Lepro Industrial LED Desk Lamp

Pambuka

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Iki serbaguna lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Wacanen pandhuan iki kanthi tliti sadurunge instalasi lan operasi, lan simpen kanggo referensi ing mangsa ngarep.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Pandhuan Safety

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Gunakake mung bohlam dasar E27 kanthi daya maksimaltage saka 40W.
• Aja nggunakake lamp karo kabel listrik utawa plug rusak.
• This product is intended for indoor use only. Do not expose to water or high humidity.
• Tansah lamp adoh saka bahan sing gampang kobong.
• Aja nyoba mbongkar utawa ndandani lamp dhewe. Hubungi personel sing mumpuni kanggo layanan.

Isi Paket

Mangga dipriksa paket kanggo item ing ngisor iki:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Manual pangguna

Note: The E27 bulb is not included and must be purchased separately.

Setup lan Instalasi

Follow these steps to assemble and install your desk lamp:

1. Pasang Clamp: Aman nyepetake clamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Ngumpul Lamp Kepala: Pasang lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Insert the Arm: Kasebut kanthi teliti, masang lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Pasang bohlam: Priksa manawa lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp soket. Aja kenceng.
5. Nyambung menyang Daya: Pasang lampkabel daya menyang stopkontak listrik sing cocog.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Gambar: The lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Instruksi Operasi

Daya On/Off: Locate the rocker switch on the power cord. Press the switch to turn the lamp urip utawa mati.

Nyetel Sudut Cahya: Ing lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Gambar: The lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Pangopènan

Reresik: Kanggo ngresiki lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Penggantian bohlam: Sadurunge ngganti bohlam, priksa manawa lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp bali ing.

Ngatasi masalah

• Lamp ora nguripake:
  • Priksa manawa kabel listrik wis dipasang kanthi aman menyang stopkontak.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Priksa stopkontak kanthi nyolok piranti liya.
• Cahya kelip-kelip:
  • Priksa manawa bohlam wis disekrup kanthi kenceng.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Check for loose connections in the power cord or outlet.
• Lamp ora stabil:
  • Priksa manawa clamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Priksa manawa lamp arm is properly inserted into the clamp gabungan.

Spesifikasi

Image: Product dimensions and key features like E27 bulb base and power cord length.

Warranty lan Dhukungan

Garansi: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Dhukungan Pelanggan: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.