1. Produk Liwatview
The Heayzoki DC Motor Speed Controller is designed for precise control of DC brush motors. It features Pulse Width Modulation (PWM) technology for accurate and stable speed adjustment, along with a forward/reverse rotation control switch. The robust circuit board and well-designed casing ensure durability and efficient heat dissipation.
Gambar 1: Ngarep view of the Heayzoki DC Motor Speed Controller, highlighting its PWM control, 40A current capacity, and 12-60V DC input range.
2. Spesifikasi
| Merk | Heyzoki |
| Model | Heayzokii4p7n1abgm6351 |
| Vol inputtage | DC 12-60V |
| Max Saiki | 40A |
| Tipe Kontrol | PWM (Pulse Width Modulation) |
| Tipe Motor | DC Brush Motor |
| Kontrol rotasi | Forward/Reverse/Stop (CCW Reversible Switch) |
| Bahan | Tembaga (komponen internal) |
| Ukuran produk (W x H) | 3.54"L x 3.9"T (90mm x 99mm) |
| Bobot Barang | 0.26 kg |
Figure 2: Detailed dimensions of the speed controller for installation planning.
3. Persiyapan lan Instalasi
Follow these steps for proper installation of your DC Motor Speed Controller:
- Pedhot daya: Ensure all power sources are disconnected before beginning installation to prevent electrical shock.
- Pemasangan: Securely mount the controller in a suitable location, considering its dimensions and ensuring adequate ventilation.
- Sambungan Wiring: Refer to the wiring diagram below and connect the power supply and motor leads to the appropriate terminals.
- Connect the positive (+) terminal of your DC power supply to the +POWER terminal ing controller.
- Connect the negative (-) terminal of your DC power supply to the - DAYA terminal ing controller.
- Connect one motor lead to the +MOTOR terminal.
- Connect the other motor lead to the -MOTOR terminal.
- Verifikasi sambungan: Double-check all wiring for correct polarity and secure connections. Loose connections can cause malfunction or damage.
Gambar 3: Mburi view of the controller with clearly labeled power and motor terminals for wiring.
4. Instruksi Operasi
Once installed, operate the speed controller as follows:
- Daya On: Connect the DC power supply. The red indicator light on the front panel should illuminate.
- Motor Direction Control: Use the three-position switch labeled 'RUN' to select the motor's direction or stop it.
- Pindhah ngalih menyang UP position for forward rotation.
- Pindhah ngalih menyang TENGAH position to stop the motor.
- Pindhah ngalih menyang TURUN position for reverse rotation.
- Pangaturan Kecepatan: Rotate the knob labeled 'SPEED CONTROL' to adjust the motor's speed.
- Turn the knob towards 'Low' for slower speeds.
- Turn the knob towards 'High' for faster speeds.
- Daya Mati: To turn off the system, first set the direction switch to the 'STOP' (middle) position, then disconnect the main DC power supply.
Figure 4: Front panel controls including the speed adjustment knob and the forward/reverse/stop switch.
5. Pangopènan
To ensure the longevity and optimal performance of your speed controller, follow these maintenance guidelines:
- Reresik: Resiki sisih njaba controller kanthi periodik nganggo kain alus lan garing. Aja nggunakake pembersih utawa pelarut sing abrasif. Priksa manawa ora ana bledug utawa rereged sing nglumpuk ing bolongan ventilasi.
- Pemriksaan: Regularly inspect all wiring connections to ensure they remain secure and free from corrosion or damage.
- Lingkungan: Operate the controller within its specified temperature and humidity ranges. Avoid exposure to excessive moisture, dust, or corrosive environments.
- Ventilasi: Ensure the controller has adequate airflow around it to prevent overheating, especially during prolonged operation at high loads.
6. Ngatasi masalah
If you encounter issues with your Heayzoki DC Motor Speed Controller, refer to the following table:
| Masalah | Kemungkinan Penyebab | Solusi |
|---|---|---|
| Motor ora mlaku | No power supply; Incorrect wiring; Faulty motor; Direction switch in 'STOP' position. | Priksa sambungan daya lan voltase sumber dayatage; Verify wiring against diagram; Test motor independently; Ensure direction switch is in 'Forward' or 'Reverse'. |
| Motor runs erratically or at incorrect speed | Loose wiring connections; Incompatible motor; Speed knob setting; Overload. | Check and secure all wiring; Ensure motor is compatible with controller specifications; Adjust speed knob; Reduce motor load. |
| Controller overheat | Excessive load on motor; Insufficient ventilation; Short circuit. | Reduce motor load; Ensure adequate airflow around the controller; Check for short circuits in wiring or motor. |
| Direction switch does not change motor direction | Faulty switch; Incorrect motor type (not reversible). | Verify switch functionality; Confirm motor is a reversible DC brush type. |
Yen masalah tetep sawise nyoba solusi kasebut, hubungi dhukungan pelanggan.
7. Informasi babar pisan
Heayzoki products are manufactured to high-quality standards. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. The warranty period typically begins from the date of purchase. Please retain your proof of purchase for any warranty claims. The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or normal wear and tear.
8. Dhukungan Pelanggan
For further assistance, technical support, or warranty inquiries, please contact Heayzoki customer service through the retailer where the product was purchased or visit the official Heayzoki brand store online. When contacting support, please have your product model number (Heayzokii4p7n1abgm6351) and purchase details ready.
You can find more information about Heayzoki products at: Heayzoki Store