COMPUTHERM E280

Pandhuan Pangguna Termostat Wi-Fi Computherm E280 nganggo Sensor Lantai

Model: E280 | Brand: COMPUTHERM

Pambuka

The COMPUTHERM E280 Wi-Fi Thermostat allows you to control connected heating or cooling devices, such as boilers or air conditioning systems, via your smartphone or tablet over the internet. This thermostat is compatible with any two-wire thermostatic connector and supports both 24V and 230V control circuits. It is particularly useful for managing heating/cooling in homes, apartments, or holiday residences, especially when occupancy schedules are irregular.

Equipped with a connectable floor temperature sensor, the E280 is ideal for controlling underfloor heating systems. It features two potential-free relays that can operate simultaneously, allowing independent control of two devices. This enables the thermostat to manage a pump and a zone valve in addition to the main boiler, facilitating multi-zone heating systems without requiring a separate zone control system.

Computherm E280 Wi-Fi Thermostat and smartphone app interface

Image: The Computherm E280 Wi-Fi Thermostat displaying room temperature and set temperature, alongside a smartphone showing the thermostat's control application.

Isi Paket

Sawise mbukak paket kasebut, priksa manawa kabeh komponen ana lan ora rusak.

  • Computherm E280 Wi-Fi Thermostat unit
  • Sensor suhu lantai
  • Pasang sekrup lan colokan tembok
  • Manual pangguna (dokumen iki)
Contents of the Computherm E280 package including thermostat, floor sensor, and manuals

Image: The Computherm E280 thermostat, its floor sensor, mounting hardware, and printed user manuals as found in the product packaging.

Setup lan Instalasi

penting: Installation should only be performed by a qualified electrician or heating engineer. Ensure the main power supply is disconnected before commencing any wiring.

1. Pemasangan Termostat

  1. Choose a suitable location on an interior wall, away from direct sunlight, drafts, or heat sources, at approximately 1.5 meters (5 feet) from the floor.
  2. Carefully separate the front panel from the backplate of the thermostat.
  3. Mark the drilling points on the wall using the backplate as a template.
  4. Drill holes, insert wall plugs, and secure the backplate to the wall using the provided screws.

2. Sambungan Wiring

The Computherm E280 features two potential-free relays (K1 and K2) for controlling heating/cooling systems and an optional floor sensor.

Wiring diagram on the back of the Computherm E280 thermostat showing terminals for power, relays K1 and K2, and floor sensor

Gambar: mburi view of the Computherm E280 thermostat, detailing the terminal block for electrical connections, including power input, relay outputs (K1 and K2), and the floor sensor input.

  • Power Supply (L, N): Connect the live (L) and neutral (N) wires of your 230V AC power supply.
  • Relay K1 (COM, NO, NC): This relay is typically used for controlling the main heating/cooling device (e.g., boiler).
    • COM: Common terminal.
    • NO: Normally Open (connect to this for heating applications where the circuit closes to activate).
    • NC: Normally Closed (connect to this for cooling applications where the circuit opens to activate).
  • Relay K2 (COM, NO): This relay can be used for an auxiliary device, such as a pump or zone valve.
    • COM: Common terminal.
    • NO: Biasane mbukak.
  • Sensor Lantai: Connect the wires from the external floor temperature sensor to the designated terminals.

3. Rapat pungkasan

  1. Once wiring is complete and secure, carefully reattach the front panel of the thermostat to the backplate.
  2. Restore power to the system. The thermostat display should illuminate.

Instruksi Operasi

The Computherm E280 can be operated directly via its touch buttons or remotely via the dedicated smartphone application.

1. Daya Awal lan Koneksi Wi-Fi

  1. After power-on, the thermostat will display the current room temperature and default settings.
  2. Download the "Computherm" or "Smart Life" app from your smartphone's app store (iOS or Android).
  3. Follow the in-app instructions to add a new device and connect your E280 thermostat to your 2.4 GHz Wi-Fi network. This typically involves putting the thermostat into pairing mode (refer to the app or thermostat's quick start guide for specific button presses).

2. Basic Thermostat Functions (On-Device)

Close-up of Computherm E280 thermostat display and control buttons

Gambar: A rinci view of the Computherm E280 thermostat's digital display, showing current room temperature, set temperature, day, and time, along with the touch-sensitive control buttons below the screen.

  • Tombol Daya (): Press to turn the thermostat on or off.
  • Tombol Mode (): Cycle through operating modes (e.g., Heating, Cooling, Auto, Manual).
  • Set Button (): Access settings or programming menus.
  • Panah Munggah/Mudhun ( / ): Adjust temperature setpoints or navigate menu options.

3. Kontrol Jarak Jauh liwat Aplikasi Smartphone

The smartphone app provides comprehensive control and monitoring capabilities:

Smartphone app showing advanced settings for Computherm E280 thermostat

Image: A smartphone screen displaying the advanced settings interface of the Computherm E280 thermostat app, showing options like sensor mode, temperature differentials, and antifreeze settings.

  • Pangaturan suhu: Easily change the set temperature from anywhere.
  • Jadwal: Create and modify weekly heating/cooling schedules.
  • Pilihan Mode: Switch between heating, cooling, and manual modes.
  • Setelan Lanjut: Configure parameters such as temperature calibration, switching sensitivity, floor sensor limits, and antifreeze protection.
  • ngawasi: View current room and floor temperatures, operating status, and historical data.

Pangopènan

The Computherm E280 thermostat requires minimal maintenance to ensure optimal performance.

  • Reresik: Wipe the thermostat's display and casing with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the surface or internal components.
  • Priksa Sensor: Periodically ensure that the internal and external (floor) temperature sensors are free from obstructions or debris that could affect accurate readings.
  • Nganyari piranti lunak: Keep the smartphone application updated to the latest version to benefit from new features and performance improvements. The thermostat's firmware may also receive updates via the app.

Ngatasi masalah

If you encounter issues with your Computherm E280 thermostat, refer to the following common problems and solutions:

MasalahKemungkinan PenyebabSolusi
Tampilan termostat kosong.Ora ana sumber daya.Priksa pemutus sirkuit lan sambungan kabel. Priksa manawa listrik wis pulih.
Ora bisa nyambung menyang Wi-Fi.Tembung sandhi Wi-Fi salah, jaringan 5GHz, utawa sinyal lemah.Verify Wi-Fi password. Ensure you are connecting to a 2.4 GHz network. Move thermostat closer to router or use a Wi-Fi extender. Restart thermostat and router.
Sistem pemanas/pendingin ora nanggapi.Incorrect wiring, system turned off, or thermostat in wrong mode.Check wiring connections (refer to Setup section). Ensure heating/cooling system is powered on. Verify thermostat is in the correct operating mode (e.g., Heating).
Wacan suhu sing ora akurat.Sensor obstruction, thermostat location, or calibration issue.Ensure sensors are clear. Relocate thermostat if exposed to drafts/direct sunlight. Check app for temperature calibration options.

If the problem persists, please contact Computherm customer support.

Spesifikasi

FiturRincian
MerkKOMPUTER
Nomer ModelE280
warnaPutih
BahanPlastik
Ukuran produk (L x W x H)1.7 x 8.6 x 8.6 cm
Bobot Barang370g wuh
Voltage240 Volts AC (max. 24V DC / 240V AC for relays)
Sumber DayaKabel Listrik Kab
Teknologi KonektivitasWi-Fi (b/g/n) 2.4 GHz
Temperature Measurement Range (Internal)0 °C - 50 °C (0.1 °C increments)
Temperature Measurement Range (Floor Sensor)0 °C - 99 °C (0.1 °C increments)
Akurasi Pangukuran Suhu± 0.5 °C
Rentang Suhu sing bisa diatur5 °C - 99 °C (0.5 °C increments)
Sensitivitas Ngalih± 0.1 °C to ± 1.0 °C (0.1 °C increments)
Switchable Current (K1)8A (2A inductive load)
Switchable Current (K2)3A (1A inductive load)
Heat Sensor Type (Internal & Floor)NTC 3950K 10kΩ at 25°C
Fitur KhususProgrammable, Wi-Fi Control, Floor Sensor Included
Panggunaan tartamtuRadiator, Underfloor Heating

Warranty lan Dhukungan

The Computherm E280 Wi-Fi Thermostat comes with a garansi 2 taun saka tanggal tuku. Garansi iki nyakup cacat manufaktur lan malfungsi ing panggunaan normal. Mangga nyimpen bukti tuku kanggo claims babar pisan.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or visit the official Computherm websitus kanggo informasi kontak.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.