Milesight MS-C2972-FIPB 2MP Pro Dome IP Network Camera User Manual

Produk Overview

The Milesight MS-C2972-FIPB is a 2MP Pro Dome IP Day/Night Network Camera designed for robust surveillance applications. It features remote focus and zoom capabilities, an IK10 vandal-proof and IP66 weather-resistant casing, and advanced imaging technologies like 140 dB WDR (Wide Dynamic Range) and Smart IR II for superior image quality in varying light conditions.

This camera supports H.265 video compression for efficient storage and bandwidth usage, and includes a 256GB MicroSD card slot for on-board storage. It is fully ONVIF compliant, ensuring broad compatibility with various network video recorders (NVRs) and video management systems (VMS).

Fitur Utama

• Zoom lan Fokus Bermotor: Allows for remote adjustment of the camera's field of view lan ketajaman.
• IK10 Vandal-proof & IP66 Weather-resistant: Ensures durability and protection against impact and harsh environmental conditions, suitable for outdoor use.
• 140 dB WDR: Provides clear images in scenes with strong contrast, such as bright backlighting.
• Smart IR II: Advanced infrared technology for uniform illumination in low-light conditions, preventing overexposure of close objects.
• Kompresi H.265+: Reduces bandwidth and storage requirements significantly compared to older compression standards.
• 256GB MicroSD Support: Enables on-board storage for local recording and redundancy.
• Full ONVIF Compliance: Ensures interoperability with a wide range of surveillance equipment.
• SIP/VoIP Support: Integrates voice and video over IP for enhanced communication capabilities.

Setup lan Instalasi

Isi Paket

Sadurunge miwiti instalasi, priksa manawa kabeh komponen ana:

• Milesight MS-C2972-FIPB IP Camera
• Cithakan sing dipasang
• Sekrup Pemasangan lan Colokan Tembok
• Konektor anti banyu kanggo Kabel Ethernet
• Pandhuan wiwitan cepet

Pasang Kamera

The MS-C2972-FIPB is designed for ceiling mount installation. Follow these steps:

1. Siapke lumahing Mounting: Choose a suitable location on a ceiling or wall that can support the camera's weight and provides the desired field of view.
2. Detach the Mounting Plate: Rotate the camera body counter-clockwise to detach it from the mounting plate. This plate will be secured to the surface first.



3. Tandhani Lubang Bor: Use the provided mounting template to mark the positions for drilling holes on the mounting surface.
4. Drill Lubang: Drill holes according to the marked positions. Insert wall plugs if mounting on a masonry surface.
5. Plat Pemasangan sing aman: Pasangake plat pemasangan menyang permukaan nggunakake sekrup sing wis disedhiyakake.
6. Sambungake kabel: Route the Ethernet cable through the mounting plate and connect it to the camera's RJ45 port. Ensure a waterproof connection using the supplied connector for outdoor installations. If not using PoE, connect the DC12V power supply.
7. Pasang Badan Kamera: Align the camera body with the mounting plate and rotate clockwise until it locks securely into place.

Network Connection and Initial Setup

The camera supports Power over Ethernet (PoE) for simplified installation, requiring only one Ethernet cable for both power and data. Alternatively, it can be powered by a 12V DC adapter.

1. Nyambung menyang Jaringan: Connect the camera to your network switch or router using an Ethernet cable. If using PoE, ensure your switch supports PoE (802.3af).
2. Temokake Kamera: Use the Milesight Smart Tools software (available on the Milesight websitus) kanggo nemokake kamera ing jaringan sampeyan.
3. Menehi Alamat IP: Assign a static IP address or configure DHCP for the camera.
4. Akses Web Antarmuka: Bukak a web browser lan ketik alamat IP kamera kanggo ngakses sawijining web antarmuka.
5. Login dhisikan: Log in using the default username and password (refer to the Quick Start Guide for default credentials). It is highly recommended to change the default password immediately for security.
6. Nganyari Firmware: Check for and install any available firmware updates to ensure optimal performance and security.

Ngoperasikake Kamera

Remote Focus and Zoom

The MS-C2972-FIPB features a motorized varifocal lens, allowing you to adjust the zoom and focus remotely from the camera's web interface or compatible NVR/VMS software. This eliminates the need for manual adjustment at the camera's physical location.

Konfigurasi Video

Access the "Video" settings in the web antarmuka kanggo ngonfigurasi:

• Resolusi: Up to 1920x1080 (2MP).
• Frame Rate: Adjust for desired smoothness of video.
• Kompresi: Select H.265+, H.265, H.264+, H.264, or MJPEG. H.265+ is recommended for efficiency.
• Bit Rate: Configure constant (CBR) or variable (VBR) bit rates.
• Setelan Gambar: Adjust brightness, contrast, saturation, sharpness, WDR, and noise reduction.
• Masking privasi: Define up to 8 areas to be masked for privacy concerns.

Konfigurasi Audio

The camera includes a built-in microphone and supports two-way audio via an audio output interface. Configure audio settings under the "Audio" section:

• Kompresi Audio: G.711, AAC, G.722, G.726.
• Keuntungan Mikrofon: Adjust sensitivity of the built-in microphone.
• Audio rong arah: Enable and configure for interactive communication.

Storage and Recording

The camera supports local storage on a MicroSD card up to 256GB. Configure recording schedules, motion detection recording, and continuous recording options in the "Storage" settings.

SIP/VoIP Integration

The MS-C2972-FIPB supports SIP/VoIP for voice and video-over-IP functionality. This allows for integration with VoIP systems for advanced communication and monitoring. Refer to the "System" or "Network" settings for SIP/VoIP configuration.

Pangopènan

Reresik

• Lens and Dome Cover: Regularly clean the camera lens and the transparent dome cover with a soft, clean cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution specifically designed for optical surfaces. Avoid harsh chemicals that could damage the coating.
• Badan kamera: Ngilangke awak kamera nganggo iklanamp kain kanggo mbusak bledug lan rereget.

Nganyari Firmware

Periodically check the Milesight official website for new firmware versions. Keeping the firmware updated ensures optimal performance, introduces new features, and addresses potential security vulnerabilities.

• Download firmware paling anyar file from the Milesight support page.
• Ngakses kamera web antarmuka lan navigasi menyang bagean "Sistem" utawa "Pangopènan".
• Follow the on-screen instructions to upload and install the firmware. Do not power off the camera during the update process.

Pertimbangan Lingkungan

Although the camera is IP66 rated for weather resistance, extreme conditions can still affect performance. Ensure proper drainage around the camera if installed in areas prone to heavy rain or snow accumulation. Avoid direct exposure to prolonged strong sunlight if possible, as this can affect image quality and component lifespan.

Ngatasi masalah

Spesifikasi

Warranty lan Dhukungan

Specific warranty details for the Milesight MS-C2972-FIPB camera are typically provided at the point of purchase or can be found on the official Milesight websitus. Mangga nyimpen bukti tuku kanggo claims babar pisan.

For technical support, product inquiries, or service requests, please visit the official Milesight support portal or contact their customer service. Contact information is usually available on the manufacturer's websitus.

Note: This manual provides general guidance. For detailed technical specifications and advanced configurations, please refer to the complete product documentation available on the Milesight official websitus.