Secukey SK4-W Standalone Access Control System

1. Pambuka

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Secukey SK4-W Standalone Access Control System. Please read this manual carefully before installation and use to ensure proper functionality and safety.

The Secukey SK4-W is a robust, IP66-rated access control device designed for outdoor use, featuring RFID card and PIN code access. It is an ideal solution for securing doors, gates, and other entry points.

2. Produk Liwatview

2.1 Fitur Utama

• IP66 Waterproof and Anti-Vandal Design: Cocok kanggo lingkungan njaba ruangan sing atos.
• Mode Akses Multiple: Supports RFID card only, PIN code only, or Card + PIN for enhanced security.
• Kapasitas Pangguna Dhuwur: Ngatur nganti 1000 pangguna.
• Integrated Relay: Built-in NO, NC, Com relay for direct door lock control.
• Adjustable Output Times: Programmable lock output time (1-99 seconds) and alarm output time (1-3 minutes).
• Wiegand 26-bit Interface: Supports external Wiegand readers, exit buttons, and alarms.
• Latch Mode: Allows the door or gate to remain open.
• Wide Voltage Range: Operates on 12~28V AC/DC.
• Keypad backlit: Njamin visibilitas ing kahanan cahya sing kurang.
• Konstruksi awet: Paduan seng casing with powder coating.

2.2 Komponen Klebu

• 1 x Secukey SK4-W Standalone Access Control Device (RFID/PIN)
• 1 x Master Add Card
• 1 x Master Delete Card
• 1 x Manual pangguna

2.3 Produk Views

Gambar 1: Ngarep view of the SK4-W unit, highlighting the keypad and Secukey branding.

Gambar 2: Angled view of the SK4-W, providing a perspective of its slim profile.

Gambar 3: Sisih view of the SK4-W unit.

Gambar 4: Sisih liyane view of the SK4-W unit.

Gambar 5: Mbalik view of the SK4-W unit, displaying the integrated wiring for installation.

3. Persiyapan lan Instalasi

3.1 Pasang Piranti

The SK4-W is designed for surface mounting. Choose a secure location near the door or gate, ensuring it is within reach for users and protected from direct impact. Use appropriate screws and wall plugs for the mounting surface.

3.2 Diagram Wiring

The device requires a 12~28V AC/DC power supply (not included). Connect the wires according to the diagram provided in the full manual. Ensure all connections are secure and insulated to prevent short circuits.

• Input daya: Connect to 12~28V AC/DC power source.
• Lock Output (NO/NC/COM): Connect to your electric lock.
• Output weker: Connect to an external alarm system (if applicable).
• Wiegand In/Out: For connecting external Wiegand readers or other Wiegand devices.
• Tombol Metu: Connect a push-to-exit button for convenient egress.

For detailed wiring schematics, please refer to the comprehensive wiring diagram included in the product packaging.

4. Instruksi Operasi

4.1 Initial Setup and Master Cards

Upon first power-up, the device will be in factory default mode. Use the included Master Add Card and Master Delete Card to manage user access.

• Nambahake Pangguna: Present the Master Add Card, then present the new user's RFID card or enter their PIN.
• Mbusak pangguna: Present the Master Delete Card, then present the user's RFID card or enter their PIN to be deleted.

4.2 Access Modes

The SK4-W supports three primary access modes:

1. Card Only Mode: Users gain access by presenting a valid RFID card.
2. PIN Only Mode: Users gain access by entering a valid 4-6 digit PIN code.
3. Card + PIN Mode: Users must present a valid RFID card and then enter their corresponding PIN code for access. This mode offers the highest security.

Refer to the full programming guide for instructions on how to switch between access modes and manage user PINs.

4.3 Visitor PINs

The SK4-W supports up to 10 visitor PINs, which can be set to be valid for 1 to 10 uses. This feature is useful for temporary access for guests or service personnel.

Figure 6: The SK4-W supports visitor PINs and is IP66 waterproof, suitable for outdoor installation.

4.4 Latch Mode

The latch mode allows the door or gate to remain unlocked for an extended period, which can be useful during peak hours or for maintenance. Consult the programming manual for activation and deactivation procedures.

5. Pangopènan

The Secukey SK4-W is designed for minimal maintenance due to its robust construction and IP66 rating. However, regular checks can prolong its lifespan and ensure optimal performance.

• Reresik: Wipe the keypad and casing karo alus, damp kain. Ngindhari pembersih abrasif utawa pelarut.
• Priksa sambungan: Periodically inspect wiring connections for any signs of wear, corrosion, or loosening.
• Nganyari Firmware: Priksa pabrikan websitus kanggo nganyari perangkat kukuh sing kasedhiya.

Figure 7: The SK4-W is designed to withstand extreme operating temperatures, from -40°C to 60°C.

6. Ngatasi masalah

If the problem persists, please contact Secukey technical support for assistance.

Figure 8: Wiegand 26-bit input and output signal timing diagram.

7. Spesifikasi

8. Warranty lan Dhukungan

Secukey products are manufactured to high quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Secukey websitus.

Informasi Kontak:

• Produsen: Secukey
• Websitus: www.secukey.com (Examplink, link nyata bisa beda-beda)
• Layanan Pelanggan: Deleng kemasan produk utawa websitus kanggo kontak dhukungan regional.

Mangga nyimpen bukti tuku kanggo claims babar pisan.