BEPER 40.300 Hair Clipper User Manual

1. Pambuka

This manual provides essential instructions for the safe and effective use of your BEPER 40.300 Hair Clipper. Please read all instructions carefully before operating the device and retain this manual for future reference. The BEPER 40.300 is a rechargeable hair clipper equipped with ceramic and titanium blades, designed for precise cutting and comfortable handling.

2. Informasi Safety

• Jaga piranti tetep garing. Aja digunakake cedhak banyu utawa ing kahanan teles.
• Aja nyemplungake piranti ing banyu utawa cairan liyane.
• Tetep adoh saka bocah-bocah.
• Priksa manawa adaptor daya kompatibel karo sumber daya lokal.
• Copot piranti sadurunge ngresiki utawa perawatan.
• Do not use if the blades are damaged or broken, as this may cause injury.
• Only use original accessories provided by the manufacturer.

3. Isi Paket

Bukak kothak kasebut kanthi ati-ati lan priksa manawa kabeh barang ana lan ana ing kahanan sing apik. Yen ana barang sing ilang utawa rusak, hubungi pengecer sampeyan.

Image: The BEPER 40.300 Hair Clipper shown with all included accessories.

• BEPER 40.300 Hair Clipper
• Adaptor Pengisian Daya
• Sikat Reresik
• Botol Lenga Pelumas
• 4 Interchangeable Comb Attachments (3mm, 6mm, 9mm, 12mm)

4. Produk Liwatview

Familiarize yourself with the main components of your hair clipper before use.

Gambar: Sisih view of the BEPER 40.300 Hair Clipper, highlighting its ergonomic design.

• Ceramic and Titanium Blades: For precise and efficient cutting.
• Adjustable Rotary Ring: Allows for fine-tuning of cutting lengths from 0.8mm to 2mm.
• Saklar Daya: To turn the clipper on and off.
• Port Pengisian: Kanggo nyambungake adaptor pangisi daya.
• Gagang ergonomis: Designed for comfortable grip and control.

5. Setup

5.1 Ngisi Daya Clipper

1. Priksa manawa clipper dipateni.
2. Connect the charging adapter to the charging port on the clipper.
3. Tancepake adaptor menyang stopkontak sing cocog.
4. Allow approximately 8 hours for a full charge. A fully charged clipper provides up to 60 minutes of continuous operation.
5. Do not overcharge the battery. Unplug the charger once charging is complete.

5.2 Masang Lampiran Sisir

The clipper comes with 4 comb attachments for different cutting lengths (3mm, 6mm, 9mm, 12mm).

1. Priksa manawa clipper dipateni.
2. Select the desired comb attachment.
3. Align the comb attachment with the clipper head and slide it on until it clicks securely into place.
4. To remove, gently push the comb attachment upwards and slide it off.

6. Instruksi Operasi

6.1 Operasi dhasar

1. Ensure the clipper is fully charged or connected to power if using corded.
2. Select your desired cutting length using either the adjustable rotary ring or by attaching a comb guide.
3. Press the power switch to turn on the clipper.
4. Hold the clipper with the blades facing downwards and gently move it against the direction of hair growth.
5. Kanggo asil sing paling apik, gunakake ing rambut sing resik lan garing.
6. After use, press the power switch to turn off the clipper.

6.2 Adjusting Cutting Length (without comb attachment)

The rotary ring allows for precise adjustments of the blade length from 0.8mm to 2mm.

Image: Detail of the adjustable rotary ring on the BEPER 40.300 Hair Clipper, showing length settings.

• Rotate the ring located just below the blades to select your desired length: 0.8mm, 1.1mm, 1.4mm, 1.7mm, or 2mm.
• Ensure the ring clicks into place at the chosen setting before use.

6.3 Using Comb Attachments

For longer cutting lengths, use the provided comb attachments (3mm, 6mm, 9mm, 12mm).

• Attach the desired comb attachment as described in Section 5.2.
• The rotary ring setting will be overridden by the comb attachment.
• Move the clipper smoothly through the hair, ensuring the comb attachment remains flat against the scalp or skin.

7. Pangopènan

Regular cleaning and maintenance will ensure optimal performance and extend the life of your hair clipper.

7.1 Reresik Blades

1. Ensure the clipper is switched off and unplugged from the charger.
2. Remove any attached comb guide.
3. Use the provided cleaning brush to remove loose hairs from the blades and the clipper head.
4. For a more thorough clean, the blade set can be carefully detached (refer to specific instructions if provided with the product for blade removal). Rinse the detached blades under running water, ensuring the main body of the clipper does not get wet. Dry thoroughly before reattaching.
5. Aja nggunakake pembersih abrasif utawa pelarut.

7.2 Ngilangi Blades

To maintain cutting performance, lubricate the blades regularly.

1. After cleaning, apply 1-2 drops of the provided lubricating oil to the blades.
2. Turn on the clipper for a few seconds to allow the oil to distribute evenly.
3. Ngilangke lenga keluwihan nganggo kain alus.

8. Ngatasi masalah

If you encounter issues with your BEPER 40.300 Hair Clipper, refer to the following common problems and solutions:

Yen masalah tetep sawise nyoba solusi kasebut, hubungi dhukungan pelanggan.

9. Spesifikasi

• Model: 40.300
• Merk: BEPER
• Blades: Ceramic and Titanium
• Adjustable Cutting Lengths (without comb): 0.8mm, 1.1mm, 1.4mm, 1.7mm, 2mm
• Lampiran sisir: 3mm, 6mm, 9mm, 12mm
• Sumber Daya: Rechargeable Battery (1 C battery included)
• Wektu Pengisian Daya: Kurang luwih 8 jam
• Wektu operasi: Nganti 60 menit (isi daya)
• Bahan: Ceramic (blades)
• ukuran: 27.6 x 20.8 x 6.2 cm (Paket)
• Bobot: 600 g (paket)
• ASIN: B076DC7MGS
• GTIN: 08051772717940

10. Warranty lan Dhukungan

This product is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, spare parts, or any inquiries not covered in this manual, please contact BEPER customer service or your local retailer.

Simpen kuitansi tuku minangka bukti tuku kanggo klaim garansi.