Pambuka
This manual provides detailed instructions for the safe and efficient operation of your Longer Ray5 20000mW Laser Engraver with Air Assist Kit. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Informasi Safety
WARNING: Laser engravers are powerful tools that can cause serious injury if not used correctly. Always follow these safety guidelines:
- Tansah nganggo kacamata pengaman laser sing cocog nalika ngoperasikake mesin.
- Aja ndeleng langsung menyang sinar laser utawa pantulané.
- Priksa manawa area kerja duwe ventilasi sing apik kanggo ngilangi asap lan asap.
- Tansah bahan sing gampang kobong saka jalur laser.
- Aja ninggalake mesin tanpa pengawasan sajrone operasi.
- Priksa manawa mesin diselehake ing permukaan sing stabil lan rata.
- Supaya bocah lan pets adoh saka area operasi.
- Pedhot daya sadurunge nindakake pangopènan utawa pangaturan.
- Familiarize dhewe karo prosedur mati darurat.
Isi Paket
Priksa manawa kabeh komponen ana ing paket kasebut:
- Longer Ray5 20000mW Laser Engraver Unit
- Pompa Bantuan Udara
- Air Assist Nozzle and Tubing
- Adaptor Daya
- Kabel USB
- Kacamata Safety
- Manual pangguna (dokumen iki)
- Material Samples (may vary)
Image: Air assist kit components including the pump, nozzle, and tubing.
Setup
- Mbukak kemasan: Kasebut kanthi teliti, mbusak kabeh komponen saka packaging.
- Majelis: Follow the included quick start guide for assembling the main laser engraver frame and attaching the laser module.
- Air Assist Installation:
- Connect the air assist pump to the designated port on the laser module using the provided tubing.
- Ensure the air assist nozzle is securely attached to direct airflow to the engraving/cutting point.
- Sambungan daya: Sambungake adaptor daya menyang mesin ukir banjur menyang stopkontak sing cocog.
- Sambungan Komputer: Connect the engraver to your computer via USB, or prepare for Wi-Fi/TF card connection.
Image: The Longer Ray5 laser engraver with the air assist pump connected and ready for operation.
Instruksi Operasi
1. Piranti Lunak lan Konektivitas
The Longer Ray5 supports various software and connection methods:
- Piranti lunak sing kompatibel: LaserGRBL and LightBurn.
- Sistem Operasi: Supports Windows 7+, MacOS, and Linux.
- Cara Koneksi: Wi-Fi, USB, App, and TF card.
Image: Display showing the Longer Ray5's compatibility with LaserGRBL and LightBurn software, and various connection options including Wi-Fi, USB, App, and TF card across Windows, MacOS, and Linux operating systems.
2. Engraving and Cutting Capabilities
The 20W diode laser offers high-efficiency performance for various materials.
- nglereni: Capable of cutting up to 25mm of wood and 35mm of acrylic. It can also cut 0.05mm metal.
- Ukiran: Engrave hundreds of colors on metallic steel and a wide range of other materials.
- Bahan: Acrylic, metal, wood, stainless steel, and more.
Image: Illustration demonstrating the 20W diode laser's capability to cut 25mm wood and 35mm acrylic.
Gambar: Examples of engraving capabilities, showcasing over 380 colors on metallic surfaces and other DIY artworks.
Image: A collection of various items demonstrating the versatile material selection for engraving and cutting, including wood, metal, and acrylic.
3. Fungsi Bantuan Udara
The integrated air assist kit significantly improves cutting and engraving quality.
- Enhanced Cutting: The adjustable airflow (10-30L/min) suppresses smoke and dust, preventing laser energy attenuation and ensuring cleaner, smoother edges.
- Reduced Yellowing: Air assist helps prevent charring and yellowing on materials during laser processing, especially for wood and acrylic.
Image: A visual comparison showing the benefits of air assist, resulting in cleaner cuts and reduced processing time (e.g., 12 minutes with air assist vs. 20 minutes without).
4. Operasi Terus-terusan
The Longer Ray5 is designed for powerful continuous working capacity, supporting 24/7 continuous engraving. A single computer can control multiple machines.
Image: Depiction of multiple Longer Ray5 machines working simultaneously, illustrating continuous operation and the ability for one computer to control several units.
Pangopènan
Pangopènan rutin njamin kinerja sing optimal lan ndawakake umur mesin ukir laser sampeyan.
- Ngresiki Lensa Laser: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam quality.
- Puing bening: Remove any accumulated dust or debris from the work area and machine components.
- Priksa Sabuk lan Rel: Inspect drive belts for tension and wear. Keep linear rails clean and lubricated as per manufacturer recommendations.
- Air Assist Filter: If your air assist pump has a filter, clean or replace it regularly to ensure efficient airflow.
- Nganyari Firmware: Priksa pabrikan websitus kanggo nganyari perangkat kukuh sing kasedhiya kanggo nambah kinerja utawa nambah fitur.
Ngatasi masalah
Bagean iki alamat masalah umum sampeyan bisa nemoni.
| Masalah | Kemungkinan Penyebab | Solusi |
|---|---|---|
| Laser ora murub | Power not connected, software error, laser module fault. | Check power connections. Verify software settings. Contact support if laser module is suspected faulty. |
| Kualitas ukiran/potongan sing kurang apik | Incorrect focus, dirty lens, wrong power/speed settings, material issues, no air assist. | Adjust laser focus. Clean the laser lens. Optimize power/speed settings for the material. Ensure air assist is active. |
| Mesin ora nyambung menyang komputer | USB cable issue, driver not installed, Wi-Fi configuration error. | Try a different USB port/cable. Install necessary drivers. Reconfigure Wi-Fi connection. |
| Asap/kebul sing akeh banget | Insufficient ventilation, air assist not active or weak. | Ensure proper ventilation. Check air assist pump and tubing for blockages. Increase air assist flow. |
Spesifikasi
| Fitur | Rincian |
|---|---|
| Nomer Model | RAY5 |
| Daya Output Laser | 20000mW (20W) |
| Tipe Laser | Laser Diode |
| Kedalaman Pemotongan (Kayu) | Nganti 25 mm |
| Cutting Depth (Acrylic) | Nganti 35 mm |
| Metal Cutting Capability | 0.05 mm |
| Air Assist Flow | 10-30 L/min (Adjustable) |
| Layar tutul | 3.5 ing |
| Konektivitas | Wi-Fi, USB, App, TF Card |
| Piranti Lunak sing Kompatibel | LaserGRBL, LightBurn |
| Didhukung OS | Windows 7+, MacOS, Linux |
| Produsen | Luwih dawa |
| Tanggal Kapisan Kasedhiya | 1 Agustus 2024 |
Warranty lan Dhukungan
For warranty information and technical support, please refer to the official Longer websitus utawa hubungi layanan pelanggan langsung. Simpen kuitansi tuku minangka bukti tuku kanggo klaim garansi.
Sumber Daya Online: Dolan maring Longer Store on Amazon kanggo informasi produk tambahan lan dhukungan.