PARADOX IPI80 Internet Module
Matur nuwun kanggo milih produk Sistem Keamanan Paradox. Manual ing ngisor iki nerangake sambungan lan program kanggo Modul Internet IP180. Kanggo komentar utawa saran, kirim email menyang manualsfeedback@paradox.com .
Pambuka
Modul Internet IP180 nyedhiyakake akses menyang sistem Paradox lan ngganti piranti pelapor IP150 sadurunge. IP180 duwe Wi-Fi sing dibangun, kit Antena Wi-Fi bisa dituku kanthi kapisah. IP180 mung nglaporake menyang panrima/konverter IPC10 Paradox, BabyWare, lan komunikasi karo aplikasi BlueEye. IP180 nggunakake sambungan sing diawasi sing dienkripsi karo PC IPC10 lan BlueEye, adhedhasar teknologi MQTT dadi stabil, cepet, lan dipercaya. IP180 bisa diupgrade saka jarak jauh saka InField lan aplikasi BlueEye. IP180 ndhukung kabeh panel Paradox + lan kudu digunakake karo panel Paradox sing paling akeh diprodhuksi sawise 2012.
Bab sing kudu sampeyan ngerti, BACA:
Nalika pemrograman IP180 padha karo IP150, ana sawetara beda sing sampeyan kudu ngerti:
- IP180 ora ndhukung mode "Kombo", ora ana output serial. Sistem karo sambungan combo ora bisa nganyari kanggo IP180 tanpa nganyarke panel kanggo + karo loro output serial.
- IP180, amarga sifate, ora bisa ndhukung jaringan tertutup lokal. Paradox bakal nawakake solusi lokal ing mangsa ngarep kanggo jaringan sing ditutup.
- For Beta testing, static IP is not supported.
- Laporan IP180 ing format ID Kontak mung menyang IPC10 (priksa manawa panel disetel kanggo nglaporake ID Kontak), lan saka IPC10 menyang CMS MLR2-DG utawa Ademco 685.
- IP180 Beta supports and supervises up to three IPC10 reporting receivers and upon release will support up to four receivers (IP150+ Future MQTT version supports only two receivers).
- Nalika IP180 disambungake, mung aplikasi BlueEye bakal nyambung; Insite Gold ora bakal nyambung menyang IP180.
- When connected to a + panel, it is recommended to connect the IP180 to Serial-1 (main channel) and PCS265 V8 (MQTT version) to Serial-2. It is not possible to mix MQTT reporting devices and previous reporting devices on the same panel.
FOR BETA:
If you upgraded/installed the IP180 and wish to revert to IP150, please see the “Reverting to Classic” section in this manual.
Programming of the IP180 can be only from a keypad and BabyWare. BlueEye can now configure emails, and upon beta completion all programming can be made from the BlueEye app as well.
CATETAN: IPC10 mung bisa nampa format ID KONTAK. Priksa manawa format laporan disetel menyang CID.
Sadurunge Sampeyan Miwiti
Priksa manawa sampeyan duwe ing ngisor iki kanggo ngatur Modul Internet IP180:
- 4-pin kabel serial (kalebu)
- Sambungan jaringan Ethernet utawa kanggo sambungan Wi-Fi, kredensial jaringan Wi-Fi, lan duwe kit antena Wi-Fi
- Aplikasi BlueEye diinstal ing smartphone sampeyan
IP180 liwatview
Instalasi
IP180
IP180 kudu diinstal ing pager kothak logam panel dadi tamper dilindhungi. Klip IP180 menyang ndhuwur kothak logam, kaya sing ditampilake ing Gambar 3.
Serial menyang Panel
Sambungake output serial saka IP180 menyang port Serial saka panel Paradox. Yen Paradox + Series, sambungake menyang Serial1 minangka saluran utama laporan, minangka ditampilake ing Figure 2. Yen panel powered munggah, LED ing Papan bakal padhang kanggo nunjukaké status IP180.
Ethernet
If you are using an Ethernet cable connection, connect it to an active Ethernet socket and the left side of the IP180, as shown in Figure 2. If you are using a Wi-Fi connection as well, you can configure the Wi-Fi via the application once ethernet is connected and the internet is available.
Wi-Fi
Kit Antena didol kanthi kapisah. Kanggo nggunakake wifi, pengeboran bolongan ¼" ing sisih ndhuwur utawa sisih kothak logam, pasang kabel ekstensi antena liwat bolongan kasebut lan aman soket menyang kothak logam. Amanake antena Wi-Fi menyang plug lan sambungake sisih liyane kabel alon-alon menyang IP180; nggunakake mekanisme "push lan klik", kaya sing ditampilake ing Gambar 4.
Cathetan: The Wi-Fi antenna is installed on the outside of the metal box and not inside the metal box. The antenna is not included and should be purchased separately from the distributor. To register into the Wi-Fi network without ethernet please open BlueEye.
Masang IP180 menyang Panel
In order to connect the IP180, plug in the Serial cable to panel, refer to Figure 2. After a few seconds, the RX/TX LED starts flashing; this indicates that the IP180 is powered and is communicating with the panel.
Indikator LED
| LED | Katrangan |
| SWAN-Q | ON - Disambungake menyang SWAN-Q (Ijo) |
| WiFiFi | ON – Disambungake menyang Wi-Fi (IJO) |
| Ethernet | ON – Disambungake menyang Ethernet (IJO 100mbps Oranye 10mbps,) |
| CMS1 | ON – CMS Receiver 1 (Main) configured successfully |
| CMS2 | ON – CMS Receiver 3 (Parallel) configured successfully |
| RX/TX | Flashing - Disambungake lan ijol-ijolan data karo panel |
Kanggo nyambungake IP180 liwat Ethernet
- Sambungake kabel Ethernet menyang IP180. LED ijo utawa kuning ing soket kudu murup sing nuduhake nyambungake menyang router. Ethernet LED ing IP180 bakal murup.
- Sawise nganti 15 detik, SWAN-Q LED bakal urip, nuduhake internet kasedhiya lan IP180 disambungake menyang SWAN-Q lan siap digunakake.
- Bukak BlueEye lan nyambung menyang situs nggunakake token situs utawa nomer serial panel.
To connect the IP180 over Wi-Fi with Blue Eye
Konfigurasi Wi-Fi uga kasedhiya saka menu Setelan Master ing BlueEye. Ana rong kemungkinan kanggo nyambung liwat Wi-Fi, nganggo utawa tanpa Ethernet.
Yen Ethernet disambungake:
- Nggunakake aplikasi BlueEye, nyambung menyang situs nggunakake token situs utawa nomer serial panel.
- Saka menu MASTER utawa INSTALLER, pilih setelan, banjur konfigurasi Wi-Fi.
- Pilih jaringan Wi-Fi sing pengin disambungake. Ketik sandhi banjur pencet sambung. Sambungan sing sukses bakal dituduhake kanthi nampilake CONNECTED.
Yen Ethernet ora nyambung:
- Daya IP180 liwat sambungan serial panel.
- Nggunakake Wi-Fi piranti, goleki hotspot Wi-Fi IP180 sing diidentifikasi nganggo IP180-SERIAL NUMBER.
- Nyambung menyang jeneng SSID: IP180 , ndeleng gambar ing ngisor iki.
- Pindhah menyang a web browser ing piranti lan ketik 192.168.180.1.
- Pilih saka dhaptar ing ndhuwur, jaringan Wi-Fi sing pengin disambungake banjur pencet. Ketik sandhi banjur pencet sambung. Yen ora perlu tembung sandhi (jaringan mbukak) kosongake banjur pencet sambung.
- Metu lan nerusake menyang BlueEye kanggo nyambung menyang situs.
Cathetan: If Ethernet and Wi-Fi are connected, the IP180 will keep one connection active but not both. The module will use the last active connection type.
Nggawe Situs
- Bukak aplikasi BlueEye.
- Pilih Menu, banjur pilih Menu Installer.
- Pencet menu 3 titik banjur pilih Gawe Situs Anyar.
- Ketik SN Panel, Jeneng Situs, lan alamat email.
- Tutul Gawe Situs Anyar.
- Situs digawe.
Configuring the IP180 Using BlueEye (for Beta only email can be configured)
Konfigurasi IP180 ing Situs sing Disambungake
- Bukak aplikasi BlueEye.
- Pilih Menu banjur Installer Menu; layar Dhaptar Situs Installer bakal ditampilake.
- Pilih Situs.
- Ketik kode sambungan Installer Remote (sadurunge disebut kode PC).
- Pilih pilihan Modules Programming dari tab Installer Services.
- Pilih Module Configuration.
- Pilih IP180.
CONFIGURATION (for Beta only from Keypad and BabyWare):
Nglaporake menyang IPC10 Receiver
Kanggo ngatur laporan, ketik ing panel Paradox liwat keypad, BabyWare, utawa aplikasi BlueEye, nomer akun CMS alamat IP panrima, Port IP, lan pro keamanan.file (nomer 2 digit) sing nuduhake wektu pengawasan. Nganti telung panrima bisa digunakake kanggo laporan karo IP180. Yen sampeyan lagi nglaporake menyang papat panrima, yen sampeyan nganyarke menyang IP180 utawa yen sampeyan nggunakake perangkat kukuh IP150+ MQTT, sampeyan ora bakal bisa ngatur maneh utawa nglaporake menyang panrima kaping papat.
Cathetan: Nomer akun 10 digit bakal didhukung ing panel EVOHD+, lan MG+/SP+ ing mangsa ngarep.
Keamanan Profiles
Keamanan profiles ora bisa diowahi.
| ID | Pengawasan |
| 01 | 1200 detik |
| 02 | 600 detik |
| 03 | 300 detik |
| 04 | 90 detik |
Nggawe Pelaporan IP ing Keypad utawa BabyWare
- CATETAN: IP180 mung bisa nglaporake format CID, priksa manawa laporan disetel menyang CID - (ID kontak Ademco)
- Contact ID: MG/SP: section [810] Enter value 04 (default)
EVO/EVOHD+: bagean [3070] Ketik nilai 05 - Ketik nomer akun pelaporan IP (siji kanggo saben partisi):
MG/SP: section [918] / [919] EVO: section [2976] to [2978] EVOHD+: section [2976] Receiver 1 Main / section [2978] Receiver 3 Parallel
Cathetan: Kanggo panel EVOHD+, Receiver 2 Backup kanthi otomatis nganggep nomer akun Receiver 1 Main lan ora bisa diowahi. - Ketik alamat IP stasiun pemantauan, port IP, lan pro keamananfile(s). Informasi iki kudu dipikolehi saka stasiun ngawasi.
| MG/SP bagean | |||
| Penerima IP | #1 | #2 | Gawe serep |
| IP Address 1 | [929] | [936] | [943] |
| IP Port 1 | [930] | [937] | [944] |
| IP Pro Kabfile | [934] | [941] | [948] |
| EVO bagean | |||
| Penerima IP | #1 | #2 | #3 |
| IP Address 1 | [2984] | [2986] | [2988] |
| IP Port 1 |  |
|
|
| IP Pro Kabfile |
| EVOHD+ bagean | |||
| Penerima IP | Utama | Gawe serep | Paralel |
| IP Address 1 | [2984] |
[2986] |
[2988] |
| IP Port 1 | |||
| IP Pro Kabfile | IP profile kanggo panrima iki padha karo panrima utama IP profile. | ||
| MG/SP Sending IP credentials to receiver | |||
| Penerima IP | #1 | #2 | Gawe serep |
| Save & send/Status | [935] | [942] | [949] |
| EVO Sending IP credentials to receiver | |||
| Penerima IP | Utama | Gawe serep | Paralel |
| Save& send/Status | [2985] | [2987] | [2989] |
Konfigurasi Email
Konfigurasi setelan server email IP180.
Alamat Email
Sampeyan bisa ngatur IP180 kanggo ngirim kabar email nganti papat alamat email kanggo nampa kabar acara sistem.
Kanggo ngatur alamat email:
- Aktifake tombol ngalih Alamat.
- Ketik alamat Email. Gunakake tombol test kanggo verifikasi manawa alamat panampa bener.
- Pilih grup Area lan Acara sing ngasilake kabar email.
CATETAN: Ketik jeneng pangguna tanpa @domain.
Nganyarke Firmware
- Nganyarke firmware kasedhiya saka aplikasi BlueEye nggunakake Menu installer, utawa piranti lunak Infield.
- Pilih situs saka dhaptar situs SWAN-Q.
- Ketik sandhi PC ing lapangan banjur pencet Sambungake.
- Pilih Modules Programming.
- Pilih Modul Updates.
- Pilih IP180.
- Press the key symbol on the top right side and enter the Beta keyword IP180B.
- Dhaptar perangkat kukuh sing kasedhiya bakal katon, pilih perangkat kukuh sing bakal digunakake.
Bali menyang Klasik (IP150)
- Copot IP180 saka port serial panel.
- Scan modul ing pemrograman panel.
- Ganti nganggo IP150/IP150+.
Reset IP180 menyang Setelan Default
Kanggo ngreset modul IP180 menyang setelan gawan, priksa manawa modul diuripake banjur lebokake pin / klip kertas straightened (utawa padha) menyang pinhole dumunung ing antarane loro CMS LED. Pencet mudhun alon-alon nganti sampeyan aran sawetara resistance; tahan nganti kurang luwih limang detik. Nalika RX / TX LED wiwit sumunar cepet, culake banjur pencet mudhun maneh kanggo rong detik. Ngenteni kabeh LED mateni banjur ON maneh.
Spesifikasi Teknis
Tabel ing ngisor iki nyedhiyakake spesifikasi teknis kanggo Modul Internet IP180.
| Spesifikasi | Katrangan |
| Ethernet | 100 Mbps / 10 Mbps |
| WiFiFi | 2.4 GHz, B, G, N |
| Kompatibilitas Panel | Panel kontrol paradoks diprodhuksi sawise 2012 |
| Nganyarke | Remotely via In Field or BlueEye app |
| Penerima IP | IPC10 nganti 3 panrima sing diawasi bebarengan |
| Enkripsi | AES 128-bit |
| IPC10 kanggo Format Output CMS | MLR2-DG utawa Ademco 685 |
| saiki Konsumsi | 100 mA |
| Operasi Suhu | -20c nganti +50c |
| Input Voltage | 10V kanggo 16.5 Vdc, diwenehake dening port serial panel |
| Enclosure ukuran | 10.9 x 2.7 x 2.2 cm (4.3 x 1.1 x 0.9 in) |
| Persetujuan | CE, EN 50136 ATS 5 Kelas II |
Garansi
Kanggo informasi babar pisan lengkap ing prodhuk iki, waca Pranyatan Warranty Limited ditemokaké ing Web situs www.paradox.com/Syarat. utawa hubungi distributor lokal. Spesifikasi bisa diganti tanpa kabar sadurunge.
Paten
Paten AS, Kanada lan internasional bisa uga ditrapake. Paradox minangka merek dagang utawa merek dagang kadhaptar saka Paradox Security Systems (Bahamas) Ltd. © 2023 Paradox Security Systems (Bahamas) Ltd. Kabeh hak dilindhungi undhang-undhang.
PARADOX.COM
Pitakonan sing Sering Ditakoni
Can I revert from IP180 to IP150?
Yes, you can revert to IP150 by following the steps mentioned in the Reverting to Classic section of the manual.
What reporting format does IPC10 support?
IPC10 can only receive CONTACT ID format. Make sure the reporting format is set to CID.
Dokumen / Sumber Daya
 |
PARADOX IPI80 Internet Module [pdf] Instruksi Manual IPI80 Internet Module, IPI80, Internet Module, Module |