EKO Mirage Sensor Bin 30L Stainless Steel (Model: EK9278MT-30L) Instruction Manual

1. Pambuka

Thank you for choosing the EKO Mirage Sensor Bin. This 30-liter stainless steel waste bin features an advanced sensor mechanism for hands-free operation, promoting hygiene and convenience in your home or office. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance.

EKO Mirage Sensor Bin in a modern kitchen setting

Image: The EKO Mirage Sensor Bin, 30L, positioned in a contemporary kitchen environment, showcasing desain stainless steel sawijining ramping.

2. Informasi Safety

Mangga mirsani pancegahan safety ing ngisor iki kanggo nyegah ciloko utawa karusakan ing produk:

Do not immerse the lid or sensor mechanism in water or any other liquid. This can damage electronic components.
Use only the specified battery type (AA batteries). Ensure correct polarity when installing batteries.
Tansah area sensor saka alangan kanggo mesthekake operasi sing bener.
Do not force the lid open or closed manually when the sensor is active, as this may damage the motor.
Produk iki mung ditrapake kanggo panggunaan njero ruangan.
Simpen ing panggonan sing ora bisa digayuh bocah-bocah kanggo nyegah ciloko sing ora disengaja utawa penyalahgunaan.

3. Setup

3.1. Isi Paket

Priksa manawa kabeh komponen ana ing paket kasebut:

EKO Mirage Sensor Bin Body (Stainless Steel)
Sensor Lid Assembly
Inner Bucket (30L)
Instruksi Manual

3.2. Instalasi baterei

The sensor lid requires batteries for operation. Locate the battery compartment on the underside of the lid.

Gently flip the lid over to access the battery compartment.
Bukak tutup kompartemen baterei.
Insert 6 AA batteries (not included) according to the polarity indicators (+/-).
Nutup tutup kompartemen baterei kanthi aman.
Locate the power switch (ON/OFF) on the underside of the lid and switch it to the "ON" position.

Close-up of the EKO Mirage Sensor Bin lid showing the sensor area, power switch, and battery compartment

Gambar: Detil view of the sensor bin lid, highlighting the infrared sensor, the power switch, and the open battery compartment with AA batteries inserted.

3.3. Inner Bucket and Liner Installation

Install the inner bucket and a trash liner:

Place the inner bucket into the main body of the bin. Ensure it sits flush at the bottom.
Drape a standard 30-liter trash bag over the rim of the inner bucket.
Tuck the edges of the trash bag into the designated slots or under the rim of the inner bucket to secure it.
Place the sensor lid assembly onto the main body of the bin, ensuring it is properly aligned and seated.

Close-up of the EKO Mirage Sensor Bin showing the inner bucket being placed into the main body

Image: The black inner bucket of the EKO Mirage Sensor Bin, partially inserted into the stainless steel outer body, demonstrating the liner installation step.

4. Instruksi Operasi

4.1. Sensor Operation (Automatic Mode)

The sensor bin is designed for hands-free operation:

Ensure the power switch on the underside of the lid is in the "ON" position.
Approach the sensor area (located on the front of the lid) with your hand or an object within 10-15 cm (4-6 inches).
The lid will automatically open.
After 5 seconds of inactivity, the lid will automatically close.
If your hand or object remains within the sensor range, the lid will stay open.

4.2. Manual Open/Close

For extended opening or manual control:

To keep the lid open for a longer period, press the "OPEN" button on the lid. The lid will remain open until you press the "CLOSE" button.
To close the lid manually, press the "CLOSE" button.
To return to sensor mode, ensure no buttons are pressed and the power switch is "ON".

EKO Mirage Sensor Bin with its lid fully open, ready for use

Image: The EKO Mirage Sensor Bin with its lid in the fully open position, demonstrating its operational state for waste disposal.

5. Maintenance lan Care

Regular cleaning and proper care will extend the life of your sensor bin:

Reresik njaba: Ngusap njaba stainless steel karo alus, damp cloth and a mild detergent. Dry immediately with a soft, dry cloth to prevent water spots. Do not use abrasive cleaners or scouring pads.
Reresik tutup: Ngresiki tutup karo iklanamp kain. Do not submerge the lid in water. Ensure the sensor area is clean and free of dust or debris.
Reresik Ember Jero: The inner bucket can be removed and washed with soap and water. Rinse thoroughly and dry completely before placing it back into the bin.
Panggantos baterei: Replace all batteries when the lid's operation becomes slow or inconsistent. Always replace with new batteries of the same type.

6. Ngatasi masalah

If you encounter issues with your EKO Mirage Sensor Bin, refer to the following table:

Masalah	Kemungkinan Penyebab	Solusi
Tutup ora mbukak kanthi otomatis.	Ngalih daya OFF. Baterei mati utawa ora dipasang kanthi bener. Sensor macet utawa reged.	Ganti daya menyang ON. Ganti baterei karo anyar, mesthekake polaritas bener. Resik area sensor kanthi kain sing alus lan garing.
Lid opens slowly or inconsistently.	Daya baterei sithik. Motor mechanism obstruction.	Ganti kabeh batere. Check for any physical obstructions around the lid's hinge or opening path.
Tutup ora nutup.	Object continuously in sensor range. Lid mechanism jammed.	Remove any objects from the sensor's detection area. Check for debris or damage around the lid's closing path.

7. Spesifikasi

Model: EK9278MT-30L
Kapasitas: 30 Liter
Bahan: Stainless Steel (Body), ABS Plastic (Lid, Inner Bucket)
daya: 6 x Baterei AA (ora klebu)
Mekanisme Pambuka: Infrared Sensor, Manual Open/Close Buttons
Jinis Rampung: Matte
Bobot barang: Kira-kira 7.6 kg
warna: salaka

8. Warranty & Dhukungan

EKO products are manufactured to high-quality standards. For warranty information or technical support, please contact EKO customer service through their official websitus utawa pengecer ing ngendi produk kasebut dituku.

Mangga nyimpen bukti tuku kanggo claims babar pisan.

EKO Official Websitus: www.ekohome.com

EKO EK9278MT-30L