Pambuka
Thank you for choosing the SKMEI Model 1235 Analog-Digital Watch. This manual provides detailed instructions for setting up, operating, and maintaining your watch to ensure optimal performance and longevity. Please read this manual carefully before using your watch.
Produk Overview
The SKMEI Model 1235 is a robust analog-digital wristwatch designed for daily wear and sports activities. It features a dual time display, stopwatch, alarm, and backlight functions, all housed in a durable plastic case with 50-meter water resistance.
Gambar 1: Ngarep view of the SKMEI Model 1235 Analog-Digital Watch. This image displays the watch's black case, gold accents, and the dual analog-digital display. The 'LIGHT', 'MODE', 'START', and 'RESET' buttons are clearly visible.
Fungsi Tombol:
- Tombol Cahya: Ngaktifake lampu latar kanggo tampilan digital.
- Tombol MODE: Cycles through different operating modes (Time, Chronograph, Alarm).
- Tombol START: Used to start/stop functions in Chronograph mode, and adjust values during setting.
- Tombol RESET: Used to reset functions in Chronograph mode, and select items during setting.
Setup
1. Setting Analog Time:
The analog hands are set independently from the digital display. Pull out the crown located on the right side of the watch case. Rotate the crown to adjust the hour and minute hands to the desired time. Once set, push the crown back in to secure the time.
2. Setting Digital Time and Date:
- Saka tampilan wektu normal, penet tombol MODE tombol kaping telu kanggo mlebu mode setelan wektu. Angka detik bakal kedhip-kedhip.
- Tekan ing RESET tombol kanggo muter liwat item setelan: Detik → Jam → Menit → Wulan → Tanggal → Dina Minggu.
- Gunakake ing MULAI tombol kanggo nyetel nilai sumunar. Tahan ing MULAI tombol kanggo nambah nilai kanthi cepet.
- Kanggo ngalih ing antarane format 12 jam lan 24 jam, penet tombol RESET button until the hour digits are flashing, then press the MULAI tombol kanggo ngalih.
- Sawise kabeh setelan disetel, penet tombol MODE tombol kanggo metu saka mode setelan lan bali menyang tampilan wektu normal.
Mode operasi
1. Mode Chronograph (Stopwatch):
- Saka tampilan wektu normal, penet tombol MODE tombol sapisan kanggo mlebu mode Kronograf. Layar bakal nuduhake "00:00:00".
- Tekan ing MULAI tombol kanggo miwiti wektu.
- Tekan ing MULAI tombol maneh kanggo ngaso wektu.
- Tekan ing RESET button while paused to reset the stopwatch to "00:00:00".
- Kanggo bali menyang tampilan wektu normal, penet tombol MODE tombol.
2. Mode Weker:
- Saka tampilan wektu normal, penet tombol MODE tombol kaping pindho kanggo mlebu mode Alarm. Wektu alarm bakal ditampilake.
- Tekan ing RESET tombol kanggo milih digit jam utawa menit sing arep disetel.
- Gunakake ing MULAI tombol kanggo nyetel nilai sumunar.
- Kanggo ngaktifake utawa mateni alarm, pencet tombol MULAI lan RESET buttons simultaneously in Alarm mode. An alarm icon will appear/disappear.
- Kanggo bali menyang tampilan wektu normal, penet tombol MODE tombol.
3. Fungsi Lampu Latar:
Tekan ing LAMPU button (top-left) at any time to illuminate the digital display for a few seconds, allowing visibility in low-light conditions.
Figure 2: The SKMEI Model 1235 watch with its backlight activated, illuminating the digital display for improved visibility in dark environments.
Pangopènan
- Reresik: Wipe the watch regularly with a soft, dry cloth to remove dust and dirt. For stubborn grime, use a slightly damp kain banjur garing sak tenane. Ngindhari bahan kimia sing atos utawa pembersih abrasif.
- Tahan banyu: This watch is water resistant up to 50 meters (5 ATM). This means it is suitable for short periods of recreational swimming or showering. Do not press any buttons while the watch is submerged in water, as this can compromise the water seal. Avoid hot water, as temperature changes can affect the seals.
- Suhu: Aja nganti jam tangan kena suhu ekstrem (panas utawa adhem) sajrone wektu sing suwe, amarga iki bisa mengaruhi umur baterei lan akurasi.
- Dampak: While durable, avoid strong impacts or dropping the watch, which can damage internal components or the case.
- Panggantos baterei: When the display becomes dim or the watch stops functioning, the battery may need replacement. This should ideally be performed by a qualified watch technician to ensure proper sealing and functionality.
Ngatasi masalah
| Masalah | Kemungkinan Penyebab | Solusi |
|---|---|---|
| Tampilan digital kosong utawa surem. | Baterei sithik. | Ganti baterei. |
| Wektu digital iku salah. | Wektu ora disetel kanthi bener utawa pangaturan sing ora disengaja. | Refer to "Setting Digital Time and Date" section to reset the time. |
| Analog hands are incorrect. | Analog time not set correctly or accidental adjustment of the crown. | Refer to "Setting Analog Time" section to reset the hands. Ensure the crown is pushed in fully. |
| Weker ora muni. | Alarm dipateni utawa disetel kanthi ora bener. | Refer to "Alarm Mode" section to activate and set the alarm correctly. |
| Banyu ing njero jam tangan. | Buttons pressed underwater or seals compromised. | Langsung gawanen jam tangan iki menyang teknisi sing mumpuni kanggo dipriksa lan didandani. Aja nganti kena banyu maneh. |
Spesifikasi
| Merk | SKMEI |
| Nomer Model | 1235 |
| Tipe Tampilan | Analog-Digital |
| Jinis Gerakan | Kuarsa |
| Bahan Kasus | Plastik |
| Bahan Jendela Dial | resin |
| Bahan pita | Plastik (PU) |
| Tipe Clasp | Gesper |
| Diameter kasus | 48 mm |
| Ketebalan Case | 17 mm |
| Band Jembar | 24 mm |
| Band Length | 26.5 cm |
| Ambane tahan banyu | 50 Meter (5 ATM) |
| Fitur Khusus | Alarm, Light, Chronograph |
| Bobot Barang | 70 g |
Warranty lan Dhukungan
This SKMEI Model 1235 watch comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including coverage duration and what is covered. For technical support or warranty claims, please contact the authorized SKMEI dealer or service center from whom you purchased the product. Keep your proof of purchase for warranty validation.