HANSSHOW Tesla Head Up Display (Model HUD Screen-9") Instruction Manual

1. Produk Liwatview

The HANSSHOW Tesla Head Up Display is a 9-inch IPS touch screen designed to integrate seamlessly into Tesla Model 3 and Model Y vehicles. It provides essential driving information, supports wireless CarPlay and Android Auto, and offers various control methods including original car steering wheel buttons and touch screen input. This display is compatible with both AMD and Intel versions of the Tesla infotainment processor.

Figure 1: HANSSHOW Head Up Display integrated into a Tesla dashboard.

2. Apa ing Box

Upon unboxing your HANSSHOW Head Up Display, you should find the following components:

• 9-inch IPS Touch Screen Display: The main unit for displaying information and interaction.
• Wiring Harness: Includes specific harnesses for Intel Atom CPU and AMD Ryzen CPU versions of Tesla vehicles.
• Plastic Pry Bar: For safely removing interior trim pieces during installation.
• Metal Backing Plate: Used for securing the display to the dashboard vents.
• Six Screws: For attaching the backing plate to the display and dashboard.
• Panduan Operasi: A printed manual detailing device usage (installation guide available online).

Gambar 2: Kabeh komponen sing kalebu ing kemasan produk.

3. Spesifikasi

• Ukuran Layar: 9 ing
• Resolusi: 1920 x 720
• Tipe tampilan: Layar tutul IPS
• Konektivitas: USB, Bluetooth, WiFi
• Piranti sing kompatibel: Mobile Phone (for CarPlay/Android Auto)
• Fitur sing Didhukung: Wireless CarPlay, Wireless/Wired Android Auto, CarLife
• Sistem Operasi: sistem Linux
• Fitur khusus: Blue-light filtering technology, Day/Night modes, Steering wheel button control, Voice control (Mandarin Chinese only)
• Bobot barang: 2.86 kab
• Ukuran Paket: 10.79 x 5.87 x 4.61 inci

4. Persiyapan lan Instalasi

Proper installation is crucial for the optimal performance of your HANSSHOW Head Up Display. Please follow these steps carefully. It is recommended to watch the official installation video for visual guidance.

4.1 Identify Your Tesla's CPU Type

The wiring harness required depends on your Tesla's infotainment processor (CPU). To identify your CPU:

1. On your Tesla's main screen, navigate to Controls > Software.
2. Tutul Informasi kendaraan tambahan (usually in blue letters).
3. Goleki Infotainment Processor to see if it's Intel Atom Kab or AMD Ryzen Kab.

4.2 Power Down Your Tesla

Before beginning any electrical work, it is essential to power down your vehicle:

1. Open all car doors and pop the hood (frunk).
2. On your Tesla's main screen, navigate to Controls > Safety.
3. Tutul Power Off. Confirm the power off.
4. Wait approximately 15 minutes until you hear a distinct click sound, indicating the car is fully powered down.
5. In the frunk, use a 10mm socket wrench to loosen and remove the negative terminal cable from the 12V battery. Secure the cable away from any metal objects.
6. For Model 3, lift the rear seat cushion to access and disconnect the high-voltage konektor.

4.3 Dashboard Disassembly

Carefully remove the dashboard trim pieces using the provided plastic pry bar:

1. Remove the side trim pieces on both the driver and passenger sides of the dashboard.
2. Gently lift the front edge of the dashboard panel to release it from its clips. Do this on both sides.
3. Angle the dashboard upwards and carefully lift the entire panel out.
4. On the passenger side, remove the panel underneath the glove box by popping out its five trim clips. Disconnect the two wires for the speaker and footwell light.
5. Remove the long trim piece that runs from the dash down along the door sill.

4.4 Sambungan Wiring

Connect the appropriate wiring harness based on your CPU type:

1. Locate the main wiring harness connector behind the passenger side dashboard. This is typically the second plug from the right, next to the inside wall.
2. Carefully disconnect the existing car harness.
3. Connect the female end of the provided Y-harness to the car's original connector.
4. Connect the male end of the Y-harness to the now-empty port on the car.
5. For AMD Ryzen CPUs, run the additional power cable (red and black wires) through the car's front firewall and connect it to the 12V battery in the frunk.
6. Route the red and blue wires from the display through the dashboard vent holes. Use painter's tape to mark the 25th vent hole (for the left tab) and the 32nd vent hole (for the blue wire).
7. Insert the display's left-most tab into the marked 25th vent hole and push the display all the way in. Ensure wires are not pinched.
8. Attach the metal backing plate to the underside of the dashboard, aligning the holes with the display tabs. Insert and tighten the six screws.

4.5 Reassembly

Reassemble the dashboard and trim pieces in reverse order of disassembly. Ensure all connections are secure and wires are neatly tucked away to prevent rattling.

5. Instruksi Operasi

Your HANSSHOW Head Up Display offers intuitive controls and various display modes.

5.1 Mode Tampilan lan Padhange

• The display supports Day and Night modes for optimal visibility in different lighting conditions.
• Brightness is automatically adjusted based on the main Tesla screen's brightness settings.
• The display features blue-light filtering technology to reduce eye strain during prolonged use.

Figure 3: Day and Night modes of the display, showing clear visibility in different lighting.

5.2 Smartphone Connection (CarPlay/Android Auto)

To connect your smartphone for wireless CarPlay or Android Auto:

1. In the system settings menu, choose your desired connection type: CarPlay, Display Mode (Normal or Full Screen).
2. On your smartphone, search for the Bluetooth ID BT-LINK lan nyambung menyang piranti.
3. After approximately 10 seconds, your smartphone will prompt you to confirm using CarPlay/Android Auto.
4. Klik Konfirmasi. CarPlay/Android Auto will automatically connect.

Figure 4: Smartphone connection guide for wireless CarPlay and Android Auto.

5.3 Metode Kontrol

• Original Car Steering Wheel Buttons: The display supports linkage adjustment and individual adjustment of the original car's steering wheel controls.
• Kontrol Layar Tutul: Directly interact with the 9-inch IPS touch screen.
• Kontrol swara: Supports Mandarin Chinese voice commands.

6. Pangopènan

To ensure the longevity and optimal performance of your Head Up Display:

• Regularly clean the screen with a soft, lint-free cloth. Avoid harsh chemicals.
• Priksa manawa kabeh sambungan kabel tetep aman.
• Aja nganti piranti kasebut kena suhu ekstrem utawa sinar srengenge langsung sajrone wektu sing suwe.

7. Ngatasi masalah

If you encounter issues with your HANSSHOW Head Up Display, consider the following:

• Layar Ora Nyala: Verify all power connections are secure and the car's 12V battery is properly reconnected. Ensure the car was fully powered down and restarted correctly.
• Masalah Koneksi CarPlay/Android Auto: Double-check Bluetooth pairing and ensure the correct connection type is selected in the display's settings. Try restarting both the display (by powering off/on the car) and your smartphone.
• Swara kriting: Ensure all wires are securely tucked away and not pinched. Use electrical tape or zip ties to secure loose wires if necessary.
• Screen Freezing/Restarting: This could indicate a software or power issue. Ensure all connections are firm. If the issue persists, check for available firmware updates.

8. Nganyari Firmware

Firmware updates can be applied via the USB-C port on the side of the display. Visit the HANSSHOW websitus web kanggo firmware paling anyar lan pandhuan babagan cara nganyari piranti sampeyan.

9. Warranty lan Dhukungan

For any installation questions or technical support, please refer to the QR code provided on the product packaging or contact HANSSHOW customer service via Amazon email or WhatsApp at +86 156 2278 2181.

Figure 5: QR code for installation video and support contact details.