran (mm) Ditrima Qty A+B C dawa Jembar 3.5”～7” 7～10.1” ＞10.1” nggatekake W≤0.05 Ditrima Ditrima Ditrima Ditrima L≤5.0 0.05< W≤0.1 4 5 6 L＞5.0 W＞0.1 0 0 0

cilik

4	Cacat polarizer	5.4.1  Posisi Polarizer (i) Ngalih ing posisi ngirim ora ngluwihi dimensi outline kaca. (ii) Panutup sing ora lengkap viewarea ing amarga shifting ora diijini. 5.4.2  Reget ing polarizer Reget sing bisa diusap kanthi gampang kudu bisa ditampa. 5.4.3  Polarizer Dent & Gelembung Udara Zona Ukuran (mm) Ditrima Qty A+B C 3.5”～7” 7～10.1” ＞10.1” Φ≤0.2 Ditrima Ditrima Ditrima Ditrima 0.2＜Φ≤0.5 4 5 6 Φ＞0.5 0 0 0 5.4.4  Polarizer goresan (i) If the polarizer scratch can be seen after cover assembling or in the operating condition, judge by the linear defect of 5.3. (ii)If the polarizer scratch can be seen only in non-operating condition or some special angle, judge by the following:								cilik
			Zona Ukuran (mm)		Ditrima Qty
					A+B			C
			dawa	Jembar	3.5”～7”	7～10.1”	＞10.1”
			nggatekake	W≤0.05	Ditrima	Ditrima	Ditrima	Ditrima
			1.0<L ≤5.0	0.05< W≤0.20	4	5	6
			L＞5.0	W＞0.2	0	0	0
5	MURA	Nggunakake filter ND 3%, iku NG yen bisa dideleng ing gambar R,G,B.								cilik
	Putih/Ireng titik(MURA）	Visible under:ND3%；D≦0.15mm, Acceptable； 0.15mm<D≦0.5mm, N≦4；D>0.5mm, Not allowable.

6	Cacat kaca	(i) Retak Retak ora diijini.	cilik
		(ii) Kripik TFT ing sudhut X Y Z Ditrima ≤3.0 ≤3.0 Ora luwih saka ketebalan kaca N≤3 Kripik ing pojok terminal ora bakal diijini ngluwihi menyang pad ITO utawa mbukak segel perimeter.	cilik
		(iii) retak lumahing biasanipun X Y Z Ditrima ≤1.5 ≤1.5 Ora luwih saka ketebalan kaca N≤4 Iku mung ditrapake kanggo kaca ndhuwur LCD.	cilik

10.5 Kriteria Kosmetik Modul

Item Ora.	Item sing arep dipriksa	Standar Inspeksi	Klasifikasi saka cacat
1	Bedane ing Spec.	Ora diijini	Mayor
2	Pola peeling	Ora ana pola substrat peeling lan ngambang	Mayor
3	Cacat solder	Ora solder ilang	Mayor
		Ora ana jembatan solder	Mayor
		Ora solder kadhemen	cilik
4	Nolak cacat ing PCB	Foil tembaga sing katon (Φ0.5 mm utawa luwih) ing substrat pola ora diijini	cilik
5	driji emas FPC	Ora ana rereget, pecah, oksidasi mimpin kanggo ireng	Mayor
6	Bingkai plastik backlight	Ora ana deformasi, retak, pecah, kolom posisi lampu latar bejat, nick ketok.	cilik
7	Tandha efek printing	Ora ana tandha peteng, ora lengkap, deformasi nyebabake ora bisa ngadili	cilik
8	Akresi logam Urusan manca	Ora ana akresi zat asing logam (Ora ngluwihi Φ0.2mm)	cilik
9	noda	Ora ana noda kanggo ngrusak kosmetik	cilik
10	Piring discoloring	Ora ana piring sing luntur, karat lan ilang warna	cilik
10.5 Kriteria Kosmetik Modul 11	1. Bagean timbal	a. Soldering sisih PCB Solder kanggo mbentuk 'Filet' kabeh mimpin. Solder ngirim ora ndhelikake wangun timbal sampurna.	cilik
		b. Sisih Komponen (Ing kasus 'Liwat Lubang PCB') Solder kanggo nggayuh sisih Komponen PCB.	cilik
	2. Paket flat	Salah siji 'Toe'(A) utawa 'Seal'(B) saka timbal sing bakal ditutupi dening "Filet”. Wangun timbal kanggo nganggep liwat Solder.	cilik
	3. Kripik	(3/2) H ≥h ≥(1/2) H	cilik
	4. werni solder / solder cipratan	a. Jarak antarane werni solder lan konduktor utawa pad solder h ≥0.13 mm. Dhiameter werni solder d≤0.15 mm.	cilik
		b. Jumlah bal solder utawa splashes solder ora ngluwihi  5 ing 600 mm2.	cilik
		c. werni solder / solder splashes ora nglanggar reresik electrical minimal.	Mayor

www.surenoo.com

Dokumen / Sumber Daya

Surenoo Display SHD050C Surenoo HDMI Display Module [pdf] Manual pangguna SHD050C-1024600, SHD050C Surenoo HDMI Display Module, Surenoo HDMI Display Module, HDMI Display Module, Display Module, Module

Referensi

• Manual pangguna