1. Pambuka
This manual provides essential instructions for the proper installation, operation, and maintenance of your Bogen Classic Series Amp C20. Please read this manual thoroughly before using the product to ensure safe and efficient performance. Retain this manual for future reference.
2. Informasi Safety
PARNGET: Produk iki ngemot bahan kimia sing dingerteni ing Negara Bagian California sing nyebabake kanker lan cacat lair utawa cilaka reproduksi liyane.
Always observe basic safety precautions when using electrical equipment to reduce the risk of fire, electric shock, and injury to persons.
- Aja nyedhiyakake piranti iki kanggo udan utawa kelembapan.
- Aja ngalangi bukaan ventilasi. Instal miturut pandhuan pabrikan.
- Aja masang ing cedhak sumber panas kayata radiator, register panas, kompor, utawa piranti liyane (kalebu ampliifiers) sing ngasilake panas.
- Mung gunakake lampiran/aksesoris sing ditemtokake dening pabrikan.
- Waca kabeh layanan menyang personel layanan sing mumpuni.
3. Produk Liwatview
The Bogen Classic Series Amp C20 is a single-channel amplifier designed for various audio applications. It features robust construction and reliable performance.
3.1 Fitur Utama
- Saluran tunggal amppanguripan
- Surface Mount design
- Input voltage: 120 Volt
- Daya Output: 20 Watt
3.2 Isi Paket
Sawise mbongkar, priksa manawa item ing ngisor iki kalebu:
- Seri Klasik Bogen Amp C20
- corong
- Manual Instruksi (dokumen iki)
3.3 Kontrol Panel Ngarep lan Indikator

Image 1: Front panel of the Bogen Classic Series Amp C20. This image displays the MIC1, MIC2, AUX, and TREBLE control knobs, along with the POWER switch and the "Classic Series" branding.
- MIC1 Input Level Control: Adjusts the volume for Microphone Input 1.
- MIC2 Input Level Control: Adjusts the volume for Microphone Input 2.
- AUX Input Level Control: Adjusts the volume for the Auxiliary input.
- Kontrol TREBLE: Adjusts the high-frequency response of the audio output.
- Ngalih daya: Toggles ing ampdaya urip lan mati lifier.
3.4 Sambungan Panel mburi

Image 2: Rear panel of the Bogen Classic Series Amp C20. This image shows the various input and output connections, including power input and speaker terminals.
The rear panel contains connections for power, microphone inputs, auxiliary inputs, and speaker outputs. Specific details on these connections are provided in the Setup section.
4. Persiyapan lan Instalasi
4.1 Pemasangan
The Bogen Classic Series Amp C20 is designed for surface mounting. Ensure the mounting surface is stable and capable of supporting the unit's weight (approximately 4.5 pounds). Allow adequate ventilation around the unit to prevent overheating.
4.2 Sambungan Listrik
- Ensure the POWER switch on the front panel is in the OFF position.
- Connect the power cord to a standard 120 Volt AC outlet.
4.3 Sambungan Input Audio
Connect your audio sources to the appropriate inputs on the rear panel:
- Mikrofon: Connect microphones to the MIC1 and MIC2 input jacks.
- Piranti bantu: Connect line-level audio sources (e.g., CD player, media player) to the AUX input jacks.
4.4 Sambungan Output Speaker
Connect your speakers to the speaker output terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for all speaker connections. Refer to your speaker's manual for impedance matching requirements.
5. Operasi
5.1 Powering On / Off
- Kanggo daya ing amplifier, press the POWER switch on the front panel to the ON position. The power indicator (if present) will illuminate.
- To power off, press the POWER switch to the OFF position.
5.2 Nyetel Tingkat Input
- Start with all input level controls (MIC1, MIC2, AUX) set to their minimum position.
- Begin playing audio from your desired source.
- Slowly increase the corresponding input level control until the desired volume is achieved.
- Adjust the TREBLE control to fine-tune the high-frequency response to your preference.
5.3 Tip Panggunaan Umum
- Avoid setting volume levels too high, which can cause distortion and potentially damage speakers.
- Priksa manawa kabeh sambungan aman sadurunge ngoperasikake amppanguripan
6. Pangopènan
6.1 Reresik
Ngilangke njaba saka amplifier with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners, as they may damage the finish or internal components.
6.2 Ventilasi
Priksa kanthi rutin manawa bukaan ventilasi kosong saka bledug lan lebu kanggo mesthekake aliran udara sing tepat lan nyegah overheating.
6.3 Nglayani
Ora ana bagean sing bisa dilayani pangguna ing njero amppengangkat. Waca kabeh layanan menyang personel layanan sing mumpuni.
7. Ngatasi masalah
If you experience issues with your Bogen Classic Series Amp C20, consult the following table before contacting support.
| Masalah | Kemungkinan Penyebab | Solusi |
|---|---|---|
| Ora ana output swara. |
|
|
| Swara kleru. |
|
|
| Static or crackling from knobs. | Dust or oxidation on control potentiometers. | Consult qualified service personnel for cleaning or replacement of potentiometers. |
| Unit becomes excessively warm or emits odor. |
|
|
8. Spesifikasi
| Fitur | Rincian |
|---|---|
| Merk | Bogen |
| Model | C20 |
| Nomer Model Item | C20 |
| Produsen Part Number | C20 |
| Ukuran Item (L x W x H) | 11.37 x 7.37 x 2.87 inci |
| Dimensi produk | 11.37 x 7.37 x 2.87 inci |
| Bobot Barang | 4.5 kab |
| Voltage | 120 volt |
| Wattage | 50 watt |
| Daya Output | 20 Watt |
| Jumlah Saluran | 1 |
| Tipe Pemasangan | Gunung lumahing |
| Produsen | Bogen |
| UPC | 765368330250 |
| Tanggal Kapisan Kasedhiya | 16 Juli 2004 |
Cathetan: Spesifikasi bisa diganti tanpa kabar.
9. Warranty lan Dhukungan
For warranty information and technical support, please refer to the official Bogen websitus utawa hubungi departemen layanan pelanggan. Simpen kuitansi tuku minangka bukti tuku kanggo klaim garansi.
Informasi Kontak:
- Websitus: www.bogen.com (Panggonan panggon, nyata URL bisa beda-beda)
- Layanan Pelanggan: Rujuk menyang websitus kanggo rincian kontak regional.