TMH TMH-25LED-R
TMH 6-Inch Oval Arrow LED Red Tail Lights (2-Pack) Instruction Manual

Gambar 1: Swaraview of TMH 6-Inch Oval Arrow LED Red Tail Lights.
1. Pambuka
Thank you for choosing TMH 6-Inch Oval Arrow LED Red Tail Lights. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new lights. Please read these instructions thoroughly before installation and retain this manual for future reference. These lights are designed for use as tail lights and turn signals on various vehicles including trucks, trailers, buses, and dump trucks, operating on a 12V DC system.

Gambar 1.1: TMH 6-Inch Oval Arrow LED Red Tail Lights. This image displays two red oval LED lights, each featuring an arrow pattern. Four mounting screws are visible in the foreground.
Each light features 25 super bright F3 Piranha LEDs arranged in an arrow pattern, providing clear visibility and signaling.

Gambar 1.2: LED Count and Arrow Pattern. This image provides a close-up view of the light's lens, clearly showing the 25 individual F3 Piranha LEDs arranged to form a distinct arrow shape.

Gambar 1.3: F3 Piranha LED. This image shows a detailed view of the F3 Piranha LED component used in the lights, known for its brightness and durability.
2. Informasi Safety
- Priksani dhisik batere kendaraan sadurunge nindakake pakaryan listrik kanggo nyegah sengatan listrik utawa korsleting.
- Ensure all wiring connections are secure and properly insulated to prevent corrosion and electrical faults.
- Priksa manawa volume operasitage of your vehicle is 12V DC. Connecting to an incorrect voltage may damage the lights.
- Nganggo peralatan protèktif pribadi sing cocog, kayata kaca tingal safety lan sarung tangan, nalika instalasi.
- Do not modify the lights or their components. Unauthorized modifications may void the warranty and create safety hazards.
- Yen sampeyan ora yakin babagan bagean apa wae saka proses instalasi, takon karo tukang listrik otomotif sing mumpuni.
3. Isi Paket
Paket kalebu item ing ngisor iki:
- 2 x TMH 6-Inch Oval Arrow LED Red Tail Lights
- 4 x Pemasangan Sekrup
4. Spesifikasi
| Fitur | Rincian |
|---|---|
| Merk | TMH |
| Nomer Model | TMH-25LED-R |
| Jinis cahya | LED Tail Light / Turn Signal |
| Jumlah LED | 25 Piranha LEDs per light |
| warna | Red Light & Red Lens |
| Fungsi | Tail Light (Low Brightness), Brake/Turn Signal (High Brightness) |
| Operasional Voltage | 12V DC |
| Wattage | 3.31 watt |
| Tipe Pemasangan | Gunung lumahing |
| Ukuran (L x W x H) | 7.5 x 3.3 x 1 inci |
| Bahan | ABS Housing, Polycarbonate Lens |
| Fitur | Waterproof, Shockproof, Dustproof |
| UPC | 757347529700 |

Gambar 4.1: Product Dimensions. This diagram illustrates the oval shape and measurements of the light, indicating a length of 7.5 inches, a width of 3.3 inches, and a depth of 1 inch.
5. Instalasi
5.1 Priksa Pra-Pasang
- Ensure the mounting surface is clean, flat, and free from obstructions.
- Confirm that the vehicle's electrical system is 12V DC.
- Gather necessary tools: drill, screwdriver, wire strippers, crimpers, electrical tape or heat shrink tubing.
5.2 Pandhuan Pemasangan
- Position the light on the desired surface. Ensure the arrow pattern is oriented correctly for the intended signal direction.
- Mark the locations for the four mounting screws.
- Drill pilot holes if necessary, ensuring they are appropriately sized for the provided screws.
- Secure the light to the surface using the provided mounting screws. Do not overtighten.
5.3 Wiring Diagram lan Sambungan
The TMH LED Tail Lights feature a 3-wire connection system for dual-functionality (low brightness for tail light, high brightness for brake/turn signal).
- Kawat ireng: Tanah (-)
- Kawat abang: Low Brightness (Tail Light / Running Light) (+)
- Kawat Putih: High Brightness (Brake Light / Turn Signal) (+)
- Sambungake ing Kawat ireng from the light to the vehicle's chassis ground or negative (-) terminal.
- Sambungake ing Kawat abang from the light to the vehicle's tail light or running light positive (+) circuit. This will activate the low brightness mode.
- Sambungake ing Kawat putih from the light to the vehicle's brake light or turn signal positive (+) circuit. This will activate the high brightness mode.
- Ensure all connections are secure and protected from moisture and abrasion using electrical tape or heat shrink tubing.

Gambar 5.1: Wiring Diagram. This image illustrates the three-wire connection: black for ground, red for low brightness (tail light), and white for high brightness (brake/turn signal).

Gambar 5.2: Two-Step Brightness Function. This image demonstrates the difference between the low brightness (Step 1) and high brightness (Step 2) modes of the LED light.
6. Operasi
Once properly installed and wired, the TMH 6-Inch Oval Arrow LED Red Tail Lights will operate as follows:
- When the vehicle's running lights or tail lights are activated, the lights will illuminate at padhange kurang (via the Red wire connection).
- When the vehicle's brake pedal is pressed or the turn signal is activated, the lights will illuminate at padhange dhuwur (via the White wire connection). If used as a turn signal, the high brightness will flash according to the vehicle's flasher relay.
Cathetan: If you intend to use these lights solely as turn signals or emergency lights, a flasher relay or controller (not included) may be required for proper flashing functionality.
7. Pangopènan
The TMH LED Tail Lights are designed for durability and minimal maintenance.
- Reresik: Clean the lens periodically with a soft cloth and mild soap and water to ensure maximum light output. Avoid abrasive cleaners or solvents.
- Pemriksaan: Regularly inspect the lights and wiring for any signs of damage, loose connections, or corrosion. Address any issues promptly to maintain optimal performance and safety.
- Tahan Cuaca: These lights are waterproof, shockproof, and dustproof, designed to withstand various environmental conditions.

Gambar 7.1: Waterproof and Weatherproof Design. This image shows the light being exposed to water, highlighting its resistance to environmental elements.
8. Ngatasi masalah
If you encounter issues with your TMH LED Tail Lights, refer to the following troubleshooting guide:
| Masalah | Kemungkinan Penyebab | Solusi |
|---|---|---|
| Lampu ora sumunar | No power supply, incorrect wiring, faulty ground connection, blown fuse. |
|
| Lampune redup utawa kedhip-kedhip | Poor electrical connection, insufficient voltage, corrosion in wiring. |
|
| Mung siji tingkat padhange bisa | Incorrect wiring for Red or White wire, faulty connection. |
|
If troubleshooting steps do not resolve the issue, please contact TMH customer support.
9. Warranty lan Dhukungan
9.1 Informasi babar pisan
TMH provides a 1-year Premium TMH warranty for these LED Tail Lights, covering free replacement for manufacturing defects. Please retain your proof of purchase for warranty claims.
9.2 Dhukungan Pelanggan
For technical assistance, warranty claims, or any questions regarding your TMH product, please visit the official TMH websitus utawa hubungi departemen dhukungan pelanggan.
TMH Brand Store: https://www.amazon.com/stores/TMH/page/47AA2177-AADC-4F12-A7C1-4D521FE33484
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.