Saooer Solar Charge Controller 40A 12V/24V

1. Pambuka

Thank you for choosing the Saooer Solar Charge Controller 40A 12V/24V. This intelligent regulator is designed to manage the power flow from your solar panels to your battery bank, ensuring efficient charging and protecting your battery from overcharge and over-discharge. This manual provides essential information for the safe and effective installation, operation, and maintenance of your solar charge controller.

2. Informasi Safety

Mangga wacanen kabeh pandhuan kanthi teliti sadurunge instalasi lan operasi.

• Priksa manawa kabeh sambungan wis bener lan aman sadurunge nggunakake daya.
• Aja nyoba mbongkar utawa ndandani controller dhewe. Hubungi personel qualified kanggo layanan.
• Pasang pengontrol ing wilayah sing duwe ventilasi sing apik, adoh saka bahan sing gampang kobong lan sinar srengenge langsung.
• Sambungake batere dhisik, banjur panel surya, lan pungkasane beban. Pedhot sambungan kanthi urutan walik.
• The controller is equipped with multiple protection functions including short-circuit protection, open-circuit protection, and reverse polarity protection. However, incorrect wiring can still cause damage.
• Gunakake ukuran kabel sing cocog kanggo kabeh sambungan supaya ora panas banget.

3. Produk Liwatview

The Saooer Solar Charge Controller (Model CM3024Z) is a compact and efficient device featuring an LCD display for easy monitoring and control. It automatically identifies 12V or 24V system voltages.

Fitur utama:

• Automatic identification of 12V/24V system voltage.
• Built-in industrial master chip for precise charge and discharge control.
• Adjustable parameters for customized battery management.
• Comprehensive 3-stage Manajemen pangisian daya PWM.
• Multiple protection functions: short-circuit, open-circuit, reverse polarity, over-current, overcharge.
• LCD screen with backlight for clear status and data display.
• Double MOS anti-backflow circuit for ultra-low heat generation.

4. Persiyapan lan Instalasi

Tindakake langkah-langkah iki kanggo nginstal pangontrol daya solar sing tepat:

1. Siapke kanggo Instalasi: Choose a suitable mounting location that is dry, well-ventilated, and protected from direct sunlight and moisture. Ensure there is enough space around the controller for air circulation.
2. Sambungake baterei: Connect the battery to the controller's battery terminals (marked with '+' and '-'). Ensure correct polarity. The controller will automatically detect the system voltage (12V utawa 24V).
3. Sambungake Panel Surya: Connect the solar panel to the controller's solar panel terminals (marked with 'PV+' and 'PV-'). Ensure correct polarity.
4. Sambungake beban (Opsional): Connect your DC load to the controller's load terminals (marked with 'Load+' and 'Load-'). Ensure correct polarity. This allows the controller to manage load discharge and provide low-voltage disconnect protection.
5. Verifikasi sambungan: Double-check all connections for tightness and correct polarity before powering on the system.

penting: Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order (load, then solar panel, then battery).

5. Instruksi Operasi

The LCD display provides real-time information about your solar system. Use the buttons below the display to navigate and adjust settings.

Informasi Layar LCD:

The LCD screen shows various parameters such as battery voltage, charging current, discharge current, accumulated charging amount, and load status. The backlight function improves visibility in low-light conditions.

Fungsi Tombol:

• Tombol Menu: Press to cycle through different display screens and enter parameter setting mode.
• Up/Increase Button: Used to increase values when in parameter setting mode.
• Down/Decrease Button: Used to decrease values when in parameter setting mode.

Refer to the on-screen prompts and the specific icons on the display for detailed interpretation of data and settings.

6. Pangopènan

Pangopènan reguler njamin umur dawa lan kinerja optimal saka pengontrol daya solar sampeyan.

• Reresik: Periodically clean the controller's exterior with a dry cloth to remove dust and dirt. Do not use liquid cleaners.
• Priksa sambungan: Annually inspect all wiring connections to ensure they are tight and free from corrosion. Loose connections can lead to power loss or overheating.
• Ventilasi: Ensure that the installation area remains well-ventilated and free from obstructions that could block airflow to the controller's heat sinks.
• Kondisi Lingkungan: Verify that the controller is not exposed to extreme temperatures, humidity, or direct water contact.

7. Ngatasi masalah

If you encounter issues with your Saooer Solar Charge Controller, refer to the following common problems and solutions:

Yen masalah tetep sawise nyoba solusi kasebut, hubungi dhukungan pelanggan.

8. Spesifikasi

9. Warranty lan Dhukungan

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.

Kanggo pitakon umum utawa pitulungan teknis, sampeyan bisa ngunjungi Saooer Store on Amazon.