Pandhuan Pangguna Jump Starter VTOMAN V3 Pro 2000A

1. Produk Liwatview

The VTOMAN V3 Pro is a portable and compact car battery jump starter designed to provide reliable power for various vehicles. It also functions as a power bank and an emergency LED light, making it a versatile tool for automotive and outdoor use.

Image: The VTOMAN V3 Pro jump starter unit with its smart jumper cables attached, ready for use.

1.1 Apa ing kothak

Image: A visual representation of all items included in the VTOMAN V3 Pro jump starter kit.

• 1 x VTOMAN V3 Pro Car Jump Starter
• 1 x Smart Jumper Kabel
• 1 x Kabel Pengisian USB Tipe-C
• 1 x Ngangkut Tas
• 1 x Manual pangguna

1.2 Diagram Produk

Image: A detailed diagram highlighting the various ports and features of the VTOMAN V3 Pro jump starter, including the power switch, electricity indicator, 12V jumper cable interface, LED flashlight, Type-C input port, USB output port, and integrated compass.

• Saklar Daya: Activates and deactivates the unit.
• Electricity Indicator: Nuduhake tingkat pangisian baterei saiki.
• 12V Jumper Cable Interface: Port kanggo nyambungake kabel jumper cerdas.
• Senter LED: Nyedhiyakake katerangan kanthi pirang-pirang mode.
• 5V/2A Type-C Input Port: Kanggo ngisi daya unit jump starter.
• 5V/2.1A USB Output Port: Kanggo ngisi daya piranti eksternal.
• Kompas Terpadu: Kanggo pitulungan navigasi.

2. Informasi Safety

Read all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

2.1 Pancegahan Safety Umum

• Aja mbabarake produk ing kahanan udan utawa udan.
• Do not operate the product if it has been damaged.
• Tetep adoh saka bocah-bocah.
• Pesthekake ventilasi sing tepat sajrone nggunakake lan ngisi daya.
• Do not short-circuit the jumper clamps.
• Tansah sambungake cl positif (+)amp to the positive (+) terminal and the negative (-) clamp menyang terminal negatif (-).
• Disconnect the jumper cables from the jump starter before disconnecting from the vehicle battery.

2.2 Intelligent Safety Protections

The VTOMAN V3 Pro is equipped with 10 intelligent safety protection technologies to ensure safe operation:

Image: An illustration detailing the 10 intelligent safety protections integrated into the VTOMAN V3 Pro jump starter, including over-charge, reverse-polarity, short-circuit, over-current, AI software, spark-proof, over-load, high and low-temperature, over-voltage, and reverse charge protection.

• Anti-Spark Protection: Prevents sparks during connection.
• Proteksi Pangisian Daya Mundur: Protects against current flowing back into the jump starter.
• Proteksi arus luwih: Safeguards marang aliran saiki gedhe banget.
• Proteksi overcharging: Nyegah kerusakan batere amarga ngisi daya sing berlebihan.
• Perlindhungan Polaritas Reverse: Alerts and protects against incorrect clamp sambungan.
• Perlindhungan Suhu Dhuwur: Mati yen suhu internal ngluwihi wates aman.
• Perlindhungan Suhu Sithik: Njamin operasi sing aman ing kahanan adhem.
• Proteksi sirkuit cendhak: Nyegah karusakan saka korsleting.
• Overvoltage Perlindungan: Nglindhungi saka voltase sing berlebihantage.
• Proteksi kakehan: Prevents damage from drawing too much power.

If the jumper cable indicator shows a red light, it indicates an incorrect connection or a safety issue. Correct the connection before proceeding.

3. Setup lan Ngisi daya

3.1 Ngisi daya wiwitan

Before first use, fully charge the VTOMAN V3 Pro jump starter. Use the provided Type-C USB cable and a compatible USB wall adapter (not included).

Image: The VTOMAN V3 Pro jump starter connected to a wall adapter via its Type-C USB cable for charging, illustrating the fast charging capability.

• Sambungake kabel Tipe-C menyang port input ing jump starter.
• Sambungake ujung kabel liyane menyang sumber daya USB.
• The electricity indicator lights will illuminate to show the charging progress.
• Pangisian daya lengkap mbutuhake kira-kira 2.6 jam.

4. Instruksi Operasi

4.1 Jump Starting a Vehicle (Standard Mode)

The VTOMAN V3 Pro can jump start 12V vehicles with up to 6L gasoline or 4L diesel engines. It can operate in temperatures from -4°F to 140°F.

Image: A three-step visual guide demonstrating how to jump start a car: 1. Insert jumper cables into the jump starter. 2. Connect clamps to the car battery (green light indicates correct connection). 3. Start the vehicle.

1. Priksa manawa jump starter wis diisi daya kanthi cukup.
2. Insert the smart jumper cable connector into the 12V jumper cable interface on the jump starter.
3. Sambungake ing abang (+) clamp to the vehicle's terminal batere positif (+).
4. Sambungake ing ireng (-) clamp to the vehicle's terminal baterei negatif (-).
5. Once connected, the smart cable indicator light should be ijo padhet, indicating a correct connection and readiness to jump start. If it's red, check connections.
6. Miwiti kendaraan sampeyan.
7. Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter.

4.2 Jump Starting a Completely Dead Battery (Boost Mode)

If the vehicle battery is completely dead, the smart cable indicator light may be off or flashing green. In this scenario, use the Boost mode.

Image: A four-step visual guide for using Boost Mode: 1. Insert jumper cables. 2. Connect clamps (flashing green light). 3. Press the 'BOOST' button on the smart cable. 4. Start the vehicle.

1. Follow steps 1-4 from Section 4.1.
2. If the smart cable indicator light is off or flashing green, press the "BOOST" button on the smart cable.
3. The indicator light should turn solid green.
4. Uripake kendharaan sampeyan sajrone 30 detik.
5. Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter.

4.3 Nggunakake minangka Power Bank

The V3 Pro features a 5V/2.1A USB output port to charge various mobile devices.

Image: The VTOMAN V3 Pro jump starter connected via USB to charge a smartphone, demonstrating its power bank functionality.

• Sambungake kabel pangisi daya USB piranti menyang port output USB ing jump starter.
• Starter lompat bakal kanthi otomatis miwiti ngisi daya piranti.

4.4 Using the LED Emergency Light

The integrated LED flashlight has three modes for various situations.

Image: The VTOMAN V3 Pro jump starter's LED flashlight illuminating a dark area, with icons indicating its three modes: normal, strobe, and SOS.

• Press and hold the power button for 3 seconds to turn on the LED light (Normal mode).
• Press the power button once to switch to Strobe mode.
• Pencet tombol daya maneh kanggo ngalih menyang mode SOS.
• Press the power button once more to turn off the light.

4.5 Fungsi Kompas

The V3 Pro includes an integrated compass for basic directional guidance during outdoor activities or emergencies.

5. Pangopènan lan Panyimpenan

Proper maintenance ensures the longevity and performance of your VTOMAN V3 Pro jump starter.

Image: An illustration depicting the 24-month standby time of the VTOMAN V3 Pro jump starter, highlighting its long-term charge retention.

• Ngisi daya: Recharge the unit every 3-6 months, even if not used, to maintain optimal battery health.
• Reresik: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasives.
• Panyimpenan: Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures. The unit has a 24-month ultra-long standby time and will automatically shut down after 30 seconds of inactivity to conserve power.
• Suhu: Avoid storing or operating in temperatures outside the recommended range (-4°F to 140°F).

6. Ngatasi masalah

If you encounter issues with your VTOMAN V3 Pro, refer to the following common problems and solutions.

7. Spesifikasi

Image: The VTOMAN V3 Pro jump starter held in a hand, illustrating its compact size and light weight (0.61 lbs), with dimensions of 5.95 x 3.15 x 1.15 inches.

8. Warranty lan Dhukungan

VTOMAN provides comprehensive support for its products.

• Garansi: Garansi 18 sasi wiwit tanggal tuku.
• Dhukungan Teknis: Dhukungan teknis umur kasedhiya.
• Kontak: For any after-sales questions or technical assistance, please contact VTOMAN customer service. Refer to the product packaging or official VTOMAN websitus kanggo rincian kontak.